Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Aspire cabinet pull 128mm is a zinc handle in the Aspire collection with a brushed nickel finish, so it gives cabinetry a consistent modern look using a defined product family. The 5-1/16 inch (128 mm) center to center dimension sets hole spacing, which matters when drilling new fronts or aligning with existing bores. The pull length of 5-7/16 inches provides hand clearance along the drawer or door edge, which helps with a steady grip during regular use. A projection of 1-1/4 inches sets the stand-off from the surface, so fingers have space between the hardware and the cabinet face. The 11/16 inch width shapes the feel of the pull under load, which supports predictable handling when opening heavier drawers. A base diameter of 5/16 inch defines the footprint at each contact point, which helps guide layout marks when lining up multiple pulls across a run.
The 5-1/16 inch (128 mm) center to center dimension defines the screw hole spacing, so installers can lay out drilling templates or reuse existing holes on cabinet doors and drawers. The 8-32 x 1 inch screw size is specified for mounting, which identifies the thread and length needed to secure the zinc pull through typical cabinet fronts. The 5-7/16 inch overall length helps with visual centering on drawer and door faces, which supports consistent alignment from piece to piece in a job. A 1-1/4 inch projection sets how far the brushed nickel pull stands proud of the cabinet surface, which affects both grip comfort and clearance against adjacent faces. The 11/16 inch width and 5/16 inch base diameter define the contact and grip profile, which assists during layout when matching multiple pulls along a bank of cabinets.
This pull is part of the Aspire collection, so it suits projects that call for coordinated decorative hardware across multiple doors and drawers. The brushed nickel finish matches other brushed nickel elements, which supports consistent visual lines in kitchens, baths, and built-ins using similar metal tones. The 5-1/16 inch (128 mm) center to center dimension places it in a common cabinet pull size, which fits layouts designed around that spacing on many fronts. With a 5-7/16 inch length, the pull sits comfortably on standard drawer widths, which keeps proportions balanced while still leaving room near edges and trim. The zinc material provides a metal structure, which works well on frequently operated cabinet components where a firm grip is needed. The 1-1/4 inch projection and 11/16 inch width also make this handle suited to regular daily use where hand clearance and grip surface are important.
The 5-1/16 inch (128 mm) center to center layout simplifies repetition, because installers can use the same drilling pattern for each cabinet face built around that spacing. The 5-7/16 inch length gives a clear reference when measuring from edges, which speeds marking centerlines and keeps pulls aligned across stacked drawers. A 1-1/4 inch projection standardizes stand-off, which helps maintain a straight visual plane of hardware handles along a run of cabinets. The 11/16 inch width and 5/16 inch base diameter give predictable edge distances, which aids in setting consistent reveal from door and drawer edges during installation. The brushed nickel finish minimizes visual distraction from minor handling marks during fitting, which supports a clean appearance after final wipe-down. With zinc construction and a defined Aspire collection identity, this pull helps keep hardware selection uniform from planning through final install.
The Berenson Aspire cabinet pull 128mm has a 5-1/16 inch (128 mm) center to center measurement, which sets exact hole spacing for drilling and for swapping onto existing cabinet fronts.
The pull length is 5-7/16 inches, which defines how much door or drawer front it spans and helps with centering and clearances near edges and neighboring hardware.
The pull is made from zinc with a brushed nickel finish, which gives a metal feel in hand while coordinating with other brushed nickel cabinet hardware in the same space.
The projection is 1-1/4 inches, which defines how far the handle stands off the surface and affects the finger clearance available when gripping the pull.
The specified screw size is 8-32 x 1 inch, which sets the thread and length needed to fasten the pull through typical cabinet doors and drawer fronts.
The pull has an 11/16 inch width and a 5/16 inch base diameter, which together determine the gripping surface and contact footprint on the cabinet face.
The Berenson Aspire cabinet pull 128mm combines a 5-1/16 inch (128 mm) center to center spacing with a 5-7/16 inch length, giving a defined pattern for cabinet hardware layouts. With zinc construction, a brushed nickel finish, and a 1-1/4 inch projection, the pull matches projects planned around these specific dimensions. Selecting this 9234-1BPN-P model lets installers and serious DIY users work from consistent measurements across multiple cabinet doors and drawers on the job.
Sold In: 1 Each
