Stylus Series, Zinc Die Cast Recess Pulls 1-7/8" Bore Dia., Dull Chrome Finish

Stylus Recess Pull 50x50mm Dull Chrome Use

Stylus recess pull 50x50mm dull chrome describes a Berenson Corporation Stylus Series zinc die cast recess pull that supplies a compact, integrated gripping point in a cabinet or panel face. The zinc die cast material forms a rigid, stable pull body that supports repeated opening and closing without flex in normal decorative hardware applications. The dull chrome finish creates a muted metallic surface that visually coordinates with other dull chrome elements while reducing strong reflections on cabinet fronts. A stated length of 1-7/8 inches defines the overall span of the pull, helping layout spacing on doors or drawers that must align with adjacent hardware. The 1-7/8 inch bore diameter paired with an 11mm depth sets the cavity size in the panel, guiding drilling or routing so the pull sits properly recessed. Base dimensions of 1-3/4 inches frame the visible footprint, which helps plan clearances near panel edges or adjacent components.

Key Stylus Series Pull Details For Projects

• The Stylus Series designation groups this recess pull with related Berenson decorative hardware, which helps installers match this piece with other Stylus components for consistent visual styling across a cabinet run.
• The zinc die cast material creates a solid, molded pull body that delivers a defined gripping edge, which matters when a shallow recess must still provide a dependable handhold on smaller doors or drawer fronts.
• The dull chrome finish establishes a soft metallic appearance that coordinates with dull chrome fixtures, helping designers carry the same finish from pulls to hinges or other visible hardware in the same installation.
• The 1-7/8 inch length and 1-3/4 inch base dimensions define the space this pull occupies on the face, so fabricators can lay out multiple pulls in a straight line without crowding edges or neighboring hardware.
• The 1-7/8 inch bore diameter with 11mm depth defines the recess pocket size in the substrate, which lets shop crews select matching boring tools and control how flush the pull sits in the finished surface.

Recess Pull Fit, Bore Size, And Face Dimensions

The 1-7/8 inch bore diameter on this Berenson Stylus Series recess pull dictates the circular cutout size that accepts the body, so once the opening is bored to that dimension the pull seats evenly without side gaps. The 11mm depth specification defines how far into the panel the recess must extend, which keeps the pull face positioned correctly relative to the surface rather than sitting too proud or too deep. A base dimension of 1-3/4 inches controls the trim edge around the bore, helping align the visible frame square to cabinet edges during installation. The 1/2 inch projection figure describes how far any part of the pull extends beyond the surface, which is important when doors swing past walls or adjacent fronts where small clearances exist.

Using This Recess Pull In Cabinet Work

Where This Zinc Die Cast Recess Pull Fits

This Stylus series zinc die cast recess pull with 1-7/8 inch length and 1-7/8 inch bore diameter fits situations where a low profile pull is desired on cabinet doors or drawer fronts while keeping a consistent round opening size. The dull chrome finish suits applications that already rely on dull chrome decorative hardware, allowing this pull to visually align with hinges or other Berenson handles and pulls in the same area. Because the base measures 1-3/4 inches, the pull works on faces that can accept that footprint without overlapping panel edges, making it suited to standard cabinet stiles and rails where margins are defined.

Why Stylus Series Dimensions Support Consistency

The Stylus series zinc die cast construction combined with a specified 1-7/8 inch length and 1/2 inch projection allows installers to repeat hole patterns and clearances across multiple fronts, reducing layout variation from cabinet to cabinet. The fixed 1-7/8 inch bore diameter and 11mm depth create a predictable recess pocket, so once a jig or boring setup is established the same settings carry across an entire job without recalculating dimensions. Matching base dimensions at 1-3/4 inches keep the trim ring size uniform, which helps align rows of pulls and maintain even reveals between the hardware edge and panel edges. The dull chrome finish paired with the Stylus collection identity means this pull can be selected as part of a coordinated Berenson decorative hardware plan, supporting consistent appearance from one room or bank of cabinets to another.

Common Questions About This Stylus Recess Pull

Select This Stylus Pull For Sized Recess Openings

This Stylus Series, zinc die cast recess pull with 1-7/8 inch bore diameter, 11mm depth, and dull chrome finish gives cabinetmakers defined dimensions for consistent recess openings and visible footprints. For projects using Berenson decorative hardware in dull chrome, this pull aligns size, appearance, and recess geometry so repetitive boring and front layout stay uniform from one cabinet or drawer front to the next.