Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Grass TEC 864 face frame hinges are soft-close concealed cabinet hinges that regulate closing with an adjustable switch, so doors can be tuned for a controlled, quiet shut on completed installs. The pre-mounted soft-close damper sits inside the hinge cup, which keeps the mechanism hidden while it slows the door for reduced slamming on face-frame cabinets. These hinges are a one piece hinge and base plate combination, which simplifies layout and mounting compared to multi-part hinge systems. The nickel finish sits over a zinc die-cast hinge body, giving a clean concealed look when doors are open while maintaining a solid feel at the pivot points. A 108 degree opening angle lets doors swing wide for cabinet access while still working within typical face-frame clearances. This version is part number 02834A-15, tying it directly to Grass America TEC 864 specifications.
These Grass TEC 864 soft-close hinges are designed as concealed face frame hinges, so they mount to cabinet face frames while staying hidden from the front when doors are closed. The 10.7 mm, or 7/16 inch, cup drilling depth defines the bore depth into the door, guiding boring setup for repeatable machining. Cam side and depth adjustment give installers clear control over side gap and in-and-out positioning after mounting, which is important for setting reveals against face frames. Height adjustment at the mounting screw adds vertical tuning without reboring, allowing doors to be shifted up or down to correct for small layout variances. The 42 mm boring pattern on this version ties into common line-boring and insertion machinery setups, supporting faster, consistent production work.
Grass TEC 864 soft-close 1 inch overlay face-frame hinges are part of the concealed cabinet hinges category, so they serve in cabinet work where a face frame is present and the door overlays the frame. The hinge cup drilling depth of 10.7 mm, or 7/16 inch, aligns with standard concealed hinge boring practices, which fits typical cabinet door thicknesses used in many shops. Front locating tabs on the hinge position it on the face frame, so during installation the hinge references the frame edge for repeatable placement. The 108 degree opening angle offers a generous swing for day-to-day cabinet access, supporting kitchen, bath, and general storage layouts that need clear reach into the interior. Because these hinges work with current insertion machinery, they integrate into CNC or line-boring workflows used by professional cabinet shops.
The one piece hinge and base plate combination means the mounting geometry is fixed within a single component, which reduces the chance of mismatch between hinge and plate during layout or replacement. The adjustable switch that regulates closing action lets installers dial in soft-close behavior so multiple doors along a run shut with similar speed and feel. With cam side and depth adjustment plus height adjustment at the mounting screw, these hinges provide true 3 dimensional adjustment, which helps correct small drilling tolerances or frame variations without rework. The nickel finish over the zinc die-cast hinge keeps the hardware visually consistent from cabinet to cabinet, which matters when doors are open and multiple hinges are visible. Being made in USA, these hinges align with shop requirements that look for domestic production when specifying hardware for repeat projects. The availability in both 42 mm and 45 mm boring patterns across the series supports using the same TEC 864 platform in different cabinet lines that share overall styling but use different boring systems.
The Grass TEC 864 is a concealed face frame hinge in the concealed cabinet hinges class, so it stays hidden from the front and works with face-frame cabinet construction.
The Grass TEC 864 soft-close hinge uses a pre-mounted soft-close damper within the cup, and an adjustable switch regulates the closing action for tuned door movement.
The Grass TEC 864 hinge offers a 108 degree opening angle, which allows wide door swing and good cabinet access while remaining within typical face-frame clearances.
The Grass TEC 864 hinge provides cam side and depth adjustment, along with height adjustment at the mounting screw, giving 3 dimensional control over door reveals.
The Grass 02834A-15 TEC 864 hinge uses a 10.7 mm, or 7/16 inch, cup drilling depth and a 42 mm boring pattern, fitting common cabinet door boring setups.
The Grass TEC 864 hinge is designed for face-frame cabinets and works with current insertion machinery, supporting production-oriented woodworking shop workflows.
The Grass TEC 864 soft-close 1 inch overlay face-frame hinge with nickel finish combines a one piece hinge and base plate design, 108 degree opening angle, and 3 dimensional adjustment, giving installers practical control over door swing, closing feel, and reveal alignment on face-frame cabinets.
Sold In: 1 Each
