Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Stylus recess pull 39x39mm dull chrome describes a Berenson Stylus Series zinc die cast recess pull designed as a compact, modern gripping point on cabinet and furniture fronts, so installers can create a clean, flush look instead of using protruding handles. The 39x39mm size, described as 1-1/2 inch length and width, keeps the pull small enough for tight cabinet layouts while still giving a defined finger pocket for opening doors or drawers. The dull chrome finish provides a muted metallic appearance rather than a mirror shine, which helps this pull visually blend into contemporary or commercial cabinetry where low-glare hardware is preferred. Being part of the Stylus Collection ties this pull to a coordinated hardware family, allowing projects to maintain a consistent style across multiple cabinet locations.
The 1-1/2 inch bore diameter on this Berenson Stylus recess pull defines the hole size required, so shop crews can run a standard boring operation and know the pull will seat accurately within the round cutout. The specified 11mm depth tells fabricators how much material must be cleared behind the face, which helps avoid breaking through thinner panels or crowding interior components such as drawer boxes. With overall length and width at 1-1/2 inch, the 39x39mm footprint fits comfortably on typical cabinet rails and drawer fronts, supporting layouts that repeat the same boring pattern across a run of cabinets. The 1/2 inch projection from the face provides a shallow, consistent grip point that reduces snag risk in traffic areas while still giving enough edge for fingers to catch the pull.
The Stylus Series zinc die cast recess pull, with its 1-1/2 inch by 1-1/2 inch footprint, suits cabinet and furniture fronts that benefit from a small, square pull, so designers can keep rails and stiles visually light while still marking an obvious touch point. Its dull chrome finish serves projects aiming for a subtle metal accent, allowing this pull to sit comfortably on painted, laminated, or wood-veneer fronts without creating bright hotspots across a bank of doors. Because the bore diameter is also 1-1/2 inch, the pull aligns naturally with common boring tools in cabinet shops, supporting repeatable machining on door and drawer fronts in production runs. The 11mm depth lets this recess pull sit into the panel while maintaining material behind the bore on many standard cabinet-front thicknesses, which is useful when balancing hardware placement with drawer box clearances.
The precise 1-1/2 inch bore diameter of this zinc die cast recess pull allows installers to use a single, consistent drilling setup, helping reduce layout time and rework when multiple pulls are installed on the same elevation. The matching 1-1/2 inch length and width create a 39x39mm square face, so the pull centers neatly over the round bore and provides predictable edge margins that simplify alignment with adjacent doors or drawer fronts. The 11mm depth specification gives a clear target for recessing, which supports accurate routing or boring depths so the pull body sits flush while avoiding unnecessary removal of panel material. With a 1/2 inch projection, the pull offers a shallow front lip that is easy for users to grab yet stays close to the surface, which is helpful in tight corridors or kitchen layouts where extending hardware could catch clothing. The dull chrome finish on this Stylus Series pull delivers a consistent surface across units, which matters when a long run of cabinets uses the same part number 9332-10DC-C and the visual rhythm of the hardware becomes part of the finished look.
The Stylus recess pull has a 1-1/2 inch length and 1-1/2 inch width, described as 39x39mm, giving it a compact square footprint suited for doors and drawers with limited face area.
The Stylus Series recess pull uses a 1-1/2 inch bore diameter, so the cutout matches the pull body for a tight, integrated fit within the cabinet or furniture front.
This zinc die cast recess pull is specified with an 11mm depth, indicating how far it extends into the panel, which helps plan front thickness and any cavity behind the face.
The Stylus recess pull has a 1/2 inch projection from the cabinet surface, providing a low-profile gripping edge that still offers enough clearance for fingers.
The 9332-10DC-C pull is made from zinc die cast material with a dull chrome finish, combining solid metal construction with a subdued metallic appearance on cabinet fronts.
This dull chrome recess pull is part of the Stylus Collection from Berenson, allowing coordinated hardware selection across a project using the same design language.
The Berenson Stylus Series zinc die cast recess pull with 39x39mm, or 1-1/2 inch by 1-1/2 inch, dimensions offers a defined 1-1/2 inch bore diameter, 11mm depth, and 1/2 inch projection that support accurate machining and a flush, low-profile grip on cabinets.
Sold In: 1 Each
