CompX National Disc Tumbler Cam Lock, 1-7/16" Cylinder with 90 Degree CW Rotation, 3/4" Mounting Hole C8055-KD-14A

CompX National Disc Tumbler Cam Lock For Cabinets

CompX National disc tumbler cam lock C8055-KD-14A provides keyed security for drawers and cabinet doors using a 1-7/16 inch cylinder, so you can lock standard casework while keeping hardware layout predictable across a project. The bright nickel finish on this cam lock gives a clean, professional look that matches common bright cabinet hardware, helping installations blend into commercial or residential millwork. A 3/4 inch mounting hole is specified, which lets you bore a consistent size opening and speed layout across multiple doors or drawers. The 90 degree clockwise rotation is controlled with the supplied stop washer, so the cam reliably turns a quarter turn to lock or unlock without over-rotation. This lock is keyed different (KD), which assigns various lock numbers so each unit uses its own key pattern where separate access is needed.

Key Cam Lock Details That Support Daily Use

• The 1-7/16 inch cylinder length gives you a defined maximum combined thickness for front and frame in overlay applications, which keeps the locking cam engaging properly on typical cabinet builds.
• The 3/4 inch mounting hole requirement lets you standardize boring operations on doors and drawer fronts, improving repeatability when you are setting up for a run of cabinets.
• The bright nickel finish on this cam lock presents a neutral metallic appearance, which pairs well with many other bright cabinet components in offices, shops, or residential spaces.
• The 90 degree clockwise rotation controlled by the stop washer sets a predictable quarter-turn movement, which helps operators understand the locked and unlocked positions quickly in daily use.
• The KD keying (all keyed different) keeps each lock on its own key number, which is useful where separate access control is wanted without master key operation.

Cam Lock Mounting, Rotation, And Construction Use

This CompX National disc tumbler cam lock uses a 3/4 inch mounting hole, so the cylinder installs through a standard bore in the cabinet front. The lock is designed for drawers, right-hand doors, or left-hand doors, giving flexibility to use the same part across different openings in a run. A stop washer is provided to allow a 90 degree turn of the cam, so the lock throws with a quarter turn and then stops, helping align the cam with strikes or cabinet framing. For overlay application, the combined thickness of front and frame cannot exceed the cylinder length, which keeps the cam within its designed reach to catch lipped or overlay construction. Key removable function in both locked and unlocked positions lets users remove the key after locking or leaving the lock open, which can match different access routines in a shop or office.

Where This C8055-KD-14A Cam Lock Works Best

Using The Cam Lock On Drawers And Doors

This C8055-KD-14A bright nickel cam lock is specified for drawers and for right-hand or left-hand cabinet doors, so one model can serve multiple door swings and drawer layouts in the same project. Cams are specified for lipped or overlay construction using a straight cam with 1-1/2 inch extension, or for flush construction using a formed cam with 1-1/8 inch extension and 11/32 inch offset, so the cam geometry is matched to either face-frame style overlays or flush fronts. For overlay applications, the note that combined thickness of front and frame cannot exceed the cylinder length ties directly to the 1-7/16 inch cylinder, so the lock can reach around the front to engage the frame without binding. The KD stock keying keeps each opening on a distinct key number, which suits individual locking on desks, storage cabinets, or casework where shared keys are not desired.

Details That Support Repeatable Lock Installation

The 3/4 inch mounting hole requirement allows you to set up drilling operations with a single bit size, which reduces layout time and cuts rework when installing multiple locks. The stop washer that allows 90 degree rotation creates a fixed travel for the cam, which helps align the locking point with strikes or cabinet edges consistently from unit to unit. The availability of cams for both lipped or overlay construction and flush construction means the same core lock body can be used across different cabinet builds by matching the specified cam extension and offset, which simplifies part selection on jobs that mix face-frame and flush fronts. Key removable in both locked and unlocked positions lets the user remove the key after locking or leave the cylinder key-free when unlocked, supporting different access routines in shared workspaces or private storage. REMOVACORE versions are stated as available, which indicates the same basic lock design can be used in systems where removable cores are part of the locking plan.

Common Questions About The C8055-KD-14A Cam Lock

Selecting This Cam Lock For Cabinet Projects

The CompX National disc tumbler cam lock C8055-KD-14A pairs a 1-7/16 inch cylinder, 3/4 inch mounting hole, and bright nickel finish to outfit drawers and right- or left-hand doors in one part number. Specified cams for lipped or overlay and flush construction, along with 90 degree clockwise rotation using the stop washer, help align the lock action with common cabinet layouts. KD keying provides separate key numbers where individual access is desired. For cabinet, desk, or storage builds using these dimensions and functions, this cam lock offers a defined, repeatable locking setup.