Berenson Aspire Series 5-1/16" (128 mm) Center to Center Brushed Copper Pull, - 2143-10BC-P

Berenson Aspire Brushed Copper Pull For Cabinets

Berenson Aspire brushed copper pull gives cabinets a transitional style using a zinc construction with a brushed copper finish, which suits projects calling for metal hardware with a warm look that still reads as clearly defined. The pull has a 5-1/16 inch (128 mm) center to center drilling, so the mounting holes align with common cabinet boring patterns for straightforward handle changes. Overall length is 5-7/16 inch, providing visual coverage beyond the drilling span to balance drawer and door fronts. Projection is 1-1/4 inch, which creates hand clearance for a comfortable grip while opening doors or drawers. Width is 11/16 inch, giving enough finger contact area without crowding adjacent hardware. A base diameter of 5/16 inch defines the footprint at each contact point, which helps mark out drilling locations and keeps the pull looking proportional on standard cabinet faces.

Key Aspire Pull Details That Help Your Work

• The Aspire pull comes from the Berenson Aspire collection in a transitional style, so it fits projects that bridge traditional and contemporary cabinet designs while keeping hardware lines simple for consistent visual runs.
• Material is zinc, which provides a metal body suitable for decorative cabinet hardware, helping the pull feel solid in hand during repeated use on doors and drawers in everyday environments.
• The brushed copper finish adds a subdued metallic tone, which supports designs where hardware should stand out from the cabinet surface but still coordinate with other warm metal fixtures in the same room.
• The 5-1/16 inch (128 mm) center to center dimension matches a widely used mounting size, allowing direct swaps on cabinets already drilled at this spacing and supporting consistent alignment across multiple fronts.
• The 5-7/16 inch overall length offers slight overhang beyond the screw holes, which helps visually center the pull on wider faces and maintain a balanced look from piece to piece.
• A 1-1/4 inch projection keeps the handle standing off the cabinet enough for fingers to wrap behind, which reduces knuckle contact with the door surface during operation.
• The 11/16 inch width and 5/16 inch base diameter define the front profile and contact points, which helps plan hardware layouts where spacing between adjacent pulls needs to stay even.

Mounting And Sizing Details For Aspire Pull

This Aspire pull from Berenson Corporation uses a 5-1/16 inch center to center mounting dimension, so drilling is set for that exact hole spacing when laying out new cabinet fronts or aligning replacements. The pull length of 5-7/16 inch leaves modest extension beyond the mounting points, helping it sit comfortably on both standard doors and medium-width drawers without feeling undersized. A projection of 1-1/4 inch determines how far the grip stands off the face, which keeps fingers away from finished surfaces as the pull is used. The width of 11/16 inch defines the graspable section, offering a narrow but usable bar that suits many residential cabinet runs. With a base diameter of 5/16 inch, the contact area at each end supports clean seating against the cabinet face.

Using The Berenson Aspire Pull On Projects

Where This Aspire Brushed Copper Pull Fits Best

The Aspire pull sits in Berenson's decorative hardware class as a handle and pull, so it is suited to cabinet and drawer applications where metal pulls set the visual tone. Its transitional style means it works in layouts that mix straight cabinet lines with softer surrounding finishes, helping unify different door profiles. The brushed copper finish adds a muted metal color, which can tie together copper-toned fixtures and wood cabinetry without high-gloss reflection. Because the center to center dimension is 5-1/16 inch (128 mm), this pull fits projects using that drilling standard across doors and drawers, simplifying layout decisions on multi-cabinet runs. The 5-7/16 inch length allows it to sit well on standard kitchen, bath, or utility cabinets that use similar handle spans.

Why Aspire Dimensions Support Consistent Results

The specific 5-1/16 inch (128 mm) center to center measurement provides a repeatable drilling target, which keeps hardware lines straight when the same spacing is used from cabinet to cabinet. Projection of 1-1/4 inch maintains a consistent standoff distance, so fingers experience similar clearance across every door and drawer fitted with this part. The 11/16 inch width and 5/16 inch base diameter dictate the visible bar size and end points, giving installers fixed reference dimensions when calculating clearances to adjacent pulls or wall edges. Zinc construction offers a defined weight and feel, so each installed handle behaves the same way during opening and closing. With the 2143-10BC-P part number, the brushed copper Aspire pull can be specified and reordered consistently across multiple jobs.

Common Questions About The Aspire 128mm Pull

Selecting This Aspire Pull For Cabinet Runs

The Aspire pull in brushed copper from Berenson Corporation combines zinc construction, a 5-1/16 inch (128 mm) center to center, and transitional styling to support coordinated cabinet hardware runs. Using its defined length, projection, and width, projects can align doors and drawers around a single, repeatable handle size. For cabinet work needing a brushed copper look with clear drilling dimensions, this 2143-10BC-P pull from Wurth Baer Supply offers a specific option to specify on drawings and material lists.