Stylus Series, Zinc Die Cast Recess Pulls 64 mm Bore Dia., Dull Chrome Finish

Stylus Recess Pull 64x64mm Dull Chrome Use

Stylus recess pull 64x64mm dull chrome identifies this Berenson Corporation Stylus Series zinc die cast recess pull, so installers know they are working with a defined 64 mm bore diameter layout for consistent cabinet or panel machining. The dull chrome finish provides a muted metallic look, which helps this pull blend into modern casework where reflective glare is unwelcome. The 64 mm bore diameter paired with an 11 mm depth defines the recess cup size, guiding hole boring depth for a snug, rattle-free fit in wood or composite fronts. A 2-1/2 inch overall length and matching 2-1/2 inch width create a square footprint, which simplifies routing templates and visual alignment on doors and drawers. The Stylus collection identity ties this pull into the broader Berenson decorative hardware family for cohesive hardware selection on multi-opening projects.

Key Stylus Pull Details For Job Planning

• The zinc die cast material gives this pull a solid, molded body, which supports repeatable machining expectations compared to mixed-material fittings on cabinet runs.
• The dull chrome finish defines the surface color and sheen, helping installers coordinate with other dull chrome hardware on doors, drawers, and surrounding decorative hardware.
• The 64 mm bore diameter dimension establishes the hole size for the recess, so boring tools or bits can be selected around that fixed interface for clean, accurate cups.
• The 11 mm depth specification tells how deep the recess must be cut, which helps prevent blow-through on thinner fronts and keeps the pull sitting flush in the pocket.
• The 2-1/2 inch length and width specify the outer footprint, giving a clear reference for layout, spacing from edges, and interference checks with neighboring hardware.
• The 1/2 inch projection value indicates how far the pull stands out from the mounting surface, which affects finger clearance and overall door and drawer front profile.

Mounting And Fit Details For Stylus Pull

The 64 mm bore diameter on this Stylus Series recess pull sets the primary mounting interface, so boring a 64 mm cup provides the proper side clearance around the zinc die cast body. With an 11 mm depth, the recess pocket is shallow enough for most standard cabinet and drawer fronts, while still giving the pull enough engagement in the material to feel secure in use. The 2-1/2 inch length and 2-1/2 inch width define a square outer profile, helping installers square the pull to door and drawer edges without complex measurements. A 1/2 inch projection lists how far the front of the pull sits above the face, affecting how fingers grab the pull and how the hardware lines up with adjacent fronts.

Using This Berenson Stylus Recess Pull On Projects

Where This Zinc Die Cast Stylus Pull Fits Best

This Stylus Series zinc die cast recess pull from Berenson Corporation is designed for applications that call for a 64 mm bore diameter recess in cabinet or furniture fronts. The square 2-1/2 inch by 2-1/2 inch base dimensions lend themselves to modern, geometric layouts on doors, drawers, or sliding panels where straight sightlines matter. An 11 mm recess depth allows this pull to seat into the material while leaving a defined 1/2 inch projection, so the pull reads as mostly flush with a slight stand-off for grip. The dull chrome finish cues a subdued metallic tone that works with dull chrome decorative hardware and moldings, keeping visual consistency across a room of coordinated fittings.

Why These Stylus Dimensions Support Consistent Results

The fixed 64 mm bore diameter of this recess pull lets installers standardize a single boring setup across multiple fronts, minimizing layout variation and rework on repetitive cabinet runs. Its 11 mm depth gives a concrete drilling target, helping maintain front thickness behind the cup while still allowing the zinc die cast body to seat evenly. Because the base measures 2-3/8 inch while the overall length and width are 2-1/2 inch, installers have clear outer and inner dimension references to align routing or boring jigs. The 1/2 inch projection sets how far the functional face extends from the front surface, which influences hand clearance and alignment with neighboring pulls or adjacent trim. The Berenson Stylus naming and manufacturer part number 9326-10DC-C provide a consistent identifier, so the same recess pull style can be ordered again on future phases of the same project.

Common Stylus Recess Pull 64x64mm Questions

Select This Stylus Recess Pull For 64mm Bores

The Stylus Series zinc die cast recess pull in dull chrome from Berenson Corporation combines a defined 64 mm bore diameter, 11 mm depth, and 2-1/2 inch square footprint, giving installers clear targets for boring and layout. With a 1/2 inch projection and Stylus collection styling, it supports modern cabinet, furniture, and panel projects that follow a consistent dull chrome hardware theme. Use the manufacturer part number 9326-10DC-C through Wurth Baer Supply when a matching Stylus recess pull is required across multiple openings.