Stylus Series, Zinc Die Cast Recess Pulls 1-7/8" Bore Dia., Brushed Nickel Finish

Stylus Recess Pull 50x50mm For Clean Cabinet Access

Stylus recess pull 50x50mm identifies this Berenson Corporation pull as part of the Stylus Series, so it delivers a consistent look wherever that collection is specified. The zinc die cast material forms a solid recess pull body, which supports a stable hand grip in everyday cabinet use. A brushed nickel finish covers the pull, giving the face a muted metallic appearance that works well on many cabinet surfaces. The pull is designed with a 1-7/8 inch length, so it suits compact door and drawer layouts where space is tight. Its 1-7/8 inch width matches the length, creating a square footprint that makes layout and routing patterns straightforward. An 11mm depth on the 1-7/8 inch bore diameter defines how deep the recess needs to be, which helps plan milling passes on doors and drawer fronts.

Stylus Series Details That Support Daily Use

• The zinc die cast construction creates a rigid pull body, which helps the recess maintain its shape under frequent gripping on doors and drawers.
• The brushed nickel finish provides a subdued metallic appearance, which lets the pull coordinate with other brushed nickel cabinet hardware on the same project.
• The 1-7/8 inch length gives a compact grip span, which fits small fronts while still leaving enough edge distance for solid material around the recess.
• The 1-7/8 inch width matches the length for a square profile, which simplifies creating a matching pocket and aligning the pull with cabinet lines.
• The 1-7/8 inch bore diameter by 11mm depth recess dimension defines the pocket size, which guides boring or routing setups for repeatable installations.
• The 1/2 inch projection defines how far the pull stands proud, which affects how fingers catch the edge and how much the pull interrupts adjacent fronts.

Recess Pull Fit, Bore Layout, And Mounting Geometry

The 1-7/8 inch bore diameter sets the main cutout size, giving a clear target for boring or routing jigs on cabinet fronts. An 11mm depth on that bore limits how deep the pocket is formed, which helps preserve material thickness behind the pull area. The 1-3/4 inch base dimensions define the footprint that actually rests against the surface, so the pull seats inside the recess with a defined border around the opening. A 1/2 inch projection describes how far the functional grip stands off the surface, which affects both clearance for fingers and how the pull relates to neighboring doors or drawers. The 1-7/8 inch overall length and width work together with these dimensions, so layouts stay consistent across banks of cabinets.

Where This Brushed Nickel Stylus Pull Fits Best

Stylus Series Pull For Cabinet And Drawer Fronts

The Stylus Series identification connects this recess pull to other Berenson Corporation decorative hardware, which helps keep cabinet and drawer fronts visually consistent across a room. Its 1-7/8 inch length and width suit smaller doors, vanity fronts, or compact drawers, where a larger pull might crowd edges or panel details. The 1-3/4 inch base dimensions allow a small reveal around the bore, which frames the recess neatly on flat or slab-style fronts. With a brushed nickel finish, the pull coordinates with brushed nickel hinges or other trim in the space, helping hardware elements read as a single planned set. The zinc die cast material supports these applications by providing a firm recess contour that withstands routine operation in kitchens, offices, or shop cabinets.

Dimensional Details That Support Consistent Results

The 1-7/8 inch bore diameter by 11mm depth gives clear numbers for tooling, which helps repeat the same pocket size on multiple fronts without trial cuts. Matching 1-7/8 inch length and width create a square plan, so jigs can reference a single dimension when laying out rows of pulls. The 1-3/4 inch base dimensions keep the seating surface slightly smaller than the recess, which helps the pull nest cleanly while leaving a consistent edge margin. A 1/2 inch projection defines how far the functional edge sits from the face, which helps maintain a uniform reveal between adjacent doors and drawers in tight banks. When combined with the brushed nickel finish, these measurements bring both alignment and appearance into one predictable setup across repeated installations.

Common Questions About The Stylus Recess Pull 50x50mm

Select This Stylus Recess Pull For Defined Layouts

The Stylus Series zinc die cast recess pull from Berenson Corporation combines a 1-7/8 inch length and width with a 1-7/8 inch bore diameter by 11mm depth, so the layout and recess geometry are clearly specified. A 1-3/4 inch base and 1/2 inch projection round out the footprint, giving you fixed dimensions for routing and alignment on cabinet or drawer fronts. With its brushed nickel finish tied to part number 9327-1BPN-C, this pull offers a defined choice when a compact, square brushed nickel recess pull is needed on a project.