Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Grass TEC 864 face frame hinges bring soft-close performance to 1/2 inch overlay cabinet doors, so doors shut in a controlled motion that reduces slamming in busy kitchen or shop environments. The hinge uses a concealed design, so the hardware stays out of sight when the door is closed, supporting a clean cabinet look on finished installations. A pre-mounted soft-close damper is built into the hinge cup, so the closing action is managed inside the hinge rather than by separate components that could take extra layout time. The nickel finish on the hinge presents a consistent, neutral appearance inside the cabinet, which helps maintain a professional look across mixed hardware runs. The zinc die-cast hinge body delivers a solid feel at the pivot points, supporting repeatable motion over many open and close cycles.
The TEC 864 face frame hinge is designed around a 10.7 mm cup drilling depth, so the cup hole depth can be bored to a clear, repeatable value across all doors to control fit. The hinge is available in 42 mm and 45 mm boring patterns, giving options to match existing boring layouts or machinery setups. Front locating tabs help index the hinge to the face frame edge, which simplifies initial positioning before fastening. Three dimensional adjustment is built into the design, with cam side and depth adjustment combined with height adjustment at the mounting screw, so the installed door can be brought into alignment on the case without reboring or remounting the hinge cup.
This Grass TEC 864 soft-close 1/2 inch overlay face-frame hinge is used on face-frame cabinets where a 1/2 inch overlay door is specified, so the door edge properly overlaps the frame while using a concealed hinge layout. The generous 108 degree opening angle makes the hinge suitable for base and wall cabinet doors that need comfortable reach-in access, supporting everyday kitchen, bath, or shop cabinet use. The one piece hinge and base plate combination fits concealed cabinet hinge applications in the Grass America line, so installers can standardize on a single assembly for many face-frame positions. The nickel finish supports use in cabinets where interior hardware is visible when doors are open, helping match other nickel-toned components in the same run. The hinge is part of the concealed cabinet hinges category, so it serves where exposed hinges are not desired.
The TEC 864 hinge incorporates three dimensional adjustment, which matters when aligning doors across a long bank of cabinets to tight reveals. Cam side adjustment lets the installer move the door sideways at the hinge, helping set consistent gaps between adjacent doors without remounting. Depth adjustment through the cam allows the door to move in or out relative to the face frame, which is useful for flushing doors to the cabinet front or compensating for variations in door thickness. Height adjustment at the mounting screw means the door can be shifted up or down on the frame after the hinge is mounted, allowing vertical alignment with neighboring doors or drawer fronts. The adjustable switch that regulates the closing action provides another tuning point, so the soft-close behavior can be adapted when door size or weight changes across the project.
The Grass TEC 864 hinge serves face-frame cabinets with 1/2 inch overlay doors, so the door overlaps the frame while using a concealed hinge layout on traditional framed construction.
The TEC 864 hinge offers a 108 degree opening angle, which lets doors swing wide enough for comfortable interior access without moving into an extreme open position.
The TEC 864 hinge uses a pre-mounted soft-close damper within the hinge cup, so the soft-close function operates directly at the hinge for a controlled, quieter closing motion.
The 10.7 mm cup drilling depth defines how deep to bore the hinge cup hole, which sets the hinge seating and helps keep overlay and reveal consistent across all doors.
The front locating tabs position the hinge on the face frame edge, which speeds layout and supports consistent door alignment from cabinet to cabinet.
Three dimensional adjustment on the TEC 864 hinge lets the door move side, depth, and height, which simplifies dialing in reveals and flushness after the hinges are mounted.
This Grass TEC 864 soft-close 1/2 inch overlay face-frame hinge in nickel combines a concealed cup design, 108 degree opening angle, and three dimensional adjustment, so it addresses both functional and alignment demands on framed cabinets. The one piece hinge and base plate combination, front locating tabs, and defined 10.7 mm cup drilling depth streamline drilling and mounting steps across repetitive work. For projects built around Grass America concealed cabinet hinges, this TEC 864 model provides a soft-close option that matches 1/2 inch overlay requirements while fitting into established boring patterns and insertion machinery workflows.
Sold In: 1 Each
