KV8600 28" Full Extension Standard Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Bulk-Pack - 8600B 28

Knape And Vogt 28 Inch Drawer Slides For Demanding Use

Knape and Vogt 28 inch drawer slides give you a full extension slide that pulls the drawer completely out of the cabinet opening, which helps installers and users access the entire drawer space without wrestling around the frame. These 8600 Series ball bearing slides use a telescopic action, so each member nests smoothly as the drawer opens and closes, supporting consistent movement under load. The product is classified as a side mount drawer slide, meaning it fastens directly to the cabinet sides and drawer sides, which suits straightforward, repeatable layouts in casework and furniture. An unhanded configuration lets the same member work on either side, simplifying layout and reducing part sorting on the bench. The slides are designed for residential and commercial furniture, commercial storage, and retail store displays, so they can be specified across mixed projects without changing models every time.

Key 8600B 28 Slide Details That Support Projects

• The 8600B 28 full extension slide has a 150 lb load rating, so drawers in furniture, storage, or displays can be built with confidence that the slide is engineered to carry substantial weight in normal service.
• The ball bearing drawer slide design uses a telescopic action, which lets drawers open and close with controlled travel, important when users are loading or unloading heavier contents in commercial settings.
• The slide mounts on the side of the cabinet and drawer, so installers can work with familiar side mount geometry and straightforward shimming when aligning multiple drawers in a bank.
• The clearance of .51 inch plus .01 minus 0 inch on each side sets a clear case opening target, helping shops size drawer boxes accurately for smooth running without excessive side play.
• The slide height of 1.98 inches, or 50.4 mm, provides a known profile, which helps when stacking drawers vertically or coordinating with cutouts, rails, or internal components in the cabinet.
• The zinc finish provides a clean, metallic surface on the slide members, which is useful for projects where hardware visibility matters, such as retail store fixtures and open commercial storage.

Side Mount Drawer Slide Fit And Mounting Details

This Knape and Vogt 28 inch full extension slide is a side mount configuration, so it fastens directly to cabinet sides and drawer sides to form a stable channel for the drawer. A clearance of .51 inch plus .01 minus 0 inch on each side defines the relationship between drawer width and opening width, which matters when planning box dimensions in production. The slide height of 1.98 inches sets how much vertical space the slide occupies, which helps when designing tight drawer stacks or integrating structural rails. A 32 mm and traditional hole pattern supports both system holes and face frame layouts, so the same slide can be used in frameless cabinets and face frame work. Recommended fasteners are #7 x 1/2 inch Phillips truss head, which indicates the screw style and length that suits the slide holes and material thickness in typical cabinet construction.

Using 8600 Series Slides In Real Projects

Where 8600B 28 Slides Are Applied Effectively

The KV Models 8600 full extension and 8605 overtravel ball bearing drawer slides in 28 inch length are designed for residential and commercial furniture, so they fit into casework like dressers, credenzas, and utility cabinets that need full drawer access. They are also designed for commercial storage, which covers applications such as office storage pullouts or shop cabinets where drawers see frequent cycling and must keep alignment under load. Retail store displays are another stated use, so fixture builders can rely on the slide for merchandise drawers or behind-counter storage that must open fully in limited aisle space. A side mount drawer slide format works well in these scenarios because it uses accessible mounting surfaces, which supports consistent alignment across multiple units. The unhanded slide configuration simplifies stocking and assembly, since left and right positions use the same slide member in mirrored locations.

Details That Help Consistency, Adjustment, And Performance

The 8600B 28 heavy duty full extension slide has a 150 lb load rating, which supports heavier drawer constructions and contents in commercial storage or retail environments without changing to a different class of slide. A telescopic slide action with ball bearings allows each segment to extend smoothly, so drawers travel fully while distributing load through the members for long-term function. The clearance specification of .51 inch plus .01 minus 0 inch on each side gives a tight but practical tolerance, helping shops program or set up machinery for repeatable drawer sizing. A height of 1.98 inches defines the slide envelope, which is useful when combining these slides with stretchers, dust frames, or inset bottoms where vertical stacking is critical. The slide provides 32 mm and traditional hole patterns, so jigs or line boring equipment based on those standards can be used without reworking layouts. A butterfly lever disconnect allows the drawer member to release from the cabinet member, which simplifies installing or removing drawers during finishing, transport, or service.

Common Questions About 8600B 28 Drawer Slides

Select 8600B 28 Slides For Side Mount Projects

The Knape and Vogt 28 inch 8600B 28 full extension slide offers a side mount, unhanded ball bearing design with a 150 lb load rating, so it fits residential and commercial furniture, storage, and retail display work requiring complete drawer access. With defined clearance, a 1.98 inch height, zinc finish, and 32 mm plus traditional hole patterns, it supports consistent layout from design through installation. Choose this 8600 Series slide when a telescopic, heavy duty side mount solution is needed for drawers built around a 28 inch slide length.