Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Grass TEC 864 face frame hinges provide a concealed cabinet hinge solution that keeps hardware out of sight while managing the swing of 1-1/4 inch overlay doors on face-frame cabinets. The hinge design combines the hinge and base plate into one piece, so the installer works with a single concealed cabinet hinge component at each door location. A pre-mounted soft-close damper sits inside the hinge cup, slowing the door at the end of travel for noiseless closing in day-to-day cabinet use. The hinge offers a 108 degree opening angle, giving wide access into the cabinet while controlling the arc of the door. Front locating tabs position the hinge on the face frame during layout, so alignment is guided by the hardware itself rather than loose reference marks. The zinc die-cast hinge body in a nickel finish provides a consistent appearance across installations using this Grass America concealed cabinet hinge.
The Grass TEC 864 soft close hinge uses 10.7 mm, or 7/16 inch, cup drilling depth, so the hinge cup preparation follows that fixed depth specification in door machining. Available 42 mm and 45 mm boring patterns give options for matching cabinet drilling equipment and layout standards in the shop. Cam side and depth adjustment provide two of the three dimensional settings at the hinge arm, and height adjustment occurs at the mounting screw, so installers can move the door side-to-side, in-and-out, and up-and-down using the hardware interfaces. Front locating tabs on the hinge body rest against the face frame during placement, helping position the concealed cabinet hinge consistently from cabinet to cabinet. Because the hinge works with current insertion machinery, production environments can feed the hinge through existing boring and insertion stations set up to those patterns.
Grass TEC 864 face frame hinges are categorized as concealed face frame hinges, so they are intended for cabinets where the door overlays a face frame rather than frameless box sides. The 1-1/4 inch overlay reference in the product name describes the door overlay dimension this hinge is built to support on face-frame cabinets using the specified boring and mounting geometry. The generous 108 degree opening angle suits cabinets that need doors to swing wide for access while retaining control of the door path. Because the hinge is made as a one piece hinge and base plate combination, it mounts directly to the face frame without a separate base plate component. The hinge is part of the Grass America line of concealed cabinet hinges, so it ties into a hardware family used across many cabinetry projects.
The three dimensional adjustment capability on the Grass TEC 864 soft close hinge means cam side and depth adjustment combined with height adjustment at the mounting screw can be used to align doors after mounting. This lets installers bring reveals into line along the face frame and set the in-and-out position so doors sit flush with adjacent fronts. The front locating tabs that position the hinge on the face frame assist initial placement, reducing the amount of later correction needed during adjustment. The adjustable switch that regulates the closing action gives control over how firmly or gently the soft-close damper engages, which matters when door sizes vary across a run of cabinets. Because the hinge works with current insertion machinery and specified 42 mm and 45 mm boring patterns, shops can maintain repeatable hole placement from cabinet to cabinet. The 10.7 mm, or 7/16 inch, cup drilling depth keeps the hinge cup seating consistent, supporting accurate overlay and reliable soft-close damper performance across multiple doors.
Grass TEC 864 face frame hinges are described as concealed face frame hinges, so they are used where a cabinet door overlays a face frame instead of mounting directly to a frameless side panel.
The Grass TEC 864 soft close hinge offers a 108 degree opening angle, allowing doors to swing wide for cabinet access while keeping motion controlled along the hinge arc.
The Grass TEC 864 hinge uses a pre-mounted soft-close damper within the cup and an adjustable switch, so the closing action is regulated for noiseless door closing on face-frame cabinets.
The Grass TEC 864 soft close hinge specifies a 10.7 mm, or 7/16 inch, cup drilling depth, so the door cup hole is machined to that depth to seat the hinge body correctly.
The Grass TEC 864 hinge is available in 42 mm and 45 mm boring patterns, allowing cabinet shops to match existing boring equipment setups and layout standards.
The Grass TEC 864 hinge offers cam side and depth adjustment with height adjustment at the mounting screw, providing three dimensional door positioning on the face frame.
The Grass TEC 864 face frame hinges combine a one piece hinge and base plate design, three dimensional adjustment, and a pre-mounted soft-close damper, so they support both installation workflow and finished cabinet function. The 1-1/4 inch overlay intent and 108 degree opening angle define how doors will sit and move on face-frame cabinets using this hardware. With 10.7 mm cup drilling depth and 42 mm or 45 mm boring pattern options, the hinge integrates into established machining setups in many shops. For projects that call for concealed cabinet hinges with soft closing on face-frame layouts, this Grass America TEC 864 soft close hinge is built to deliver that configuration.
Sold In: 1 Each
