Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Grass TEC 864 face frame hinge gives a concealed, soft-closing solution for cabinet doors where a 1/2 inch overlay is needed on a face frame. This hinge belongs to the concealed cabinet hinges class, so it hides inside the cabinet layout while controlling the door movement. A pre-mounted soft-close damper is built into the hinge cup to regulate the closing motion, which helps doors settle quietly against the frame. The hinge offers a 108 degree opening angle that lets the door swing wide while still controlling the arc of movement at the frame. An adjustable switch regulates the closing action at the hinge itself, so the closing feel can be tuned to the door. The one piece hinge and base plate combination keeps alignment behavior consistent across a run of doors.
This face frame hinge is designed to work on face frame cabinets with front locating tabs that position the hinge against the framing, which simplifies where the hinge sits before fastening. Cup drilling depth is 10.7 mm, so the hinge cup recess is set to that depth in the door, guiding boring setup when preparing multiple doors. The TEC 864 hinge uses cam side and depth adjustment with height adjustment at the mounting screw, so the door can be shifted in three dimensions after mounting. This 3 dimensional adjustment lets the installer fine tune overlay, in-out position, and vertical alignment so reveals can be dialed in without redrilling. The hinge is available in 42 mm and 45 mm boring patterns, providing options to match existing boring equipment or current insertion machinery.
This Grass America hinge is a concealed face frame hinge intended for cabinets that use a face frame construction with a 1/2 inch overlay door. The front locating tabs position the hinge on the face frame during installation, so the cup relates predictably to the frame edge on each door. With a 10.7 mm cup drilling depth and availability in 42 mm and 45 mm boring patterns, the hinge aligns with common cabinet boring setups, which is useful when running doors on current insertion machinery. The 108 degree opening angle gives doors enough swing to clear typical cabinet fronts while keeping the hinge geometry consistent across upper and base cabinets set to this opening range. The nickel finish over the zinc die-cast hinge blends into most cabinet interiors, so the hardware remains discreet when the door is open.
The TEC 864 soft-close hinge integrates a pre-mounted damper inside the cup, so the closing control is part of the hinge body rather than a separate add-on. This design keeps door motion tied directly to the hinge geometry, which helps with uniform soft-closing behavior across a bank of doors. An adjustable switch on the hinge allows the closing action to be regulated, so the damping effect can be tuned after installation to match the door size or desired closing feel. The one piece hinge and base plate combination keeps the arm and frame connection factory-set, which helps reduce alignment variables during layout. Cam side and depth adjustment with height adjustment at the mounting screw provide full 3 dimensional hinge tuning, letting installers adjust overlay, side gaps, and door height while the door is mounted. The hinge is described as working with current insertion machinery, which supports efficient production workflows where hinges are pressed into pre-bored doors on line equipment.
Grass TEC 864 face frame hinge is intended for face frame cabinets with a 1/2 inch overlay, so the door overlays the frame edge by that amount while the hinge stays concealed.
The TEC 864 hinge has a pre-mounted soft-close damper in the cup, which slows the door near closing so it settles quietly against the frame instead of slamming.
The TEC 864 hinge offers cam side and depth adjustment with height adjustment at the mounting screw, allowing three dimensional tuning of overlay, side gaps, and vertical door position.
The Grass TEC 864 hinge provides a 108 degree opening angle, giving the door a wide swing that improves cabinet access while keeping movement controlled at the frame.
This TEC 864 hinge is available in 42 mm and 45 mm boring patterns, so boring layouts can align with existing drilling equipment and production settings.
The Grass TEC 864 hinge is a zinc die-cast hinge with a sleek nickel finish, giving a rigid hinge structure and a neutral surface for typical cabinet interiors.
Choose this Grass TEC 864 soft-close face frame hinge when a concealed cabinet hinge is needed for 1/2 inch overlay doors on face frame construction. The zinc die-cast, nickel-finished hinge combines a one piece hinge and base plate with a pre-mounted soft-close damper in the cup. An adjustable switch regulates the closing action, and three dimensional adjustment is available through cam side and depth adjustment and height adjustment at the mounting screw. With a 10.7 mm cup drilling depth, 108 degree opening angle, and options for 42 mm or 45 mm boring patterns, this hinge supports both shop production and jobsite cabinet work.
Sold In: 1 Each
