Stylus Series, Zinc Die Cast Recess Pulls 1-7/8" Bore Dia., Polished Chrome Finish

Stylus Recess Pull 50x50mm Polished Chrome Use

Stylus recess pull 50x50mm polished chrome describes a compact Berenson Corporation pull from the Stylus Series that is designed to sit recessed into the surface. The zinc die cast material provides a solid metal body that holds its shape while the recess pocket takes the hand load instead of a projecting handle. The polished chrome finish creates a smooth, bright surface that is easy to wipe down during regular cabinet or fixture cleaning. The 1-7/8 inch length and width help this pull cover a small, square cutout while keeping a tight footprint on doors or drawers. The 1-7/8 inch bore diameter works with a matching hole so the pull nests cleanly into place. The 11mm depth gives the recess enough space for fingertips while still limiting the cut depth into the panel.

Stylus Series Recess Pull Details That Matter

• The Stylus Series identity ties this pull to Berenson decorative hardware, so it matches other Stylus pieces on cabinets or furniture where a consistent style is important.
• The zinc die cast material forms a rigid recess body that supports repeated pulling force, which helps maintain alignment at the bore over time on active doors or drawers.
• The polished chrome finish presents a reflective surface that pairs with other chrome hardware, supporting a coordinated look across hinges, knobs, and pulls in the same space.
• The 1-7/8 inch length and width let the pull sit neatly over a square recess, helping installers align the part visually with door or drawer edges.
• The 11mm depth dimension defines how far the recess pocket extends into the panel, guiding drill or route depth so the front face sits flush.
• The 1/2 inch projection indicates how far the front edge stands proud of the surface, giving fingers a defined lip to pull without requiring large clearances.

Recess Pull Mounting Fit And Dimension Use

The 1-7/8 inch bore diameter on this Berenson Stylus recess pull sets the main cutout size, so the body nests evenly inside the door or drawer panel. The 50x50mm overall sizing relates closely to the 1-7/8 inch length and width, keeping the pull centered over the bore for a balanced appearance. The 11mm depth means the cavity must be cut deep enough for the recess body while preserving material at the back of the panel. The 1/2 inch projection defines how far the front edge stands forward, which helps the installer plan for finger clearance relative to adjacent fronts. The base dimensions of 1-3/4 inch help with layout when marking and squaring the recess area around the central bore.

Where This Berenson Stylus Recess Pull Works

Stylus Series Recess Pull Applications

This Berenson Stylus Series zinc die cast recess pull is sized for situations where a compact, square recessed grip is preferred over a projecting handle. The 1-7/8 inch bore diameter and matching 1-7/8 inch length and width allow the pull to occupy a tight footprint, which is useful on smaller doors or drawer fronts. The 50x50mm proportion suits layouts that follow metric or imperial spacing, helping the pull align with surrounding lines. The polished chrome finish supports use on cabinets, casework, or furniture where chrome hinges or other chrome hardware already set the visual standard. The 11mm depth and 1/2 inch projection together create a shallow, functional pocket that supports a fingertip grip without requiring deep material removal.

Stylus Recess Pull Details For Consistent Results

The zinc die cast construction of this recess pull gives a uniform casting, which helps the 1-7/8 inch square profile sit flat in a properly sized recess. That consistent shape works with the 1-3/4 inch base dimensions, aiding repeatable layout when marking multiple fronts for the same hardware. The 1-7/8 inch bore diameter closely tracks the outer dimensions, simplifying hole sizing so the pull centers itself during installation. The 11mm depth value provides a clear target for boring or routing depth, so the pull face aligns flush with the surrounding surface rather than sitting proud or recessed too far. The 1/2 inch projection ensures a defined edge remains available for pulling even when fronts are closely spaced. The polished chrome finish complements other polished chrome components, reducing visual mismatch when replacing or expanding an existing hardware run with Berenson Stylus parts.

Common Questions About Stylus Recess Pull 50x50mm

Selecting This Stylus Recess Pull For Your Project

The Berenson Stylus Series zinc die cast recess pull with 1-7/8 inch bore diameter, 50x50mm overall sizing, and 11mm depth gives a compact recessed grip built around clear dimensions. The polished chrome finish integrates with chrome-centered designs on cabinets or furniture. With defined length, width, projection, and base dimensions, this 9328-1026-C pull offers predictable layout and a shallow, functional recess for doors or drawer fronts that call for a clean, integrated pull point.