
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Berenson Dierdra cabinet pull is a zinc cabinet handle from the Dierdra collection in an oil rubbed bronze finish, so it delivers a specific look with a known material for coordinated kitchen or bath runs. The 6-5/16 inch center to center dimension, also listed as 160 mm, sets accurate drilling for new cabinet doors or drawer fronts. The 6-15/16 inch overall length gives generous hand clearance along the face, which helps when lining up multiple pulls on wide drawers. A 1-1/2 inch projection establishes how far the pull stands off the cabinet, giving fingers room to grip without contacting the door surface. The 5/8 inch width defines its visual profile on stile or rail, which matters when matching to surrounding door frames. The oil rubbed bronze finish ties into common bronze hinge and knob selections for a consistent run.
The 160 mm center to center drilling dimension aligns with common cabinet boring patterns, making it practical when replacing existing 160 mm pulls on doors or drawers. The 6-15/16 inch overall length helps position the pull relative to door edges, which supports even reveals on tall doors. A 1-1/2 inch projection indicates the stand-off from the face, giving enough grip space for fingers between the pull and the cabinet surface. The 5/8 inch width guides how the pull sits on narrow rails or wider drawer fronts, which matters when spacing multiple pulls on large drawers. The specified 8-32 x 1 inch screw size defines the threaded interface, which ties the zinc pull securely through typical cabinet material thicknesses.
The Dierdra Series 6-5/16 inch (160 mm) center to center oil rubbed bronze pull is suited to cabinet doors and drawers that are already bored or planned at 160 mm spacing, so it works in layouts built around that standard. The 6-15/16 inch overall length helps it span medium to wider drawer fronts, giving a clear gripping area across the panel. With a 1-1/2 inch projection, the pull stands off enough from the face of the cabinet for fingers to wrap behind, which is useful on thicker drawer fronts. The 5/8 inch width sits comfortably on common stile widths in kitchen or bath cabinetry, keeping the pull visually centered without overwhelming narrow frames. The oil rubbed bronze finish allows the pull to visually align with similar-toned hinges, knobs, and other decorative hardware in the same space.
The 160 mm center to center measurement on this Berenson 9565-1ORB-P pull allows consistent drilling templates across a run of cabinets, which supports straight lines of handles along upper and lower banks. The 6-15/16 inch overall length gives installers a fixed reference from end to end, helping align pulls at equal distances from door edges or drawer sides. A 1-1/2 inch projection stabilizes the handhold depth so every door and drawer in the series feels the same during daily use. The 5/8 inch width also repeats the same visual band on each front, which reduces layout guesswork when mixing doors and drawers in one wall. The zinc construction and oil rubbed bronze finish defined in the product data provide a consistent material and appearance across multiple pulls, supporting uniform results in larger cabinet projects.
The Dierdra 160 mm center to center size specifies the distance between mounting holes, guiding drilling and making it suitable for cabinets set up on that spacing.
The Berenson 9565-1ORB-P pull has a 6-15/16 inch overall length, which helps plan edge clearances and alignment on doors and drawers.
The pull has a 1-1/2 inch projection, setting how far it stands off the cabinet face for finger clearance and grip comfort.
The Berenson Dierdra zinc pull is 5/8 inch wide, defining its visual footprint on stiles or drawer fronts during layout.
The Dierdra Series cabinet pull is made of zinc, providing a specified base material under the oil rubbed bronze finish.
This 6-5/16 inch cabinet pull uses 8-32 x 1 inch screws, giving a standard thread and length for typical cabinet fronts.
The Berenson Dierdra cabinet pull in oil rubbed bronze brings a defined 160 mm center to center drilling pattern, making it practical for cabinets laid out on metric spacing. Its 6-15/16 inch length, 1-1/2 inch projection, and 5/8 inch width give clear sizing for layout on doors and drawers. The zinc construction with an oil rubbed bronze finish from Berenson Corporation sets both material and appearance for coordinated decorative hardware runs. Order this pull when a 160 mm center to center zinc handle in oil rubbed bronze matches your cabinet plan.
Sold In: 1 Each