Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Aspire cabinet pull 128mm is a transitional style zinc pull in a matte black finish, so it bridges traditional and modern cabinet layouts while keeping a consistent dark tone across the run. The 5-1/16 inch (128 mm) center to center drilling gives a standard spread that works well across multiple cabinet widths, which helps keep layout straightforward on both doors and drawers. Overall length of 5-7/16 inches provides enough hand clearance for a solid grip, which supports day-to-day use on frequently opened fronts. A projection of 1-1/4 inches spaces the hand away from the cabinet face, reducing knuckle contact against the door or drawer front during operation. The 11/16 inch width gives the pull a balanced look on face frames or frameless fronts, which helps finishes line up cleanly with other decorative hardware in the same area.
The Aspire pull uses a 5-1/16 inch (128 mm) center to center measurement, so installers can lay out mounting holes on that fixed spread when drilling new fronts or replacing hardware with the same drilling dimension. The pull is designed for use with 8-32 x 1 inch screws, giving a known thread and length target when working with typical cabinet door and drawer front thicknesses. A base diameter of 5/16 inch at each foot defines the footprint where the pull meets the surface, which helps with marking, pilot drilling, and checking that each base sits flat on the finished face. With a projection of 1-1/4 inches and a width of 11/16 inch, the handle stands off the door enough for fingers to wrap behind the bar, supporting comfortable operation without requiring deeper standoffs.
This Berenson Aspire Series 2137-1055-P pull is part of the Aspire collection, so it suits cabinet runs built around that coordinated style in kitchens, baths, and other casework. The transitional design lets it work on both framed and frameless cabinets where clean lines are preferred without moving to an ultra-modern look, supporting remodels that blend existing fronts with new sections. Matte black finish on the zinc body creates a uniform, dark hardware line across doors and drawers, which can visually ground light-colored cabinet faces or tie into other black elements in the room. The 5-1/16 inch (128 mm) center to center dimension defines its role in layouts that specify metric drilling while still reading as a familiar mid-length pull on North American cabinetry.
The 5-7/16 inch overall length and 5-1/16 inch (128 mm) center to center spread work together to keep end overhangs even beyond the mounting points, which helps installers maintain consistent sightlines on banks of drawers. A projection of 1-1/4 inches creates enough stand-off for fingers to pull straight without scraping the door or drawer, supporting smoother operation over time. The 11/16 inch width gives the bar a stable feel when grasped, which can be helpful on heavier drawers that see regular use. With a base diameter of 5/16 inch at each foot, the contact area is clearly defined, supporting accurate placement on layout marks and reducing the chance of the pull sitting off-line against the finished surface. Thread specification of 8-32 on the screws ties the pull into a standard fastener size, which fits common cabinet construction practices when selecting appropriate mounting length.
The Berenson Aspire pull has a 5-1/16 inch (128 mm) center to center dimension, which sets the required drilling spread between the two mounting holes.
The Berenson 2137-1055-P pull has a 5-7/16 inch overall length, giving slight bar extension past the mounting points for visual balance on cabinet fronts.
The Aspire matte black cabinet pull projects 1-1/4 inches from the cabinet face, creating space for fingers to wrap behind the handle during normal use.
This Aspire pull is made from zinc with a matte black finish, providing a solid-feeling handle with a low-sheen dark appearance on cabinet faces.
The pull has an 11/16 inch width and a 5/16 inch base diameter, defining the bar thickness and the contact footprint against the cabinet surface.
The Berenson Aspire 2137-1055-P pull is specified for 8-32 x 1 inch screws, aligning with a common cabinet hardware thread size and length.
The Berenson Aspire Series 5-1/16 inch (128 mm) center to center matte black pull combines a transitional profile, zinc construction, and a defined 5-7/16 inch length to support consistent cabinet runs. The 1-1/4 inch projection, 11/16 inch width, and 5/16 inch base diameter work together to provide comfortable grip and clean alignment on doors and drawers. With a specified 8-32 x 1 inch screw size, this pull matches standard cabinet hardware practice, which helps align it with typical shop and jobsite workflows when selecting handles for new installations or upgrades.
Sold In: 1 Each
