Description
CompX National Disc Tumbler Cam Lock For Cabinets
CompX National disc tumbler cam lock gives drawers and cabinet doors a keyed locking point using a 1-7/16 inch cylinder that suits common furniture thicknesses. The 3/4 inch mounting hole specification lets you plan drilling accurately for repeatable layouts across a run of casework. A 90 degree clockwise rotation design turns the cam from open to locked in a short throw, which keeps motion tight and predictable on smaller drawer fronts and doors. The lock is intended for drawers and for right-hand or left-hand doors, so one part number can be used across different cabinet orientations on a project. Key removable operation in both locked and unlocked positions means the key can be taken out after setting either state, which helps when multiple users access the same cabinet during a workday.
Cam Lock Details That Support Cabinet Workflows
- The 1-7/16 inch cylinder length provides a known reference when laying out fronts and frames, which helps match lock reach to typical cabinet construction depths.
- The 3/4 inch mounting hole sizing standardizes boring operations, so installers can run consistent holes on drill presses or jigs without custom setups.
- The 90 degree clockwise rotation stop washer arrangement limits travel to a quarter turn, which simplifies how the cam aligns with strikes or frame edges.
- Suitability for drawers and both right-hand or left-hand doors reduces part variety on a job, which streamlines ordering and onsite organization.
- Key removable in both locked and unlocked positions supports keyed control while allowing users to leave the cabinet open or secured as needed.
Cam Lock Mounting And Cylinder Fit Considerations
The CompX National disc tumbler cam lock uses a 3/4 inch mounting hole, so the case or door panel is bored to that size before installing the cylinder. The 1-7/16 inch cylinder length creates the working envelope for how the lock passes through the front and any framing behind it. For overlay application, the combined thickness of front and frame cannot exceed the cylinder length listed, which ties material selection directly to this dimension. This relationship between cylinder length and overlay thickness guides planning when using thicker decorative fronts or build-ups on cabinet jobs.
Where This CompX Cam Lock Works Best
Using The Cam Lock On Drawers And Doors
This CompX National disc tumbler cam lock is specified for drawers and for right-hand or left-hand doors, so it fits typical cabinet, casework, and furniture layouts that need keyed security. The 90 degree clockwise rotation, set by the stop washer, lets the cam swing between open and closed positions without a long throw, which is useful on shallow drawer boxes or narrow stiles where over-rotation could cause interference. For overlay application, the requirement that the combined thickness of front and frame cannot exceed the cylinder length means it suits fronts and frames that stay within that 1-7/16 inch envelope. When planning overlay construction, using this limit helps align lock choice with the actual stack of materials on the door or drawer front.
Details That Help Achieve Repeatable Locking Results
The 3/4 inch mounting hole specification gives a fixed boring dimension that can be repeated with templates or drill presses, reducing variation from cabinet to cabinet. The clearly defined cylinder length becomes a planning dimension, tying the overlay thickness and frame build directly to the lock body so the cam sits where it can engage a strike or cabinet member. A 90 degree clockwise rotation range simplifies how the cam is oriented relative to keeper points, because only a quarter turn is used to transition from unlocked to locked. The key removable feature in both locked and unlocked positions supports flexible key handling, since the user can leave the lock open or closed without leaving the key in the cylinder, which matters in shared or frequently accessed storage.
Common Questions About The C8055-MKKD-14A Lock
What type of lock is the C8055-MKKD-14A?
The C8055-MKKD-14A is a CompX National disc tumbler cam lock, which provides a keyed cam action to secure drawers and cabinet doors in furniture and casework applications.
What cylinder length does this cam lock use?
The CompX National disc tumbler cam lock uses a 1-7/16 inch cylinder, giving a set length that must cover the combined thickness of the front and any surrounding frame in overlay applications.
What mounting hole size is required for installation?
The C8055-MKKD-14A cam lock is designed for a 3/4 inch mounting hole, so boring operations are based on that diameter when preparing drawers or doors.
How far does the cam rotate when locking?
The CompX National disc tumbler cam lock uses a stop washer that allows 90 degree clockwise rotation, giving a short, defined throw between unlocked and locked positions.
Where can this cam lock be used on cabinets?
The C8055-MKKD-14A is specified for drawers and for right-hand or left-hand doors, so it works across many cabinet and casework layouts.
How does key removal work on this cam lock?
The CompX National disc tumbler cam lock allows the key to be removable in both locked and unlocked positions, supporting flexible key handling while maintaining chosen lock status.
Selecting This Cam Lock For Cabinet Projects
The CompX National disc tumbler cam lock C8055-MKKD-14A offers a 1-7/16 inch cylinder, a 3/4 inch mounting hole, and 90 degree clockwise rotation tailored to drawers and right-hand or left-hand doors. The defined cylinder length and overlay thickness relationship help align lock choice with cabinet construction details. When a project needs keyed access on casework using these dimensions, this cam lock gives a focused option that matches typical drilling setups and door or drawer layouts.
