Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
CompX National disc tumbler cam lock is a cam lock in antique brass with a 1-3/16 inch cylinder, so it provides a compact keyed locking point where a short cylinder length is required. The lock uses a disc tumbler mechanism, which provides a defined keying system for controlled access in cabinetry or similar applications. The antique brass finish gives the lock a traditional appearance, which helps it blend into projects using warm-toned decorative hardware. The manufacturer part number C8053-C390A-4G identifies this specific configuration, which matters when matching locks across multiple cabinets or reordering the same setup. This lock is part of the cam locks product class within locks and latches, so it is suited to flat panel doors, drawers, and similar closures that accept a rotating cam to secure the front.
The 1-3/16 inch cylinder length defines how thick the front and frame can be in overlay use before the threads and cam engagement become too short, so matching this dimension to panel build-up is a key planning step. For overlay applications, the requirement that combined front and frame thickness cannot exceed the listed cylinder length helps determine when this model fits a cabinet without altering the construction. The presence of a spur washer for wood in the supplied components is intended to bite into wooden material, which helps resist rotation of the cylinder during tightening on wood doors or drawers. A trim washer in the supplied parts provides a finished bearing surface around the cylinder, which helps the face of the lock sit neatly against the door or drawer front.
This cam lock is specified for drawers, so it can secure pull-out storage where a rear catch surface is available for the cam swing. The same lock is specified for right-hand or left-hand doors, which allows the installer to use one model throughout a run of cabinets regardless of door swing. For lipped or overlay construction, the straight cam with 1-1/2 inch extension reaches behind the overlay front, so it can engage a frame or strike that sits inboard of the door edge. For flush construction, the formed cam with 1-1/8 inch extension and 11/32 inch offset positions the cam face closer to the frame plane, so it aligns with a frame surface that is even with the door front. In overlay scenarios, the statement that the combined thickness of front and frame cannot exceed the listed cylinder length means the 1-3/16 inch cylinder is suited to relatively moderate build-ups, such as many cabinet fronts.
The key removable feature in both locked and unlocked positions allows the key to be withdrawn after locking or after opening, so users do not need to leave the key in place and can move between cabinets efficiently. Stock keying options KA, KD, and KDMKD are described in the product data, so projects can be planned with all locks keyed alike, all keyed different, or keyed different with a master key option for controlled master access. The mention that REMOVACORE versions are available indicates that a removable core variant exists in this family, which can matter on facilities that change cores as staff or security needs change. The availability of cams for both lipped/overlay and flush construction means the locking action can be tuned to different cabinet face conditions, supporting consistent engagement without modifying door or frame geometry. The requirement that overlay front and frame thickness stay within the cylinder length helps maintain proper thread engagement on the mounting nut, which supports stable cam alignment over repeated locking cycles.
This CompX National cam lock uses a disc tumbler mechanism, which provides a keyed locking action suitable for controlled access on drawers and cabinet doors.
This antique brass cam lock is specified for drawers and for right-hand or left-hand doors, so it suits a range of cabinet fronts in furniture or casework.
The 1-3/16 inch cylinder length limits how thick the combined front and frame can be in overlay applications, which determines whether this model suits a given cabinet build-up.
This lock uses a straight cam with 1-1/2 inch extension for lipped or overlay construction and a formed cam with 1-1/8 inch extension and 11/32 inch offset for flush construction, so the cam matches the cabinet face style.
This cam lock has a key removable in both locked and unlocked positions, so users can take the key out after unlocking without leaving it in the cylinder.
The C8053-C390A-4G part number identifies this specific CompX National antique brass cam lock configuration, which helps match existing installations and streamline reordering.
This CompX National disc tumbler cam lock in antique brass with a 1-3/16 inch cylinder, defined cams for overlay and flush construction, and key removable in both positions gives a clear, repeatable locking setup for drawers and right- or left-hand doors. By using the specified cylinder length and cam extensions as planning guides, this C8053-C390A-4G model can be matched to cabinet fronts and frames so the cam lands on a solid strike surface and the cylinder seats properly. For projects that require coordinated appearance and consistent keying patterns, this defined part number and configuration support straightforward selection and duplication across multiple cabinets.
Sold In: 1 Each
