CompX National Disc Tumbler Cam Lock 15/16" Cylinder with 90 Degree CW Rotation, 3/4" Mounting Hole C8054-C346A-14A
Description
CompX National Disc Tumbler Cam Lock For Cabinets
CompX National disc tumbler cam lock 15/16 inch cylinder with 90 degree CW rotation, 3/4 inch mounting hole C8054-C346A-14A gives you a defined 90 degree turn for positive locked and unlocked positions on cabinet jobs. The 15/16 inch cylinder length provides reach through typical cabinet fronts, while the 3/4 inch mounting hole specification sets the boring size for clean, repeatable installation in wood or metal. The bright nickel finish on this cam lock creates a finished appearance in visible cabinet locations. The lock is designed for drawers and for right-hand or left-hand doors, so one part number can be used across multiple cabinet layouts in the same project. Key removable in both locked and unlocked positions lets you remove the key after operating the lock in either position, which simplifies workflow when working through banks of drawers or doors.
Key Cam Lock Details That Support Cabinet Work
- This cam lock is specified for drawers and for right-hand or left-hand doors, so a single lock style can serve mixed cabinet runs without changing your boring setup or hardware layout.
- The cylinder provides 90 degree CW rotation controlled by a stop washer, giving a consistent swing from locked to unlocked that helps align strikes and cams across multiple doors.
- A straight cam with 1-1/2 inch extension is specified for lipped or overlay construction, so the reach is set to engage behind the cabinet frame on overlay fronts.
- A formed cam with 1-1/8 inch extension and 11/32 inch offset is specified for flush construction, allowing the offset to clear the front and catch the interior frame on flush doors.
- Key removable in both locked and unlocked positions lets you turn and pull the key immediately after locking or unlocking, which speeds repetitive operations on larger installations.
Cam Lock Mounting Hole And Overlay Guidance
The specified 3/4 inch mounting hole defines the boring size for this cam lock, so drill operations can be standardized across drawer and door fronts. The product information states that for overlay application, the combined thickness of front and frame cannot exceed the cylinder length listed, which ties the cylinder reach directly to your overlay stack-up. The same information notes that to accommodate an overlay construction using a 3/4 inch front and a 3/4 inch frame, the NLC8053 lock and the NLC7014-2C cam are specified, so this C8054-C346A-14A lock is targeted to other front and frame combinations.
How This C8054-C346A-14A Lock Fits Real Jobs
Using The Cam Lock On Drawers And Doors
This CompX National cam lock is designated for drawers and for right-hand or left-hand doors, so it works across typical cabinet fronts without changing lock style mid-project. The 90 degree CW rotation defined by the stop washer gives a quarter-turn motion from locked to unlocked, which is familiar to users and straightforward during installation. For lipped or overlay construction, the straight cam with 1-1/2 inch extension is called out, so the cam can reach behind the cabinet frame on overlays. For flush construction, the formed cam with 1-1/8 inch extension and 11/32 inch offset is specified, allowing the cam to clear the door edge and engage a keeper or frame inside a flush opening. The bright nickel description ties this lock into hardware selections where a bright metal look is planned across visible faces.
Details That Help Alignment And Repeatable Layout
The 3/4 inch mounting hole requirement means the same hole size is used wherever this lock is installed, simplifying jig design and drilling sequences for casework runs. The defined 90 degree CW rotation, controlled by the supplied stop washer, sets a fixed travel angle, which helps align cams consistently so they engage in the same location on each unit. The statement that the combined thickness of front and frame cannot exceed the cylinder length listed below ties material selection directly to the lock cylinder reach, supporting predictable engagement without overextending the cam. Key removable in both locked and unlocked positions supports straightforward operation, because installers and end users can remove the key in whichever position matches their workflow. The availability of REMOVACORE versions of this lock means core changes can be addressed using that system when cylinder interchangeability is part of the project plan.
Common Questions About The C8054-C346A-14A Lock
What cylinder length does the C8054-C346A-14A cam lock use?
The C8054-C346A-14A cam lock uses a 15/16 inch cylinder, which relates directly to how far the lock body can extend through the cabinet front and frame assembly.
What mounting hole size is required for this cam lock?
This CompX National disc tumbler cam lock is specified for a 3/4 inch mounting hole, so boring tools and jigs can be set to that single size across installations.
How far does the cam reach on overlay cabinet construction?
For lipped or overlay construction, the straight cam has a 1-1/2 inch extension, allowing the cam to reach and engage behind the cabinet frame on overlay doors or fronts.
How does this cam lock handle flush cabinet construction?
For flush construction, the formed cam has a 1-1/8 inch extension with an 11/32 inch offset, which lets the cam clear the front and catch the internal frame or keeper.
Can the key be removed when the cam lock is unlocked?
The key on this cam lock is removable in both locked and unlocked positions, so users can take the key out after either operation without leaving it in the cylinder.
What keying options are specified for this cam lock family?
The stock keying information notes KA for all keyed alike, KD for all keyed different, and KDMKD for all keyed different and master keyed within the lock family.
Select The Right Cam Lock For Your Cabinet Layout
This CompX National disc tumbler cam lock with 15/16 inch cylinder, 3/4 inch mounting hole, and 90 degree CW rotation is configured for drawers and right- or left-hand doors, giving one solution across multiple cabinet types. The specified straight and formed cams address lipped or overlay and flush construction, so cabinet layouts can be matched to the correct cam extension and offset. When the front and frame thickness fit the cylinder length guidance, this C8054-C346A-14A cam lock provides a consistent motion and appearance for casework using bright nickel hardware.
