Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 8600B 16 drawer slide is a 16 inch, side mount, full extension ball bearing slide, so drawers travel fully out of the cabinet and stay supported under load. This matters when you need full access to residential or commercial furniture, commercial storage, or retail store display drawers without bending around a partially hidden interior. The slide uses a telescopic action, so movement is smooth along its length, which helps drawers operate consistently in daily-use environments.
The 8600 series slide is unhanded, so the same member works on either side of the drawer, which simplifies layout and reduces part sorting during installation. Its zinc finish provides a clean, neutral appearance that blends with most cabinet interiors. The slide is classified as a side mount drawer slide, aligning with common cabinet construction and allowing straightforward integration into typical casework designs.
The 8600B 16 slide uses side mounting, so it fits between the drawer side and cabinet side panel, working well with standard carcass layouts. A listed clearance of 0.51 inch plus 0.01 inch to 0 inch on each side defines the side-to-side space, guiding drawer box sizing to achieve proper running fit. The slide height of 1.98 inch, or 50.4 mm, sets the vertical space required on the drawer side, which matters when stacking multiple drawers or working near fixed shelves or rails.
The hole pattern supports both 32 mm and traditional face frame mounting, so the slide aligns with system line boring as well as more conventional face frame layouts. Recommended fasteners are #7 x 1/2 inch Phillips truss head, which aligns with typical cabinet fabrication practice and supports secure attachment in wood-based materials.
The Knape and Vogt 16 inch full extension standard ball bearing drawer slide from the 8600 series is designed for residential and commercial furniture, commercial storage, and retail store displays, so it fits a wide range of cabinet shop and fixture projects. Its 150 lb load rating on the 8600 model gives it capacity for files, tools, or bulk items in storage drawers, while still suiting everyday residential cabinetry.
The side mount design places the slide along the drawer sides, which suits common plywood or particleboard drawer boxes. Because the slide is unhanded, one configuration works for either side, helping streamline installation on runs of multiple drawers where efficiency matters. The telescopic slide configuration allows the members to extend fully while maintaining support, which is important in deeper storage or display drawers where users pull contents to the front edge.
The 16 inch length pairs naturally with cabinet depths that support full drawer extension without overtravel, which is useful for furniture pieces and casework where clearances behind the cabinet are limited. The zinc finish provides a neutral look that sits quietly behind drawer sides, supporting use in projects where hardware visibility needs to stay understated. The slide is sold under the Knape and Vogt brand, which aligns it with established cabinet hardware lines often specified in professional millwork packages.
The butterfly lever disconnect allows the drawer member to separate from the cabinet member, which simplifies installing and removing drawers during fitting, finishing, or service. This helps when adjusting reveals or transporting casework, because drawers can be lifted off without dismantling the entire slide assembly. The 32 mm and traditional face frame mounting hole pattern ties directly into common shop drilling patterns, which supports accurate, repeatable mounting across large runs of cabinetry.
The clearance of 0.51 inch plus 0.01 inch to 0 inch on each side provides a concrete dimension for sizing drawer boxes relative to the opening, reducing trial-and-error when cutting parts. With a slide height of 1.98 inch [50.4 mm], the installer can plan drawer side heights and vertical spacing so there is enough room for the hardware while still optimizing storage space.
The slide action is described as telescopic, which means the members nest and extend smoothly along their length, supporting controlled movement even when loaded up to the stated 150 lb rating. A limited lifetime warranty on the slide backs its long-term use in residential or commercial environments. The slide meets or exceeds ANSI performance standards established by BIFMA, BHMA, and KCMA, tying it to recognized criteria for durability and operation in furniture and cabinet hardware, which matters when hardware is specified for contract or commercial projects.
The 8600B 16 is a Knape and Vogt 16 inch full extension standard ball bearing side mount drawer slide, so it supports drawers that need full travel and smooth action along the side of the box.
The 8600 series slide has a 150 lb load rating, so it can handle heavier residential or commercial storage drawers where contents add significant weight during everyday use.
The 8600B 16 slide offers both 32 mm and traditional face frame mounting hole patterns, which works with system line boring and more conventional face frame cabinet construction.
The slide uses 0.51 inch plus 0.01 inch to 0 inch clearance on each side, guiding drawer box sizing so the drawer runs smoothly without binding or excessive play.
The recommended fasteners for the 8600B 16 slide are #7 x 1/2 inch Phillips truss head, which are suited to securing the slide members to common wood-based cabinet materials.
The 8600B 16 slide uses a butterfly lever disconnect, allowing the drawer member to release from the cabinet member for easier installation, finishing, or service access.
The Knape and Vogt 8600B 16 drawer slide combines full extension, a 150 lb load rating, and side mount installation with 32 mm and traditional face frame mounting options, so it fits well into residential and commercial cabinet work. Its unhanded configuration, telescopic ball bearing action, and defined 0.51 inch plus 0.01 inch to 0 inch side clearance support predictable drawer sizing and smooth operation. For projects calling for a 16 inch zinc finish slide that aligns with BIFMA, BHMA, and KCMA performance standards, this model offers a clear, documented option.
Sold In: 5 Set
