Berenson Aspire Series Pull For Cabinets

Berenson Aspire Series pull gives cabinets a transitional look by combining a modern brushed gold finish with a streamlined handle shape, so it works in projects that bridge traditional and contemporary styles. This pull is part of the Aspire collection from Berenson Corporation, which keeps hardware consistent across a job when matching pieces from the same series. The pull is made from zinc, giving a solid metal feel while keeping the weight manageable during layout and installation on multiple doors and drawers. Its 6-5/16 inch (160 mm) center to center dimension fits drilling patterns built around that common size, helping align replacement work or new layouts using the same spacing. An overall length of 6-1/2 inches creates a balanced look on standard cabinet faces, so the handle does not overpower narrow fronts yet still gives enough grab area.

Key Aspire 160mm Pull Details For Projects

• The 6-5/16 inch (160 mm) center to center measurement sets a fixed hole spacing, which supports accurate drilling and consistent alignment when installing multiple pulls in a run of cabinets.
• The modern brushed gold finish provides a muted metallic appearance, which helps the pull tie together brushed gold hinges or faucets in the same space without strong glare.
• The zinc material forms a rigid handle body, which supports everyday cabinet use while keeping machining and threading compatible with standard cabinet fastener practices.
• The 6-1/2 inch length works with the 160 mm hole spacing to keep end clearances minimal, which helps position the pull comfortably on doors and drawers without crowding the panel edges.
• The 1-1/4 inch projection establishes how far the pull stands off the cabinet face, which creates finger clearance for gripping while keeping the handle close enough to avoid catching on clothing.
• The 11/16 inch width gives the hand a defined contact surface, which aids comfort when opening heavier cabinet drawers or doors repeatedly throughout the day.

Cabinet Pull Fit, Mounting Size, And Layout

The Aspire pull uses a 6-5/16 inch (160 mm) center to center hole spacing, which defines the distance between mounting holes when laying out drilling templates or aligning to existing bores. This measurement matters when replacing older hardware that already has 160 mm spacing, because the new pull can reuse those holes without shifting the handle position. The pull length of 6-1/2 inches slightly exceeds the hole spacing, so there is some metal beyond each mounting point to visually frame the attachment area on the cabinet face. With a projection of 1-1/4 inches, the handle stands off enough to let fingers wrap behind the bar while keeping the profile relatively tight to the door. The base diameter of 5/16 inch and width of 11/16 inch define the footprint and front surface, which helps set expectations for how much flat mounting area is needed on the cabinet rail or stile.

Using This Modern Brushed Gold Pull In Work

Where The Berenson Aspire Series Pull Fits Best

This pull falls into the Handles and Pulls category within decorative hardware, placing it directly in typical cabinet, vanity, and furniture handle applications. The transitional style designation means it is suited to projects where the design language is neither strictly traditional nor fully modern, such as updated kitchens or mixed-material built-ins. Its modern brushed gold finish coordinates with other brushed gold elements specified on the same project, which can simplify finish schedules for installers standardizing around that tone. Being part of the Aspire collection gives designers and builders a way to repeat the same visual profile on doors and drawers across a room, supporting a consistent line of sight on upper and lower cabinets. The zinc construction supports these uses by giving a metal base that integrates with common woodworking fastener practices on cabinet faces.

Details That Support Repeatable Cabinet Installations

The 6-5/16 inch (160 mm) center to center dimension is a key reference when fabricating drilling jigs or using line-boring equipment, because the constant spacing allows installers to run the same pattern across many fronts without recalculating layout. Using the specified 8-32 x 1 inch screw size ties the pull to a standard cabinet fastener thread, which streamlines installation where 8-32 tapping or pre-threaded inserts are already part of the shop process. The 1-1/4 inch projection and 11/16 inch width give predictable ergonomics, meaning the installer can position the pull at consistent heights and still expect a comfortable hand clearance on doors and drawers. The 5/16 inch base diameter defines a compact contact point with the door or drawer face, allowing mounting on narrower rails or stiles where wider bases might crowd decorative edge profiles. Together, these defined dimensions support repeatable installations with matching reveals and hardware alignment on multi-cabinet runs.

Common Questions About The Aspire 160mm Pull

Selecting This Pull For 160mm Cabinet Layouts

The Berenson Aspire Series pull with 6-5/16 inch (160 mm) center to center sizing, zinc construction, and modern brushed gold finish gives a defined hardware choice for cabinets built around that spacing. Its transitional style and coordinated Aspire collection identity support visually consistent runs of doors and drawers. For projects calling for modern brushed gold with a measured projection and known width, this pull offers clear, repeatable dimensions that align with standard cabinet drilling patterns and 8-32 x 1 inch screw use. Choosing this model sets a fixed reference for hardware positioning across current and future work that stays within the same 160 mm layout.