Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
CompX National disc tumbler cam lock, bright nickel with 1-7/16 inch cylinder, C8055-C413A-14A gives you a defined locking point for drawers and both right-hand and left-hand doors, so one lock style can cover multiple cabinet orientations. The bright nickel finish identifies the lock visually at the cabinet face, which helps during layout and service work. This lock is categorized as a cam lock, so it uses interchangeable cams to engage a strike or frame, letting you adapt the same body to different cabinet constructions. The manufacturer part number C8055-C413A-14A ties directly to the 1-7/16 inch cylinder length, which matters when you are matching lock depth to the combined thickness of the front and frame. Being a disc tumbler design, this lock works with its specified keying options to control access consistently across a bank of cabinets.
The cylinder length listed for this cam lock determines how much combined thickness from front and frame it can span, which directly affects whether the threaded body will seat correctly through the boring and secure with the mounting nut. For overlay applications, the description states that the combined thickness of front and frame cannot exceed the cylinder length, so this 1-7/16 inch cylinder is suited where that build-up is within that dimension. The web description notes that using a 3/4 inch front with a 3/4 inch frame in overlay construction calls for a different lock and cam combination, so this model fits better where the total is less than that heavier 1-1/2 inch stack. With the specified cylinder depth matched to your panel build, the cam will swing freely without binding on the front edge.
This CompX National disc tumbler cam lock is described for use on drawers and on both right-hand and left-hand doors, so it suits typical cabinet casework where you need keyed control on multiple opening types. The cams called out in the description are arranged for lipped or overlay construction using a straight cam with 1-1/2 inch extension, so it can bridge from the lock body to a frame edge on overlay designs. For flush construction, the formed cam with 1-1/8 inch extension and 11/32 inch offset moves the contact point inward, letting the cam clear the flush front and still catch the frame. A trim washer is specified, which seats against the front surface and provides a finished bearing surface around the cylinder. A spur washer is specified for wood applications, so the lock can bite into the wood face and resist rotation when the cam is turned against the frame.
The description states that each lock uses a stop washer which allows the cam to turn 90 degrees, so the rotation is limited to a quarter-turn, giving a clear locked and unlocked position that is easy to repeat. The key is removable in both locked and unlocked positions, which means you can leave the cylinder without a key regardless of cam position, supporting situations where the cabinet sometimes operates unsecured. Two cams are specified, one straight and one formed, so you can choose the geometry that best aligns the cam tip with the frame, helping reduce slop and misalignment in the locked position. The notation about stock keying options KA, KD, and KDMKD describes how groups of locks can be keyed alike, keyed different, or keyed different and master keyed, so you can plan whether a single key should operate multiple locks or keep them separate. REMOVACORE versions are mentioned, indicating that alternate cores are available for this lock pattern when re-coring needs to follow that system.
The CompX National disc tumbler cam lock C8055-C413A-14A uses a 1-7/16 inch cylinder, which sets how much combined front and frame thickness it can span in a cabinet.
The straight cam specified for lipped or overlay construction has a 1-1/2 inch extension, letting the cam reach from the lock body to the frame or strike on overlay layouts.
Flush construction uses the formed cam with a 1-1/8 inch extension and 11/32 inch offset, positioning the cam tip to catch the frame while clearing a flush cabinet front.
The stop washer on this cam lock allows the cam to turn 90 degrees, providing a quarter-turn action between locked and unlocked positions for consistent operation.
This CompX National cam lock is described for drawers and for right-hand or left-hand doors, so it fits common cabinet openings needing a keyed cam action.
The key on this disc tumbler cam lock is removable in both locked and unlocked positions, allowing the cabinet to be left locked or unlocked without a key hanging in the cylinder.
The CompX National disc tumbler cam lock C8055-C413A-14A, with its 1-7/16 inch cylinder and bright nickel face, ties neatly to cabinet fronts where the combined front and frame thickness fits within that depth. With cams specified for both lipped or overlay and flush construction, the same lock body can serve different casework builds while still landing the cam on the frame. The defined 90 degree rotation and key removable in either position support straightforward daily use across drawers and right-hand or left-hand doors, making this part suited to projects where consistent keyed control is required.
Sold In: 1 Each
