Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Aspire appliance pull is a zinc appliance pull in a transitional style that provides a balanced look on appliance panels and large cabinet doors. The brushed copper finish delivers a warm metallic appearance that coordinates with other copper-toned decorative hardware on the same run. The 12 inch center to center dimension sets a wide hand grip that suits taller panels and wider appliance fronts in busy kitchen layouts. Overall length of 12-7/16 inch gives slight overhang beyond the drill points so the pull visually anchors large faces. A projection of 1-13/16 inch creates stand-off from the door surface, allowing clearance for fingers during repeated opening and closing. The 1 inch width offers a substantial feel without crowding adjacent hardware lines on the cabinet face. A base diameter of 7/16 inch defines a compact footprint at each mounting point on the panel.
The 12 inch center to center measurement sets precise drill locations for mounting, helping installers align pulls consistently across multiple doors and appliance panels. Using the 10-24 x 1 inch screw size defines the hole diameter and thread engagement through the panel, which streamlines tool selection and drilling workflow on site. A projection of 1-13/16 inch influences setback from panel edges, so the installed pull provides enough hand clearance without protruding excessively in narrow traffic paths. The 1 inch width and 7/16 inch base diameter guide layout near panel edges, keeping the pull comfortably clear of adjacent trim or door reveals. The overall length of 12-7/16 inch supports centered positioning on wider faces, simplifying measurements when aligning with neighboring hardware.
The Aspire brushed copper pull, with its transitional style, suits kitchens that combine contemporary cabinet lines with warmer metal finishes on hardware. The 12 inch center to center spread works well on appliance panels and oversized cabinet doors where smaller pulls might look underscaled. Its 12-7/16 inch overall length helps visually balance tall panels, giving the hardware enough presence to match wider door faces. The 1 inch width and 1-13/16 inch projection support use on refrigerator, freezer, or tall pantry fronts where users often grip from the side as well as the front. The brushed copper finish coordinates with other copper-toned decorative hardware and moldings in the space, supporting consistent hardware runs on cabinets near appliances.
The defined 12 inch center to center dimension allows installers to reuse drilling templates across multiple doors, improving repeatability on large kitchen projects. The 10-24 x 1 inch screw size standardizes fastener threading through appliance panels or thick cabinet doors, which helps maintain consistent pull tension after tightening. A projection of 1-13/16 inch sets predictable clearance from the door face, so layouts along tall banks of fronts align visually when viewed down the run. The 7/16 inch base diameter keeps each mounting point compact, supporting accurate placement near panel edges without crowding neighboring design elements. Zinc construction delivers a uniform body that pairs with the brushed copper finish, so each pull presents the same profile across all installed locations. Together, these defined measurements and finish characteristics support clean, repeatable installations on both new builds and remodel projects using the Berenson Aspire appliance pull.
The Berenson Aspire appliance pull has a 12 inch center to center distance, which sets the drilling points for consistent alignment across doors and appliance panels.
The Berenson Aspire 2145-10BC-P appliance pull has an overall length of 12-7/16 inch, giving slight overhang beyond the 12 inch mounting centers on the panel face.
The Aspire brushed copper pull is made from zinc, providing a solid metal body suitable for frequent use on appliance and cabinet fronts.
The Berenson Aspire appliance pull projects 1-13/16 inch from the mounting surface, creating finger clearance between the pull and the door face.
The Aspire zinc brushed copper appliance pull uses 10-24 x 1 inch screws, which set the thread type and installed reach through the panel or door.
The Aspire transitional appliance pull has a 1 inch width, offering a substantial grip area suited to heavier appliance doors and tall cabinet fronts.
The Berenson Aspire appliance pull in brushed copper combines a 12 inch center to center layout with a 12-7/16 inch overall length, giving strong visual balance on appliance panels and tall cabinet doors. Its zinc construction, 1 inch width, and 1-13/16 inch projection provide a solid, comfortable grip sized for heavier fronts. With a transitional style and brushed copper finish, this pull aligns decorative hardware runs across mixed-design kitchens. Selecting this model by its 2145-10BC-P part number supports consistent specification on projects using Aspire Series appliance pulls.
Sold In: 1 Each
