Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Stylus recess pull from Berenson Corporation is a zinc die cast cabinet pull with a brushed nickel finish, so it provides a recessed gripping point with a contemporary metal look that suits modern cabinet and furniture projects. The pull has a length of 2-1/2 inches, giving a compact square footprint that fits small door and drawer faces where space is tight. A bore diameter of 60 mm and 11 mm depth means the pull sits into a routed pocket, creating a low-profile face that helps doors slide past adjacent surfaces. The base diameter of 2-3/8 inches defines the visible trim, which helps cover the routed edge for a neat finished appearance. A projection of 1/2 inch keeps the pull shallow off the surface, which limits snag points in tight walkways and built-ins while still allowing practical finger access.
The Stylus recess pull uses a 60 mm bore diameter, so installers can size hole saws or routing jigs around that fixed circular measurement for accurate cavity cuts. An 11 mm depth for the bore defines how deep to route into the panel, which helps maintain material thickness on standard cabinet doors and drawer fronts while allowing the body of the pull to sit flush. The 2-3/8 inch base diameter then overlaps the bore edge, which hides minor imperfections at the cut and gives a clean reveal around the pull. With a 2-1/2 inch overall length and matching 2-1/2 inch width, the pull forms a square footprint that simplifies layout grids and spacing on face frames or slab fronts.
This Stylus recess pull is part of the Stylus Series and falls under Berenson handles and pulls, so it is built for decorative hardware use on cabinet doors and drawer fronts. The zinc die cast construction means the pull is a solid metal component, which suits residential or light commercial cabinetry where a rigid feel is preferred over lightweight trim pieces. The brushed nickel finish gives a neutral, contemporary look that blends with many laminate, painted, or wood surfaces, so installers can use one pull style across mixed-material projects. Because the length and width are both 2-1/2 inches, the pull presents a compact square shape, which works well on narrow drawer fronts, small vanity doors, or built-in furniture where full-length handles would crowd the design. A projection of 1/2 inch keeps the functional grip close to the door surface, which is useful on passage areas, closet systems, or workstations where minimal protrusion helps avoid catching clothing or equipment.
The 60 mm bore diameter on this Stylus recess pull gives a precise circular target for routing, which supports template-based production where multiple doors or drawers need identical recesses. An 11 mm bore depth sets a consistent cavity, which helps ensure the pull body sits properly without over-cutting the panel and weakening the back side. The 2-3/8 inch base diameter slightly undersizes the 2-1/2 inch length and width dimension, which creates a defined trim ring that neatly frames the routed opening on the cabinet face. With a width of 2-1/2 inches matching the length, installers can rotate the pull without changing layout, simplifying orientation decisions during mounting. The 1/2 inch projection then controls how far the grip stands off from the recessed pocket, balancing a low profile with access for fingertips when operating heavier drawers or doors.
The Stylus recess pull is made from zinc die cast material, which gives a solid metal body suited to regular cabinet and drawer operation.
The 60 mm bore diameter sets the required recess size, letting installers match router bits or hole saws for consistent, repeatable pull cavities.
The 11 mm bore depth controls how deep the recess is cut, helping retain strength in typical door or drawer panels while housing the pull.
The brushed nickel finish provides a muted metallic appearance that coordinates with other brushed nickel cabinet hardware and fixtures.
The 1/2 inch projection keeps the pull low profile, which reduces snag points while still allowing enough grip to operate doors and drawers.
The 2-1/2 inch length and width create a compact square pull that suits smaller doors, narrow drawers, and tight grid layouts on modern cabinetry.
The Stylus recess pull from Berenson Corporation offers a 60 mm bore diameter, 11 mm depth, and 2-1/2 inch square size, giving installers fixed dimensions that support template-based routing and consistent spacing. The zinc die cast construction and brushed nickel finish provide a solid metal feel and coordinated appearance across cabinets, vanities, and built-in storage. By matching bore size, depth, and low 1/2 inch projection to the project requirements, this pull helps deliver clean recessed hardware lines on doors and drawers while maintaining smooth operation.
Sold In: 1 Each
