Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Grass TEC 864 soft-close hinge is a concealed cabinet hinge designed for 3/4 inch overlay face-frame doors, so it lets doors cover most of the frame while keeping hardware out of sight. The zinc die-cast hinge body with a nickel finish provides a clean, uniform look that aligns well across a full run of cabinets. A generous 108 degree opening angle allows doors to swing wide, helping with access during installation and everyday use. The hinge is a one piece hinge and base plate combination, which keeps the mounting layout consistent on face-frame jobs. A pre-mounted soft-close damper within the cup regulates the closing motion, so the door slows down at the end of travel. An adjustable switch lets you regulate the closing action, which matters when you are dialing in door movement on different door sizes or weights.
This 3/4 inch overlay face-frame hinge uses a dowel design in a 42 mm boring pattern, so it drops into standard 35 mm cup holes laid out on that pattern. The 10.7 mm, or 7/16 inch, cup drilling depth determines the bore depth on the door, which helps avoid drilling through thinner doors. Cam side and depth adjustment, combined with height adjustment at the mounting screw, provide 3 dimensional adjustment so doors can be shifted side-to-side, in-and-out, and up-and-down. That range of adjustment is useful for bringing multiple doors into alignment on an installed run. Front locating tabs on the hinge position it on the face frame, which gives a positive reference during installation and helps keep reveals even.
This Grass America concealed cabinet hinge is intended for face-frame construction with 3/4 inch overlay doors, so it fits typical framed kitchen and bath cabinets. The one piece hinge and base plate combination simplifies planning on these builds, because there is a single component at each hinge location. The dowel style and 42 mm boring pattern work with current insertion machinery, allowing shops with line-boring or insertion equipment to press hinges directly into pre-bored doors. The 108 degree opening angle suits wall and base cabinets where wide access is needed but an extreme opening is not required, keeping door swing controlled around adjacent cabinets. The nickel finish also helps visually match other nickel-finished components in a project.
The adjustable switch that regulates the closing action lets installers tune soft-close performance cabinet by cabinet, which is helpful when balancing closing speed across different door widths. A pre-mounted damper within the cup means the soft-close function sits at the hinge pivot, so the slowing force is applied where the door actually moves. Cam side and depth adjustment give fine control over gap and overlay, while height adjustment at the mounting screw supports vertical alignment along the face frame. Together, those 3 dimensional adjustments let you correct small drilling variances without re-boring. Front locating tabs on the hinge body provide a mechanical stop against the frame, guiding hinge placement on every cabinet. The zinc die-cast construction supports stable hinge geometry, so once adjustments are set they remain consistent across the full swing of the 108 degree opening angle.
The Grass TEC 864 soft-close hinge is designed for face-frame cabinets with 3/4 inch overlay doors, so it aligns door edges relative to the frame in framed kitchen or bath layouts.
The Grass TEC 864 soft-close hinge uses a pre-mounted damper within the cup and an adjustable switch to regulate the closing action, so doors slow down before contacting the frame.
The hinge uses a 10.7 mm, or 7/16 inch, cup drilling depth in a 42 mm boring pattern, so doors are bored to a standard depth and spacing for concealed hinge cups.
The Grass TEC 864 hinge provides cam side and depth adjustment, with height adjustment at the mounting screw, giving 3 dimensional adjustment to fine-tune door gaps and overlay.
The hinge offers a 108 degree opening angle, which allows wide access into the cabinet while keeping the door swing controlled relative to adjacent units or walls.
The Grass TEC 864 soft-close hinge works with current insertion machinery and standard 42 mm or 45 mm boring patterns, fitting common cabinet drilling and insertion setups.
The Grass TEC 864 soft-close hinge with 3/4 inch overlay, 108 degree opening angle, and 42 mm boring pattern suits face-frame cabinet runs that need concealed hardware and adjustable alignment. Using this one piece hinge and base plate combination helps standardize drilling, insertion, and adjustment steps at the bench or on site. For projects built around Grass America concealed cabinet hinges, matching this 02825A-15 model across a job keeps motion, overlay, and appearance consistent from cabinet to cabinet.
Sold In: 1 Each
