Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Grass TEC 864 face frame hinges are designed as concealed cabinet hinges for 1/2 inch overlay applications, so doors sit properly over face frames while staying hidden in day-to-day use. These Grass America hinges are part of the concealed face frame hinge class, which keeps the hardware out of sight and supports a clean cabinet appearance on installed runs. The hinge and base plate form a one piece hinge and base plate combination, reducing separate alignment steps during layout. A pre-mounted soft-close damper is integrated within the cup, so the soft-close function is built into the hinge body for consistent closing action. An adjustable switch regulates the closing action of the hinge, allowing the installer to set the soft-close response to the cabinet run. The generous 108 degree opening angle gives doors wide access, which is helpful on face-frame cabinets where interior clearance matters.
Grass TEC 864 soft-close 1/2 inch overlay face-frame hinges use front locating tabs to position the hinge on the face frame, which speeds up layout and keeps cup and frame alignment consistent from door to door. The hinges are designed to work with current insertion machinery, fitting into existing boring and insertion workflows in cabinet shops. A cup drilling depth of 10.7 mm, or 7/16 inch, sets a clear target for drilling the door, which helps maintain a consistent seating depth for the hinge cup. Three dimensional adjustment is built into the design, combining cam side and depth adjustment with height adjustment at the mounting screw, so doors can be aligned in side, in and out, and up or down after hanging. These details give installers room to correct small drilling or mounting variances without reworking the door.
Grass TEC 864 soft-close 1/2 inch overlay face-frame hinges are used on face-frame cabinets where a concealed cabinet hinge is needed to keep hardware hidden when doors are closed. The 1/2 inch overlay configuration suits layouts where the door overlays the face frame by that amount, giving a predictable reveal along cabinet runs. The generous 108 degree opening angle supports cabinets that need wider access, such as base cabinets or frequently used wall cabinets, because the door swings clear of the opening. Being part of the concealed face frame hinge category, these hinges work in cabinet programs that prioritize a clean look while still expecting precise alignment and repeatable drilling. Grass America manufacturing supports cabinetmakers looking for a named brand concealed hinge with soft-close performance built into the cup.
The one piece hinge and base plate combination reduces the number of separate parts to align, which can cut down on cumulative error across multiple doors during installation. Front locating tabs position the hinge on the face frame, acting as physical references for locating the hinge without repeated measuring, so hinge placement stays consistent across a run of cabinets. Three dimensional adjustment, using cam side and depth adjustment with height adjustment at the mounting screw, lets installers fine-tune reveals and door position in all key directions, which reduces the need to redrill or plug and move mounting points. The pre-mounted soft-close damper located within the cup concentrates the closing control at the hinge, so the door slows near the frame for a quieter close. An adjustable switch for the closing action gives an additional layer of control, helping align the feel of the soft-close across doors of different sizes or weights. Availability in 42 mm and 45 mm boring patterns means shops running standard boring patterns can apply the same hinge family across various door programs without changing drilling setups, supporting efficient production.
Grass TEC 864 soft-close 1/2 inch overlay face-frame hinges are used on face-frame cabinets, so the hinge mounts to the frame while the door overlays by 1/2 inch.
Grass TEC 864 face frame hinges provide a 108 degree opening angle, allowing doors to swing well away from the face frame for easier cabinet access.
Grass TEC 864 hinges use a pre-mounted soft-close damper within the cup, so the soft-close action is integrated directly into the concealed hinge body.
Grass TEC 864 hinges feature an adjustable switch to regulate the closing action, allowing the soft-close response to be tuned to the application.
Grass TEC 864 hinges use a cup drilling depth of 10.7 mm, or 7/16 inch, which guides door boring for correct hinge seating.
Grass TEC 864 face frame hinges are specified to work with current insertion machinery, fitting common cabinet shop boring and insertion equipment.
Grass TEC 864 face frame hinges combine concealed mounting, soft-close performance, and three dimensional adjustment, which supports accurate door alignment on 1/2 inch overlay face-frame cabinets. The 108 degree opening angle, integrated soft-close damper, and front locating tabs create a workable solution for both new cabinet builds and shop programs already using 42 mm or 45 mm boring patterns. For cabinet projects where a concealed face frame hinge with regulated soft-close action and consistent mounting geometry is needed, TEC 864 02750A-15 hinges from Wurth Baer Supply provide the verified details to match cabinet shop workflows.
Sold In: 1 Each
