CompX National Disc Tumbler Cam Lock, Bright Nickel with 1-3/16" Cylinder, C8053-C415A-14A

CompX National Disc Tumbler Cam Lock For Casework

CompX National disc tumbler cam lock gives drawers and cabinet doors a keyed security point using a disc tumbler mechanism, which helps control access in shop-built or commercial casework where a compact lock body is preferred. The bright nickel finish provides a clean, neutral appearance, so the lock integrates well with typical hardware and visible trim in woodworking projects. A 1-3/16 inch cylinder length sets the basic door or drawer thickness range, which guides where this lock fits correctly in fronts and stiles. The lock is identified as model C8053-C415A-14A, tying the cam style and keying to a specific CompX family for repeat orders. Stock keying options KA, KD, and KDMKD define whether locks share keys or work with a master key, which matters when setting up storage zones for shared access or individual security in a shop or facility.

Cam Lock Details That Support Daily Use

• Bright nickel finish on the CompX National cam lock presents a neutral, project-friendly appearance, which works well in both residential and commercial cabinetry where visible hardware should stay understated yet consistent.
• A 1-3/16 inch cylinder length establishes the usable material stack the cam lock can span, which helps installers align the product with specific drawer fronts or door constructions during layout and boring operations.
• The disc tumbler cam lock design provides keyed control at the cam, which allows simple quarter-turn locking of cabinet doors or drawers without adding complex multi-point mechanisms, keeping installation straightforward.
• Stock keying options KA, KD, and KDMKD define whether locks share keys or tie into a master key, which lets facilities standardize access patterns across multiple cabinets or assign restricted zones as needed.
• Key removable in both locked and unlocked positions allows the operator to remove the key after locking or while open, which supports different lock-use routines in shops, offices, and storage areas.

Cam Lock Fit, Cylinder Length, And Overlay Limits

The cam lock uses a 1-3/16 inch cylinder length as the controlling fit dimension, so the combined thickness of the front and frame in overlay applications cannot exceed that cylinder length. That constraint sets the upper limit for material buildup when planning face frames and overlay doors around this lock. For overlay construction using a 3/4 inch front with a 3/4 inch frame, CompX specifies pairing the NLC8053 lock body with the NLC7014-2C cam, which shifts to a configuration suited for that thicker build. This guidance ties specific part numbers to a known overlay stack, helping shops keep repetitive cabinet runs consistent. The same fit principles apply when deciding whether to use the straight cam or formed cam on different cabinet constructions.

Using This Cam Lock In Cabinets And Casework

Applications On Drawers And Cabinet Doors

The CompX National disc tumbler cam lock is designed for drawers as well as right-hand or left-hand cabinet doors, giving flexibility across common casework layouts. That dual orientation helps when building banks of doors where swing direction varies, because the same lock family supports both sides. The web description specifies use on lipped or overlay construction with a straight cam providing a 1-1/2 inch extension, which allows the cam to reach and engage the strike area on overlay fronts. For flush construction, the formed cam with a 1-1/8 inch extension and 11/32 inch offset positions the cam properly relative to the door or drawer edge, helping it catch the frame without binding. A stop washer allows the cam to turn 90 degrees, translating the key rotation into a controlled quarter-turn cam motion, which simplifies alignment of the locked and unlocked positions during layout and drilling.

Cam Options And Keying For Repeatable Results

The stop washer on this cam lock limits travel to a 90 degree turn, which reduces over-rotation and helps keep the cam consistently aligned with the strike or frame contact point. That predictability is useful when installing multiple locks across a project, because each lock behaves the same way when keyed. Cams are specified for both lipped or overlay and flush constructions, giving installers defined extension lengths and offsets to match their door style, which reduces rework from trial-and-error cam bending. The formed cam with 11/32 inch offset is tailored to flush situations, while the straight cam with 1-1/2 inch extension reaches farther on overlay layouts. Key removable in both locked and unlocked positions lets users remove the key after securing the cabinet or leave the lock keyed open during frequent-access periods, which supports different workflow patterns in shops or offices. Stock keying options KA, KD, and KDMKD also allow planners to set up keyed-alike groups or master keyed systems using defined CompX key schemes.

Common Questions About This CompX Cam Lock

Selecting This Cam Lock For Your Project

This CompX National disc tumbler cam lock in bright nickel, with its 1-3/16 inch cylinder length, straight and formed cams, and 90 degree stop washer, is grounded in specific dimensions for drawers and cabinet doors. The key removable feature in both locked and unlocked positions and the KA, KD, and KDMKD stock keying options tie this model to flexible security setups in woodworking, office, or storage projects. When a defined cylinder length, known cam extensions, and clear keying options matter for repeatable cabinet runs, this C8053-C415A-14A cam lock offers a focused, part-numbered solution.