CompX National Disc Tumbler Cam Lock, 1-7/16" Cylinder with 90 Degree CW Rotation, 3/4" Mounting Hole C8055-C346A-14A
Description
CompX National Disc Tumbler Cam Lock For Cabinet Use
CompX National disc tumbler cam lock gives you key-controlled locking for drawers and right-hand or left-hand doors, so one lock style can be used across matching casework runs. The 1-7/16 inch cylinder length supports applications where more reach through the front and frame is required, which helps when locking thicker cabinet constructions. A 3/4 inch mounting hole dimension defines the required boring size, so shop layouts can be standardized around this diameter. Bright nickel finish on the cam lock provides a clean, metallic appearance that aligns with common commercial hardware. This cam lock is designed to turn 90 degrees clockwise, which provides a defined motion range that simplifies layout of strikes and cams in the cabinet or fixture.
Key Cam Lock Details That Support Cabinet Work
- The 90 degree clockwise rotation defines how far the cam travels, which helps position strikes or engagement points so doors and drawers secure reliably without over-travel.
- The 1-7/16 inch cylinder length sets how much lock body projects through the material, which matters when matching lock depth to front and frame thickness.
- The 3/4 inch mounting hole size determines the boring operation, allowing a consistent drill size to be used across casework for this model.
- The cam lock works on drawers and right-hand or left-hand doors, so a single part number can address multiple cabinet orientations in one project.
- The bright nickel cam lock finish visually coordinates with other bright nickel hardware, supporting a uniform hardware appearance on finished pieces.
Cam Lock Mounting, Hole Size, And Rotation Details
This cam lock is sized for a 3/4 inch mounting hole, so boring operations can be planned around that fixed diameter across panels. The 1-7/16 inch cylinder length provides capacity to span front and frame material up to that depth, which affects how the cam sits behind the closing surface. A defined 90 degree clockwise rotation means the installer or fabricator can align cams and strikes to operate within a quarter turn, supporting predictable handle travel on drawers and doors.
Using This Cam Lock In Cabinet And Fixture Builds
Where This CompX Cam Lock Is Typically Applied
This CompX National cam lock is specified for drawers and right-hand or left-hand doors, placing it in typical cabinet, fixture, and casework applications. In many layouts, a 3/4 inch mounting hole is compatible with common drilling patterns, so this dimension integrates smoothly with standard shop tooling. The 1-7/16 inch cylinder length is suited to fronts and frames whose combined thickness approaches that dimension, giving a solid mechanical engagement of the lock body through the material. Bright nickel finish aligns well with bright nickel latches, pulls, or hinges, allowing a coordinated visual specification on the project. The disc tumbler cam lock mechanism provides key-controlled locking, which is important wherever controlled access to drawers or doors is needed in a woodworking or commercial environment.
Why The Cylinder, Hole, And Rotation Details Matter
The 3/4 inch mounting hole specification lets installers plan boring operations in advance, which reduces layout time when multiple locks are used across cabinets. Because the cylinder measures 1-7/16 inch in length, the lock body can extend through thicker front and frame sections without leaving the cam unsupported, which helps alignment and smooth turning. The 90 degree clockwise rotation provides a quarter-turn action, and that clear travel range helps position the cam so it engages and releases the strike predictably. Using the same cam lock for drawers and both right-hand and left-hand doors simplifies product selection and stocking, since one lock configuration can address several orientations. The bright nickel description helps designers match this cam lock to other bright nickel components, creating a unified hardware look while maintaining the specified lock performance.
Common CompX Cam Lock Questions From Installers
What mounting hole size does this cam lock require?
The CompX National disc tumbler cam lock uses a 3/4 inch mounting hole, so drilling can be set to that fixed diameter across cabinet fronts.
How long is the cylinder on the C8055-C346A-14A lock?
The C8055-C346A-14A cam lock has a 1-7/16 inch cylinder, allowing the lock body to span thicker front and frame combinations where that length is needed.
What rotation does this bright nickel cam lock provide?
The bright nickel cam lock is designed for 90 degree clockwise rotation, giving a defined quarter-turn travel for engaging or releasing the cam.
Can this cam lock be used on both doors and drawers?
This CompX National disc tumbler cam lock is specified for drawers and for right-hand or left-hand doors, so one lock type serves multiple cabinet positions.
What cam extensions are referenced for different constructions?
The web description notes a straight cam with 1-1/2 inch extension for lipped or overlay construction and a formed cam with 1-1/8 inch extension and 11/32 inch offset for flush construction.
How does key removal work on this cam lock?
The cam lock is described as key removable in both locked and unlocked positions, which allows the key to be taken out after turning to either position.
Selecting This Cam Lock For Cabinet Security
Choose this CompX National disc tumbler cam lock when a 3/4 inch mounting hole and a 1-7/16 inch cylinder length match your cabinet fronts and frames. The 90 degree clockwise rotation and bright nickel finish align this specific cam lock with typical commercial cabinet, fixture, and woodworking hardware layouts.
