Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Aspire brushed gold pull is a cabinet handle from the Aspire Collection that provides a transitional style, giving cabinet runs a bridge between traditional profiles and more modern lines for projects that need versatile visual alignment. The pull is made from zinc, which creates a solid metal component for day-to-day cabinet use in kitchens, baths, or shop-built casework where metal hardware is expected to handle regular contact. Its modern brushed gold finish delivers a muted gold tone, helping it sit comfortably with other brushed fixtures on the job instead of fighting highly polished metals. With a center to center measurement of 3-3/4 inches, also listed as 128 mm, this pull lines up with drilling patterns that follow that common spacing, supporting straightforward layout on new doors and drawer fronts. The Aspire name and Berenson branding identify it as part of a coordinated decorative hardware family for matching projects.
This Aspire pull has a center to center measurement of 3-3/4 inches, or 128 mm, giving installers a clear drilling reference when laying out hardware on doors and drawers that follow that spacing. The overall length of 4-1/8 inches defines how much linear space the pull covers on the face, useful when balancing it against rail widths and stile dimensions. A projection of 1-1/4 inches sets how far the pull stands off the cabinet face, providing finger clearance during operation without reaching excessively into the room. The base diameter of 5/16 inch indicates the footprint at each mounting point, which matters when aligning the pull with narrow rails. A width of 11/16 inch defines the gripping area across the bar, helping installers picture the pull in proportion to smaller drawer fronts.
This Berenson Aspire cabinet pull belongs to the Decorative Hardware & Moldings category, specifically in Handles and Pulls, positioning it for use on cabinet doors and drawer fronts rather than as a structural component. Its transitional style works on projects where shaker, flat-panel, or other moderate-profile fronts appear, helping tie mixed fronts into a single hardware story. The modern brushed gold finish supports use in spaces where brushed fixtures are specified, allowing this pull to visually connect with faucets, lighting trim, or other metal details carrying similar tones. With a 3-3/4 inch center to center layout, the pull fits cabinets drilled on that standard spacing, which is common across many residential cabinet runs, so it can be used on doors, drawers, and built-ins that share that pattern. The Aspire Collection reference means it can be combined with other Aspire pieces carrying the same style language when a project calls for coordinated hardware selections.
The 128 mm center to center dimension on this Aspire zinc pull gives installers a metric reference alongside the 3-3/4 inch measurement, which is useful when working from metric shop drawings or jigs that reference millimeters. The 4-1/8 inch total length sets predictable edge clearances when centering the pull on drawer faces, supporting consistent reveals from piece to piece across a kitchen or office installation. A 1-1/4 inch projection defines a fixed stand-off from the cabinet face, which helps installers anticipate hand clearance and alignment relative to other hardware components in tight galley layouts. The 11/16 inch width and 5/16 inch base diameter frame the pull as a moderate-scale handle, letting installers visually balance it against narrow and mid-width fronts without overwhelming smaller doors. The specific manufacturer part number 2131-1MDB-P simplifies reordering or matching hardware during future phases, reducing time spent tracking down exact finish and size combinations.
The Berenson Aspire brushed gold pull has a 3-3/4 inch, or 128 mm, center to center spacing, aligning with common cabinet drilling patterns for straightforward layout.
The 2131-1MDB-P Berenson Aspire pull has an overall length of 4-1/8 inches, which defines the space it covers across the cabinet face during installation.
This modern brushed gold cabinet pull is made from zinc, providing a solid metal handle for operating cabinet doors and drawers in everyday use.
This transitional cabinet pull projects 1-1/4 inches from the cabinet face, establishing a fixed stand-off that affects finger clearance and alignment.
The Berenson Aspire zinc pull has a width of 11/16 inch, defining the gripping surface across the bar when mounted on cabinet fronts.
This Berenson Aspire cabinet pull has a modern brushed gold finish, offering a brushed gold tone suited to projects using similar metal finishes.
The Berenson Aspire brushed gold pull combines a 3-3/4 inch (128 mm) center to center layout, zinc construction, and a modern brushed gold finish, giving installers a defined size and look for cabinet projects. Its Aspire Collection and transitional style positioning support use across mixed-profile fronts where a single hardware design is preferred. With a 4-1/8 inch overall length, 1-1/4 inch projection, and 11/16 inch width, it offers predictable proportions that translate cleanly from doors to drawers. Choose this 2131-1MDB-P pull when a coordinated, brushed gold handle is needed across multiple cabinet pieces.
Sold In: 1 Each
