Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Aspire cabinet knob in brushed tin is a zinc knob designed for cabinet doors or drawers where a compact, modern pull is needed. The knob length of 1-1/4 inches provides a defined grip point that fits comfortably between fingers during everyday use. A 3/4 inch width creates a slimmer profile that suits narrower rails and stiles while still offering enough surface area to grab. The projection of 1-3/16 inches spaces hands away from the cabinet face, helping reduce contact marks on finished surfaces. An 11/16 inch base diameter keeps the footprint tight, which helps when laying out multiple knobs on smaller drawer fronts. The brushed tin finish presents a muted metallic look that coordinates with other brushed tin decorative hardware on the same run of cabinets.
This Berenson Aspire Series knob uses an 8-32 x 1 inch screw size, so it mounts through a drilled hole using a standard machine screw thread commonly used in cabinet work. The compact 11/16 inch base diameter centers easily over a typical knob bore, which helps keep the knob aligned square to the door or drawer face during tightening. With a projection of 1-3/16 inches, the installed knob stands far enough off the surface to clear typical door profiles, supporting a direct pull without knuckles dragging the finish. The 1-1/4 inch overall length works well with typical knob layout spacing, allowing installers to repeat the same measurements across a run of cabinet fronts for a consistent look.
The Berenson Aspire Series brushed tin knob fits cabinet doors and drawers that benefit from a compact pull with a modern, linear look. Its 1-1/4 inch length keeps the knob scaled for standard face-frame and frameless cabinetry, so it does not dominate smaller fronts. The 3/4 inch width supports use on narrower rails, where wider pulls could overhang or crowd adjacent joints. With an 11/16 inch base diameter, the knob fits comfortably on narrow stile material while still covering a typical bore. The brushed tin finish lets this knob sit alongside other brushed tin decorative hardware, which supports cohesive hardware selection on kitchen, bath, or built-in projects using similar finishes.
The specified 8-32 x 1 inch screw size gives installers a known machine thread and length to work with, which speeds layout when drilling and fitting multiple doors and drawers on a project. The 1-3/16 inch projection remains consistent from piece to piece, helping doors and drawers align visually when cabinets are closed, especially when mixed with other Aspire Collection hardware in the same plane. The defined 1-1/4 inch length and 3/4 inch width provide fixed reference dimensions, which is useful when replacing existing knobs and wanting the new hardware to stay inside previous shadow lines. The 11/16 inch base diameter also assists replacement work because it covers many existing knob imprints while staying small enough for tight frame conditions. Because the knob is made from zinc with a brushed tin finish, the finish and substrate stay consistent across multiples of the same part number, which simplifies ordering by letting installers specify 9244-10BT-P for repeat jobs.
The Berenson Aspire knob has a 1-1/4 inch length, 3/4 inch width, 1-3/16 inch projection, and an 11/16 inch base diameter, which defines its overall footprint and how far it stands off the cabinet face.
The 9244-10BT-P knob is made from zinc with a brushed tin finish, giving it a metal construction with a muted metallic appearance that coordinates with other brushed tin hardware.
This brushed tin cabinet knob is specified for an 8-32 x 1 inch screw size, so it pairs with standard 8-32 machine screw threading commonly used in cabinet installations.
The Berenson Aspire cabinet knob projects 1-3/16 inches from the cabinet surface, providing finger clearance and helping hands avoid rubbing against the door or drawer face during operation.
This 1-1/4 inch knob suits cabinet doors and drawers that need a compact pull, matching well with standard face-frame or frameless cabinets and narrower drawer fronts.
The 11/16 inch base diameter keeps the contact area small, which helps when positioning the knob on narrow stiles or when aligning replacements over existing knob bores.
The Berenson Aspire Series brushed tin 9244-10BT-P knob offers defined dimensions, a zinc construction, and an 8-32 x 1 inch screw size that align with standard cabinet hardware practice. Those fixed specifications support consistent layout, straightforward installation, and matching with other brushed tin decorative hardware on the same project. For cabinet doors or drawers that call for a compact, modern pull, this Aspire knob provides a clearly documented option ready to integrate into your next run of cabinetry.
Sold In: 1 Each
