Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Grass TEC 864 face frame hinges are equipped with an adjustable switch to regulate the closing action of the hinge, so installers can tune soft-close performance for different door sizes and weights. The hinge incorporates a pre-mounted soft-close damper within the cup, which controls the door at the end of travel for a smooth, noiseless closing motion. This concealed cabinet hinge is a one piece hinge and base plate combination, reducing separate parts during installation on face frame cabinets. The zinc die-cast hinge with a sleek nickel finish offers a 108 degree opening angle, giving wide access to cabinet interiors while keeping the hardware hidden when the door is closed. As a concealed face frame hinge, it supports a clean exterior appearance on overlay cabinet doors while handling everyday door cycles in kitchen, bath, and shop environments.
Front locating tabs position the hinge on the face frame, giving a repeatable reference point that speeds layout, drilling, and screw positioning. The TEC 864 design offers 3 dimensional adjustment, so doors can be aligned in height, side, and depth after mounting for tight, even reveals. Cam side and depth adjustment with height adjustment at the mounting screw provide tool-based fine-tuning without removing the door, which is useful for final fit on site. The hinge works with current insertion machinery, supporting shop production where boring and insertion are already standardized. Grass TEC 864 face frame hinges are available in 42 mm and 45 mm boring patterns, so casework can follow established drilling programs.
This concealed cabinet hinge is part of the Grass TEC 864 line, designed as a face frame hinge for overlay cabinet doors. The 1-3/8 inch wrap soft-close configuration identified in the description aligns with common overlay needs, which helps match doors to face frame sizing in kitchen and bath work. The 10.7 mm (7/16 inch) cup drilling depth suits standard hinge cup boring practice, so boring setups can stay consistent across door batches. Front locating tabs position the hinge on the face frame, which helps installers hold a consistent setback and vertical location from cabinet to cabinet. Because the hinge works with current insertion machinery, shops that already bore and insert hinges mechanically can run this model through existing lines without changing basic process steps.
The 3 dimensional adjustment capability lets installers correct reveals after the doors are hung, which helps resolve minor case or door variations without re-boring or re-drilling. Cam side and depth adjustment give precise lateral and in-out control, which supports tight gaps and flush alignment with neighboring doors and drawer fronts. Height adjustment at the mounting screw offers vertical tuning without moving the cup in the door, so adjustments stay quick during punch-list work. The 108 degree opening angle allows doors to swing clear enough for interior hardware installation and user access, while keeping motion controlled by the pre-mounted soft-close damper within the cup. Availability in both 42 mm and 45 mm boring patterns supports different shop standards, which is useful when matching existing cabinet runs or coordinating with multiple boring machines. The zinc die-cast hinge construction and nickel finish contribute to a precise concealed mechanism that stays protected inside the cabinet environment.
Grass TEC 864 face frame hinges are part of a concealed cabinet hinge class, so they are used on face frame cabinets where hidden hardware and overlay doors are required.
Grass TEC 864 face frame hinges offer a 108 degree opening angle, allowing doors to swing wide for cabinet access while keeping the hinge concealed when closed.
Grass TEC 864 face frame hinges are equipped with an adjustable switch and a pre-mounted soft-close damper within the cup, allowing regulation of the closing action for controlled, noiseless door movement.
Grass TEC 864 face frame hinges provide 3 dimensional adjustment, using cam side and depth adjustment with height adjustment at the mounting screw for final door alignment.
Grass TEC 864 face frame hinges use a 10.7 mm cup drilling depth and are available in 42 mm and 45 mm boring patterns, aligning with common cabinet boring programs.
Grass TEC 864 face frame hinges use a zinc die-cast hinge with a sleek nickel finish, supporting a concealed look and protected moving parts inside the cabinet.
Grass TEC 864 face frame hinges combine a one piece hinge and base plate with 3 dimensional adjustment, letting installers hang and fine-tune overlay doors efficiently. The adjustable soft-close damper within the cup supports quiet, controlled closing that suits kitchen, bath, and shop cabinets. With a 108 degree opening angle, 10.7 mm cup drilling depth, and availability in both 42 mm and 45 mm boring patterns, this concealed cabinet hinge fits established drilling setups while supporting clean, modern cabinet fronts. For projects using Grass America concealed cabinet hinges, this TEC 864 model aligns hinge performance with face frame construction demands.
Sold In: 1 Each
