Rev-A-Shelf trash bin lid is a black replacement lid made for use with 35 and 50 quart containers in the RV Series. This Rev-A-Shelf waste bin lid measures 14 inches wide, 7/8 inch high, and 10-1/4 inches deep. Buyers replacing a worn cover on a cabinet waste basket lid or updating a trash can lid for a garbage pullout can use these dimensions to check fit before ordering. The product is sold each and is intended as a replacement bin accessory, not a full waste container. Because the lid adds height to RV Series waste containers, Rev-A-Shelf recommends adding 1 inch to the product height when measuring cabinet space. That extra clearance matters in pull-out trash areas and other tight cabinet openings.
Key specs to confirm: This waste bin lid is a Rev-A-Shelf RV Series replacement accessory for use with 35 and 50 quart containers. The verified lid size is 14 inches wide, 7/8 inch high, and 10-1/4 inches deep. Rev-A-Shelf notes that the lid adds to the height of RV Series waste containers and recommends adding 1 inch to the product height you are using when measuring your cabinet. Before ordering, confirm your container series, quart size, and available cabinet clearance. If you need safety, compliance, load, or other technical details, those are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: One black waste bin lid, sold each.
What to verify before ordering: Confirm that your existing bin is an RV Series 35 or 50 quart container, check the lid dimensions against your current part, and make sure your cabinet or garbage pullout has enough extra height for the lid once installed.
A replacement trash bin lid is usually purchased when the original cover is cracked, missing, or no longer practical for the way a cabinet waste system is used. In many kitchens, the bin itself is still serviceable, but the top piece needs to be replaced to keep the setup neat and usable. This Rev-A-Shelf waste bin lid is intended for that kind of straightforward parts replacement within the RV Series.
If you are maintaining a cabinet waste basket or a garbage pullout, the first question is fit. This lid is verified for use with 35 and 50 quart containers. That gives buyers a clear starting point, but it is still important to confirm your current bin size and series before placing the order. A similar quart size from another line may not match. The listed dimensions of 14 inches wide, 7/8 inch high, and 10-1/4 inches deep help you compare the replacement part to the bin you already have.
Another common issue is cabinet clearance. A trash can lid can change how a pull-out system fits under a countertop or below a drawer. Rev-A-Shelf specifically notes that these lids add to the height of RV Series waste containers and recommends adding 1 inch to the product height you are using. For installers and serious DIY buyers, that note is important because a lid that fits the bin may still create interference inside the cabinet if overhead space is tight.
This part also suits buyers who want a simple replacement rather than a full bin changeout. Because it is sold each, you can replace one lid as needed. That is useful in multi-bin layouts where only one cover is damaged. Whether you search by rev a shelf, revashelf, waste basket lid, or replacement trash bin lid, the practical buying focus stays the same: confirm the RV Series application, verify the quart size, and measure for added height before ordering.
When comparing replacement lids in general, the most important factors are compatibility, dimensions, and whether the product is clearly identified as a replacement accessory rather than a full bin. This Rev-A-Shelf trash bin lid gives buyers those core facts directly. It is identified as an RV Series replacement bin accessory, it is intended for use with 35 and 50 quart containers, and its dimensions are stated.
That matters because many replacement parts look similar in photos but differ in width, depth, or how they affect installed height. A generic waste bin lid may appear close enough, yet still create fit problems in a cabinet opening or pull-out frame. A product with a clear brand and application helps reduce that risk. In this case, Rev-A-Shelf and RV Series are both stated, which makes it easier to match the part to an existing setup.
Another point buyers often overlook is the effect on the surrounding cabinet space. This lid is only 7/8 inch high by itself, but the manufacturer also advises allowing 1 inch of added height when measuring the product in use. That is a useful distinction for cabinet planning. It reminds buyers to think beyond the loose part dimensions and check the real installed space needed above the container.
For trade buyers, maintenance teams, and homeowners replacing a worn lid, this kind of straightforward product data supports cleaner ordering decisions. The part is sold individually, the color is black, and the intended bin sizes are stated. If your application falls outside those verified facts, the right step is to confirm with the manufacturer or technical documents before purchase.
This Rev-A-Shelf waste bin lid is listed for use with 35 and 50 quart RV Series containers.
This replacement trash bin lid is listed for use with both 35 quart and 50 quart containers in the RV Series.
The Rev-A-Shelf trash bin lid measures 14 inches wide, 7/8 inch high, and 10-1/4 inches deep.
The waste bin lid adds to the height of RV Series waste containers, and Rev-A-Shelf recommends allowing 1 inch of added height.
This product is a black waste bin lid only and is sold each as a replacement accessory.
This trash can lid may work in a garbage pullout if your setup uses an RV Series 35 or 50 quart container and has enough top clearance.
The best check is to confirm your container series, quart size, current lid dimensions, and cabinet clearance before ordering.
The Rev-A-Shelf waste basket lid is black.
Installation details beyond fit are not provided here. Follow manufacturer installation guidance and local building requirements where applicable.
35 quart trash bin lid buyers should confirm bin series, quart size, and cabinet clearance before purchase. This Rev-A-Shelf replacement lid is a black RV Series accessory for use with 35 and 50 quart containers, and it is sold each. Check the verified dimensions of 14 inches wide, 7/8 inch high, and 10-1/4 inches deep against your current part. Because the lid adds height to the container, allow the recommended extra 1 inch in your cabinet measurement to avoid fit issues after installation.
Sold In: 1 Each
