CompX National Disc Tumbler Cam Lock with 1-3/16" Cylinder, 90 Degree CW Rotation, 3/4" Mounting Hole C8053-C346A-4G
Description
CompX National Disc Tumbler Cam Lock For Cabinets
CompX National disc tumbler cam lock with 1-3/16 inch cylinder, 90 degree CW rotation, 3/4 inch mounting hole C8053-C346A-4G provides keyed security for drawers and right-hand or left-hand doors, so one lock style can cover multiple common cabinet layouts in the shop. The antique brass cam lock finish matches the CAM LOCK, ANTIQUE BRASS description, so the hardware blends with traditional cabinet and furniture projects instead of standing out. The 1-3/16 inch cylinder length sets how much material stack the lock can clamp through, which directly affects whether a given drawer or door thickness will seat properly on the cam. The 3/4 inch mounting hole requirement defines the boring operation on the panel, which saves layout time when standardizing drilling patterns across multiple pieces. The 90 degree CW rotation stop keeps handle movement short, which speeds operation for frequent access locations.
Key Working Details Of This Antique Brass Cam Lock
- Each lock comes with one stop washer which allows the cam to turn 90 degrees, so the rotation is positively limited for consistent locked and unlocked positions on drawers and doors.
- Cams for lipped or overlay construction use a straight cam with 1-1/2 inch extension, which reaches past face frames on overlay cabinets to engage the strike area reliably.
- Cams for flush construction use a formed cam with 1-1/8 inch extension and 11/32 inch offset, so the cam aligns with flush doors or drawer fronts without forcing or twisting.
- For overlay application, the combined thickness of front and frame cannot exceed the cylinder length listed, which sets a clear limit for material build-ups so the cam can still rotate freely.
- Key removable in both locked and unlocked positions allows the installer or user to leave the key out during normal operation or storage, which can simplify key control on the job.
Cam Lock Fit, Mounting Hole, And Cylinder Length
The 3/4 inch mounting hole specification defines the drill size for this CompX National disc tumbler cam lock, so fabricators can plan a single standard bore across different cabinets. The 1-3/16 inch cylinder length controls how much total thickness the lock can clamp through, which becomes critical when front and frame are stacked in overlay construction. For overlay application, the combined thickness of front and frame cannot exceed the cylinder length listed, so material selection and design stay within a working envelope. When an overlay construction uses a 3/4 inch front and a 3/4 inch frame, the product data directs the use of NLC8053 lock and NLC7014-2C cam, tying this dimension rule directly to part choice.
Using This Cam Lock In Real Cabinet Projects
Where This Cam Lock Works In Drawers And Doors
The web description states that this lock is for drawers and for right-hand or left-hand doors, so the same C8053-C346A-4G can be applied across multiple cabinet openings in an installation. The 90 degree CW rotation with a stop washer means that when the key turns, the cam only moves through a quarter turn, which suits tight spaces behind drawer fronts or within small casework. Cams for lipped or overlay construction are straight with 1-1/2 inch extension, giving extra reach behind overlapping fronts, which helps the cam catch the frame or strike area even when the door overlays the cabinet side. Cams for flush construction are formed with 1-1/8 inch extension and 11/32 inch offset, so the working surface of the cam aligns with flush faces, supporting a cleaner close without racking.
Details That Support Consistent Fit And Keying Control
The key removable in both locked and unlocked positions means the cylinder will release the key at either stop, which affects how users manage keys on site and can speed up access when many openings share the same layout. Stock keying options in the description specify KA, KD, and KDMKD, which define whether locks are keyed alike, keyed different, or keyed different and master keyed; this allows planning of security groups or zones within a project. The note that REMOVACORE versions of this lock are available shows that the C8053-C346A-4G platform supports removable cores, which can streamline re-keying work without changing the cabinet prep. The requirement that overlay thickness not exceed the cylinder length ties directly into reliable cam rotation, because staying within that limit avoids binding and helps the lock operate smoothly over time.
Common Questions About The C8053-C346A-4G Cam Lock
What type of applications use this CompX National disc tumbler cam lock?
This CompX National disc tumbler cam lock is described for drawers and for right-hand or left-hand doors, so it suits typical cabinet and furniture openings needing keyed access.
What mounting hole size does the C8053-C346A-4G cam lock require?
The C8053-C346A-4G cam lock is specified for a 3/4 inch mounting hole, which sets the drill size and helps standardize boring patterns across cabinet parts.
How far does the cam reach on overlay and flush constructions?
The overlay straight cam has a 1-1/2 inch extension, while the flush formed cam has a 1-1/8 inch extension with 11/32 inch offset, aligning the cam with different door and drawer layouts.
How does the 1-3/16 inch cylinder length affect cabinet design?
The 1-3/16 inch cylinder length sets the maximum combined thickness of front and frame for overlay applications, directly influencing material choices and construction buildup.
What keying options are described for this cam lock?
The description lists KA, KD, and KDMKD stock keying, allowing keyed alike, keyed different, or keyed different and master keyed setups to support project-specific security layouts.
Can the key be removed when this cam lock is unlocked?
The product description states the key is removable in both locked and unlocked positions, which allows users to remove keys after opening or securing a cabinet.
Select This Cam Lock For Fit, Finish, And Keying Layout
The CompX National disc tumbler cam lock with 1-3/16 inch cylinder, 90 degree CW rotation, 3/4 inch mounting hole C8053-C346A-4G combines an antique brass finish with defined cylinder length, mounting hole, and cam options for lipped, overlay, or flush construction. These verified details tie directly to boring patterns, front-plus-frame thickness, and reach behind the door or drawer front, which shortens layout time and supports repeatable fits across a run of cabinets. Matching the KA, KD, or KDMKD stock keying to the project plan turns this single cam lock style into a flexible platform for both security grouping and day-to-day access control.
