Berenson Aspire Series 3-3/4" (95 mm) Center to Center Brushed Copper Pull, - 2142-10BC-P

Berenson Aspire Brushed Copper Pull For Cabinets

Berenson Aspire brushed copper pull is a transitional cabinet handle that uses a 3-3/4 inch center to center mounting, so it lines up with common 96mm boring patterns on many doors and drawers. The pull is part of the Aspire collection, giving you a defined style reference when you are matching or extending existing hardware runs. Zinc material is used for the pull body, providing a solid metal construction that holds up under repeated opening and closing in kitchen, bath, or shop cabinetry. A brushed copper finish is applied to the surface, which softens reflections and helps fingerprints blend into the texture during everyday use. The overall length of about 4-1/8 inch gives you a little extra bar length beyond the mounting holes, creating clearance for fingers when grabbing from the side of a door or drawer front.

Key Aspire Series Pull Details For Projects

• The 3-3/4 inch center to center dimension matches a 96mm CC layout, helping installations where existing holes are already drilled and reducing layout work on replacements.
• The 1-1/4 inch projection sets how far the pull stands off the cabinet face, giving fingers room to grip without the hand dragging along the door or drawer surface.
• The 11/16 inch width defines the front face size of the pull, balancing a visible grip area with a slim profile that fits smaller drawer fronts or narrow rails.
• The 5/16 inch base diameter indicates the footprint where the pull meets the cabinet, creating a compact contact area that can sit comfortably on standard stile and rail widths.
• The brushed copper finish provides a warm metallic look with a subtle texture, helping the pull coordinate with other brushed copper hardware and soft lighting conditions.

Mounting Dimensions And Fit For Aspire Pull

The 3-3/4 inch center to center mounting dimension aligns with a 96mm CC standard, so hole spacing on many cabinets will accept this pull without re-boring. The 4-1/8 inch length gives you a clear sense of how far the pull runs across a drawer front, which matters when balancing hardware size against panel width. With a 1-1/4 inch projection, the pull stands off the face enough to allow a comfortable grip while limiting how far it extends into walkways or inside cabinet runs. The 11/16 inch width keeps the pull visually proportional on both narrow and wider fronts, helping you repeat the same part number across a full room of cabinets.

Using Berenson Aspire Pulls In Real Projects

Where This Berenson Aspire Cabinet Pull Fits

This pull is identified as part of the Aspire collection in the handles and pulls category, so it naturally fits projects that call for transitional style decorative hardware. The brushed copper finish works for cabinet runs where a warm metallic appearance is specified, letting the pull coordinate with other brushed copper items in the space. A 3-3/4 inch center to center layout fits common cabinet and drawer drilling patterns, so the same pull can often be used across base cabinets, wall cabinets, and multi-drawer stacks. Because the length is about 4-1/8 inch, the pull suits doors and drawers where you want a modest bar that does not dominate the front, which is useful on smaller bath vanities or upper cabinets. The zinc material construction places this pull within typical decorative hardware for woodworking applications, aligning with how shops and installers handle, store, and mount metal cabinet pulls.

Details That Support Consistent Mounting Results

The 3-3/4 inch (96mm) center to center measurement on this Aspire pull gives a precise drilling reference, which is important when setting up jigs or repeatable boring patterns in the shop. Using a known CC size allows installers to align multiple pulls in straight lines across banks of drawers without recalculating spacing. The 1-1/4 inch projection defines how much clearance is available between the pull and the cabinet surface, so hands can wrap comfortably around the pull while keeping contact away from painted or stained finishes. An 11/16 inch width presents a consistent grip surface, meaning the user feels the same bar thickness across every cabinet front where this part number is used. The 5/16 inch base diameter indicates a compact mounting footprint on the door or drawer face, which helps when positioning the pull on narrow rails where larger bases would crowd edges or panel details. The manufacturer part number 2142-10BC-P ties all of these dimensions and finish details to a single catalog reference, supporting repeat orders when adding cabinets or replacing hardware later.

Common Questions About This Aspire Cabinet Pull

Select This Aspire Pull For Matching Projects

The Berenson Aspire brushed copper pull combines a 3-3/4 inch center to center layout, about 4-1/8 inch length, and 1-1/4 inch projection to suit many cabinet door and drawer fronts. Using the 2142-10BC-P part number, order this zinc Aspire collection pull when your project calls for a transitional style handle in a brushed copper finish with consistent dimensions across multiple cabinets.