Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Grass TEC 864 soft-close hinge is a concealed cabinet hinge designed for 3/4 inch overlay face-frame doors, giving a clean look while keeping the hardware out of sight. The hinge is built as a one piece hinge and base plate combination, so the mounting relationship between parts is fixed at the factory, helping maintain consistent alignment across a run of doors. A pre-mounted soft-close damper within the cup controls the closing action, so doors are guided to close quietly against the frame instead of slamming. The hinge offers a generous 108 degree opening angle, which allows doors to swing wide for access while still controlling door movement at the end of travel. The hinge uses a nickel finish over a zinc die-cast hinge body, providing a hard-wearing concealed surface that blends with other modern cabinet hardware.
This concealed cabinet hinge is designed as a face frame hinge, so it positions directly on the frame rather than a separate plate, keeping the layout straightforward on typical framed cabinetry. The hinge is available in 42 mm and 45 mm boring patterns, which ties into standard hinge boring equipment and lets shops match their existing drill pattern on new or replacement doors. A 10.7 mm, or 7/16 inch, cup drilling depth is specified, providing a clear target for boring operations and helping ensure the cup sits properly without breaking through thinner door panels. The hinge is described as a dowel version, so it is set up for use with insertion machinery that seats the hinge into pre-bored holes. Grass notes that the TEC 864 works with current insertion machinery, which matters to production shops aiming to keep existing boring and insertion lines in service.
This Grass America concealed cabinet hinge fits into the concealed face frame hinges category, so it is aimed at framed cabinet construction where a hidden hinge is preferred. The 3/4 inch overlay design suits doors that cover most of the face frame stile, which is common in many kitchen, bath, and built-in layouts. Because the hinge uses front locating tabs to position hinge on face frame, it can repeat positioning across multiple openings, which is valuable on long runs of similar cabinets. The 42 mm and 45 mm boring patterns allow the same hinge family to drop into different boring setups, helping shops standardize hardware even when machinery differs between lines. The 10.7 mm, or 7/16 inch, cup drilling depth specification supports typical door thicknesses used in face-frame work, keeping the cup seated securely without sacrificing the front face of the door.
The pre-mounted soft-close damper within the cup gives each door controlled closing, which is especially important in kitchens and commercial spaces where doors are operated constantly. A generous 108 degree opening angle supports access to interior storage, allowing pull-out trays or interior fittings to be reached more easily while the hinge still keeps the door attached securely to the frame. The nickel finish matches many other nickel-plated cabinet components, so the interior hardware has a consistent visual appearance when doors are open. Since the hinge is made in USA, it fits project requirements that specify domestic sourcing or prefer short, dependable supply chains for repeat orders and maintenance work. The face frame design and overlay style together place this hinge as a practical choice for both new cabinet builds and straightforward hardware updates within the same overlay range.
The Grass TEC 864 hinge offers cam side and depth adjustment with height adjustment at mounting screw, so installers can fine-tune door gaps and flushness after the hinge is mounted.
The hinge uses a pre-mounted soft-close damper within the cup, which slows the closing motion of the door and brings it to a controlled, quiet close against the face frame.
The Grass TEC 864 hinge provides a 108 degree opening angle, giving wide access to cabinet interiors while maintaining a controlled swing that works well in typical face-frame layouts.
The hinge is available in 42 mm and 45 mm boring patterns, allowing it to integrate with standard cabinet door boring equipment used in many production and shop environments.
The hinge uses a 10.7 mm, or 7/16 inch, cup drilling depth in the door, which sets the hinge cup securely into the panel for concealed mounting.
The hinge is a zinc die-cast hinge with a nickel finish, providing a smooth concealed surface that matches typical cabinet hardware and resists wear in everyday use.
The Grass TEC 864 soft-close hinge with 3/4 inch overlay face-frame design, nickel finish, and 108 degree opening angle gives installers a concealed hinge that matches common cabinet layouts while controlling door motion. The one piece hinge and base plate combination, 10.7 mm, or 7/16 inch, cup drilling depth, and front locating tabs position hinge on face frame to support straightforward, repeatable mounting. With cam side and depth adjustment and height adjustment at mounting screw, the hinge lets you dial in door alignment across a full run using the same hardware family. For projects calling for concealed cabinet hinges from a proven brand, this TEC 864 hinge from Grass America is ready to slot into face-frame work using standard boring patterns.
Sold In: 1 Each
