Stylus Series, Zinc Die Cast Recess Pulls 26 mm Bore Dia., Dull Chrome Finish

Stylus Recess Pull 29x29mm Dull Chrome Use

Stylus recess pull 29x29mm dull chrome identifies a Berenson Corporation Stylus Series zinc die cast recess pull, so you get a defined part for repeatable cabinet and fixture work. The 29x29 mm size described as base dimensions 1 inch and width 1-1/8 inch gives a compact square footprint that suits small doors, interior panels, or tight layouts. The 26 mm bore diameter combined with 11 mm depth creates a shallow recessed pocket, so the pull seats into the panel instead of standing proud, helping maintain a clean face line. The dull chrome finish provides a low-sheen metallic look, which can coordinate with other dull chrome decorative hardware and moldings on the same project. Being part of handles and pulls in decorative hardware sets its role as a functional handhold while contributing to the finished appearance of cabinetry or casework.

Key Stylus Series Recess Pull Details

• The Stylus Series designation from Berenson Corporation places this pull within a consistent design collection, which helps maintain visual continuity when multiple pulls are used across doors and drawers on a job.
• Zinc die cast material provides a solid, formed body for the recess pull, which supports a precise 26 mm bore interface and helps the pocket shape stay consistent from unit to unit.
• The dull chrome finish on the pull gives a muted metallic surface, which can help reduce glare under strong lighting while still matching other dull chrome decorative hardware.
• A 26 mm bore diameter paired with 11 mm depth defines the recess pocket, which guides the hole size and cutting depth needed in the panel for a snug, accurate fit.
• The projection of 1/2 inch and base dimensions noted as 1 inch with 1-1/8 inch width describe the handhold area, which helps plan finger clearance and spacing between adjacent pulls.

Recess Pull Fit, Bore Size, And Mounting Details

This Berenson Stylus Series recess pull uses a 26 mm bore diameter, which sets the required hole size in the cabinet or panel so the zinc die cast body nests correctly. The 11 mm depth works with that bore to define how deep the recess pocket extends into the material, which matters when working with thin doors or drawer fronts. A projection of 1/2 inch indicates how far the pull stands out at its highest point, providing enough relief for fingers while keeping a low profile on the surface. The base dimensions listed as 1 inch with a width of 1-1/8 inch show the overall front footprint, which helps with layout near panel edges or other hardware. The specified length of 1-1/8 inch aligns with that footprint, guiding spacing when repeating pulls along a run of doors.

Stylus Series Cabinet Application And Accuracy

Where This Zinc Die Cast Recess Pull Fits Best

This Stylus Series zinc die cast recess pull with 29x29 mm base dimensions is suited to cabinetry and casework where a compact square pull is preferred, such as smaller doors, narrow drawer fronts, or tight column layouts. Being part of the decorative hardware and moldings handles and pulls category defines its role on finished cabinet faces rather than on structural components. The 26 mm bore diameter makes it appropriate for panels where that hole size can be drilled cleanly, allowing the body to seat within the material without excessive play. With an 11 mm depth, the recess pocket is shallow enough for many standard door and drawer thicknesses, which helps maintain material strength behind the cutout. The dull chrome finish ties it to other dull chrome elements in the space, supporting consistent appearance across hinges, knobs, and pulls.

Why These Stylus Dimensions Support Consistent Results

The combination of 26 mm bore diameter and 11 mm depth gives clear drilling and boring targets, which supports consistent installation results across multiple cabinets in a run. Base dimensions identified as 1 inch by 1-1/8 inch help with repeatable layout by giving installers fixed front-face references when aligning to door edges or rail centers. The 1-1/8 inch length detail further clarifies the size envelope, which can aid templating or jig setup for repetitive work. A 1/2 inch projection offers a defined grip height, reducing guesswork when coordinating with nearby hardware that needs adequate clearance. The material being zinc die cast means each Berenson 9335-10DC-C unit shares the same molded shape, which helps doors and drawers line up visually when multiple pulls are installed across a project.

Common Stylus Recess Pull Installation Questions

Selecting This Stylus Recess Pull For Projects

The Stylus recess pull 29x29mm dull chrome from Berenson Corporation offers a defined 26 mm bore diameter and 11 mm depth, giving clear drilling dimensions for cabinetry work. Its zinc die cast construction and compact 1 inch by 1-1/8 inch base support consistent layouts across doors and drawers. The dull chrome finish aligns with other dull chrome decorative hardware and moldings, helping coordinate a unified look. For projects needing a square-format recess pull with controlled projection and a known footprint, this Stylus Series part number 9335-10DC-C provides a specific, repeatable choice for professional and dedicated DIY cabinet installations.