Berenson Aspire Series 6-5/16" (160 mm) Center to Center Brushed Copper Pull, - 2144-10BC-P

Berenson Aspire Brushed Copper Cabinet Pull Use

Berenson Aspire brushed copper pull is a transitional cabinet handle that combines a 6-5/16 inch (160 mm) center to center mounting size with a 6-1/2 inch overall length, giving cabinets a balanced look that fits common drill layouts. The brushed copper finish provides a warm metallic appearance that suits both traditional and contemporary projects, helping one pull style work across mixed-door kitchens or built-ins. Its zinc material creates a solid-feeling handle that supports everyday cabinet and drawer use. A 1-1/4 inch projection sets the hand clearance away from the door face, helping fingers grab the pull without rubbing the surface. The 11/16 inch width presents a comfortable gripping surface that feels substantial without crowding narrow drawer fronts. A 5/16 inch base diameter defines the footprint at each contact point on the cabinet, which helps plan layout around edge profiles and neighboring hardware.

Key Aspire Brushed Copper Pull Details In Practice

• The Aspire Series and transitional style identity give this pull a design that sits between modern and classic, making it suitable for projects that blend Shaker doors, flat fronts, or simple raised panels in the same run.
• The 6-5/16 inch (160 mm) center to center dimension aligns with a widely used drilling pattern, which supports straightforward layout across banks of drawers or doors when spacing multiple pulls on long cabinet runs.
• The 6-1/2 inch overall length provides visible presence on larger fronts while still fitting mid-size doors, helping maintain consistent proportions from base cabinets to tall pantry or vanity applications.
• The brushed copper finish offers a muted metallic tone rather than a mirrored surface, which can help reduce the visual impact of fingerprints while adding contrast against painted or stained wood fronts.
• The zinc construction creates a durable-feeling pull body that handles repeated opening and closing on busy kitchen, bath, or shop cabinets without feeling flimsy during use.
• The Berenson Corporation brand and 2144-10BC-P part number give a clear reference for matching pulls later, aiding future additions or replacements in multi-phase cabinet projects.

Berenson Aspire Pull Mounting And Fit Details

The 6-5/16 inch center to center measurement defines exactly where to drill the two mounting holes, which keeps this Aspire pull aligned with standard 160 mm cabinet boring jigs. With its 6-1/2 inch overall length, the pull slightly overhangs the hole spread, creating even ends that frame the screw locations for a clean visual line. A 1-1/4 inch projection controls how far the handle stands off the cabinet face, so doors and drawers open with full finger clearance while staying close enough to avoid snagging on nearby traffic paths. The 11/16 inch width gives a comfortable grip area, which supports firm handling on heavier drawers. At each mounting point, the 5/16 inch base diameter sets a compact footprint, helping the pull sit neatly on narrow stiles or rails without overlapping edge details.

Using The Aspire Series Pull In Cabinet Projects

Where This Aspire Brushed Copper Pull Works

This Aspire Series pull, classified under decorative hardware handles and pulls, is suited to cabinet and drawer fronts that accept a 6-5/16 inch center to center layout, allowing it to serve across kitchen, bath, or built-in storage runs. The transitional style description means it pairs effectively with simple door designs, giving a consistent look from wall cabinets to base units. Its 6-1/2 inch length helps this pull visually anchor wider drawer faces, while still sitting comfortably on standard-width doors. The brushed copper finish can create a coordinated look when used across multiple rooms, tying together vanities, laundry cabinets, or office storage that share similar finishes.

Details That Support Consistent Hardware Results

The specified 6-5/16 inch (160 mm) center to center dimension allows installers to rely on metric or imperial boring patterns, which simplifies repeating the same layout across an entire job. The 1-1/4 inch projection is fixed, so once cabinets are bored, every installed pull sits at the same standoff, supporting uniform sightlines down a run of doors. With an 11/16 inch width, the gripping bar remains consistent from pull to pull, giving a uniform hand feel across drawers of different sizes. The 5/16 inch base diameter helps each mounting foot register predictably on the cabinet face, aiding alignment with door edges and neighboring hardware. The Berenson 2144-10BC-P part number links directly to this exact Aspire brushed copper configuration, which streamlines reorders or matching when adding new cabinets beside existing work.

Common Questions About Aspire Brushed Copper Pull

Selecting This Aspire Pull For Your Project

The Berenson Aspire brushed copper pull brings a 6-5/16 inch center to center layout, transitional style, and zinc construction together in one handle, so cabinets share a consistent look and feel. Its defined dimensions - from 6-1/2 inch length to 1-1/4 inch projection, 11/16 inch width, and 5/16 inch base diameter - give clear drilling and layout targets for efficient installation. For projects calling for the Aspire Series aesthetic in brushed copper, this 2144-10BC-P pull from Wurth Baer Supply offers a precise reference to match throughout new builds or expansions.