Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Grass TEC 864 soft-close hinge is a concealed face frame cabinet hinge that combines hinge and base plate into a single piece, which streamlines layout and speeds repetitive installation work. This hinge provides a 1/4 inch overlay application on face frame cabinets, so doors cover the frame consistently while still leaving proper reveal. The hinge uses a zinc die-cast construction with a nickel finish, giving a sturdy feel while matching other common nickel cabinet components in a run of cabinets. A pre-mounted soft-close damper is built into the cup, so the door closes quietly and slows near the end of travel during everyday use. The hinge offers a generous 108 degree opening angle, which lets doors swing wide enough for access to cabinet interiors without the door feeling over-extended in normal kitchen or shop layouts.
This concealed face frame hinge uses front locating tabs that position the hinge on the face frame, helping installers seat each hinge in a repeatable location before boring and insertion. The hinge is designed with dowel insertion and a 42 mm boring pattern, so it works with current insertion machinery on cabinet production lines that use this standard pattern. The hinge cup requires a 10.7 mm, or 7/16 inch, cup drilling depth, guiding drill setup for consistent seating of the cup in the door. Three dimensional adjustment is provided, with cam side and depth adjustment combined with height adjustment at the mounting screw, giving installers the ability to move the door in, out, up, down, and sideways for final alignment. This adjustment flexibility helps bring doors into uniform reveal and alignment across a bank of cabinets without re-drilling.
This TEC 1/4 inch overlay hinge is intended for face frame cabinets that require a modest overlay, so it supports framed kitchen or bath runs where doors sit partly over the frame. The hinge fits into the concealed cabinet hinge class, making it suited to jobs where visible hardware on the door front is not desired. The 108 degree opening angle is practical for base and wall cabinets because it opens far enough for pull-out items or shelf access while still controlling the swing. Grass face frame hinges work with current insertion machinery, so shops using boring and insertion equipment with a 42 mm pattern can integrate this hinge into existing drilling programs without changing the fundamental machine interface. The hinge is made in USA, which gives shops a domestically produced option for projects that specify origin requirements.
The Grass TEC 864 soft-close face frame hinge uses a pre-mounted damper within the cup, so the soft-close system sits inside the hinge rather than on the frame or door, reducing extra parts to handle during installation. The adjustable switch to regulate the closing action allows the soft-close strength to be changed, helping installers balance the closing motion with different door weights across a project. Cam side and depth adjustment, combined with height adjustment at the mounting screw, provide full three dimensional adjustment so doors can be nudged into fine alignment after the hinges are fixed in place. This adjustment capability simplifies achieving parallel reveals along the frame and across multiple doors, limiting the need for re-boring or door rework. Front locating tabs on the hinge position the hinge on the face frame, so each hinge seats in a similar spot, supporting consistent drilling and mounting when repeating the same layout over many cabinets.
The Grass TEC 864 soft-close hinge is designed for face frame cabinets with a 1/4 inch overlay, supporting framed layouts where the door partially covers the frame.
The Grass TEC 864 hinge has a pre-mounted soft-close damper within the cup and an adjustable switch, so the closing action can be regulated for a controlled, quieter door close.
The Grass 02788A-15 hinge offers a 108 degree opening angle, giving wide access to cabinet interiors while keeping the door movement within a manageable swing range.
The Grass TEC 864 hinge uses cam side and depth adjustment, along with height adjustment at the mounting screw, allowing three dimensional door alignment after mounting.
The hinge cup requires a 10.7 mm, or 7/16 inch, cup drilling depth and is available in a 42 mm boring pattern, matching common cabinet insertion machinery setups.
The Grass TEC 864 face frame hinge is a zinc die-cast hinge with a nickel finish, giving a solid feel and a neutral metal appearance on cabinet interiors.
The Grass TEC 864 soft-close hinge from Grass America combines a one piece hinge and base plate, soft-close damper, and 1/4 inch overlay layout, which works well for framed cabinet runs. With a 42 mm boring pattern, 10.7 mm cup drilling depth, and three dimensional adjustment, this concealed face frame hinge supports efficient drilling, insertion, and alignment on production or remodel jobs. When a project calls for a nickel finished, concealed face frame hinge with 108 degree opening and adjustable soft-close action, this Grass 02788A-15 hinge offers a focused solution for that set of requirements.
Sold In: 1 Each
