Berenson Aspire Series Brushed Tin 18" (457 mm) Center to Center Appliance Pull, -2149-10BT-P

Berenson Aspire Appliance Pull For Large Fronts

Berenson Aspire appliance pull gives you an 18 inch center to center grip for appliance or oversized cabinet fronts, so you get a long, consistent handhold across wider doors and panels. This pull is part of the Aspire collection in a transitional style, which supports projects that need to bridge traditional and contemporary cabinet designs. The brushed tin finish provides a muted metallic look, helping hardware blend with a range of door colors and nearby metal finishes. Zinc construction gives the pull a solid feel and stable weight in daily use. An overall length of 18-3/8 inches adds slight overhang beyond the mounting centers, which visually anchors the front and balances larger face areas. A projection of 1-13/16 inches brings the handle far enough off the surface for a comfortable grasp.

Key Aspire Appliance Pull Details For Projects

• The 18 inch center to center dimension sets the exact mounting hole spread, which allows precise drilling for new work or consistent layout when replacing an existing pull of the same size.
• An overall length of 18-3/8 inches creates a small margin beyond the hole centers, which frames the door or panel face and supports a proportional look on tall or wide fronts.
• A projection of 1-13/16 inches establishes the stand-off from the surface, giving fingers room behind the pull and helping users grasp it comfortably when opening heavier doors.
• The base diameter of 1/2 inch defines the footprint at each mounting point, which helps you evaluate how the ends sit on the stile or rail and how much surface they visually cover.
• A width of 1-1/32 inches sets the front-to-back face dimension, providing a hand contact area that feels substantial during use without overwhelming standard cabinet and appliance facings.
• The brushed tin finish gives a softened metallic appearance, which helps the pull coordinate with nearby fixtures that use similar toned finishes in kitchens or other work areas.

Mounting Dimensions That Guide Hole Layout

The 18 inch center to center measurement on this Berenson Aspire appliance pull defines the spacing between mounting points, which guides hole layout on new cabinet or appliance fronts. Its 1/2 inch base diameter identifies how much flat surface is needed around each hole, helping with placement on narrow rails. The 1-13/16 inch projection tells you how far the handle sits off the face, which influences clearance around adjacent trim or neighboring doors. A width of 1-1/32 inches determines the visible band of metal across the front, so you can align the pull visually with door styles, edge profiles, or appliance panel proportions.

Using This Aspire Series Pull In Real Projects

Where This Aspire Series Cabinet Pull Fits Best

This Berenson Aspire appliance pull is categorized as an appliance pull, aligning it with doors and panels that benefit from a longer grip across the face. The 18 inch center to center size suits tall pantry doors, integrated appliance fronts, or oversized cabinet openings where smaller pulls would look undersized. Its transitional style supports projects that combine framed or paneled doors with more streamlined elements, helping hardware tie mixed design elements together. The brushed tin finish works where a subdued metallic tone is needed near other brushed metals, so the pull can visually connect with nearby hinges, faucets, or fixtures that share a similar color family. Zinc material places this pull in the family of decorative cabinet hardware commonly used in woodworking projects.

Why These Dimensions Support Repeatable Installs

The consistent 18 inch center to center measurement on the Aspire series cabinet pull allows you to use a single drilling pattern across multiple fronts, which supports repeatable layouts on a run of tall doors or appliance panels. An overall length of 18-3/8 inches means the ends extend slightly beyond the hole centers, giving a predictable overhang that can be mirrored across doors for a uniform visual line. The 1/2 inch base diameter creates a defined circular contact area at each end, which helps position the pull on rails or stiles without crowding edges. With a 1-13/16 inch projection, the pull stands off far enough to clear typical door styles and finger space, helping users get a solid grip on heavier or taller fronts. The 1-1/32 inch width repeats along the length, so each installation presents the same face dimension, supporting consistent appearance across banks of doors or several appliance panels in one project.

Common Questions About This Aspire Appliance Pull

Select This Aspire Pull For Matching Fronts

The Berenson Aspire appliance pull in brushed tin combines an 18 inch center to center layout with transitional styling, aligning it with tall cabinet and appliance fronts that need a longer grip. Zinc construction and a 1-13/16 inch projection provide a solid feel with comfortable clearance. Precise dimensions for length, width, and base diameter support consistent drilling and alignment across multiple doors or panels. For projects using Aspire collection hardware or brushed tin finishes, this pull gives a defined, repeatable option for larger fronts.