Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 18 inch full extension drawer slides use a telescopic ball bearing action to carry drawers fully out of the cabinet, which lets you access the full drawer length on residential or commercial jobs. The 8600 Series side mount design positions the slide on the drawer sides, which suits furniture, commercial storage, and retail store displays where clear access and predictable travel are important. A 150 lb load rating on the 8600 model supports heavier contents often found in storage and display applications. The unhanded configuration lets each member work on either side, which simplifies layout and stocking. A zinc finish protects the steel slide surfaces, which supports smooth movement over time in typical indoor environments. The slide height of 1.98 inches sets a clear profile to plan drawer box dimensions around, which helps avoid interference and keeps drawers running square.
The 8600B 18 slide uses a side mount layout with a clearance of 0.51 inch plus 0.01 minus 0 inch on each side, which defines the side-to-side space required between the drawer and cabinet for proper operation. A height of 1.98 inches gives a fixed vertical dimension that affects where to locate the slide on the drawer side, which influences drawer box height and bottom reveal. The 32 mm and traditional hole patterns support mounting in systems that follow either line boring or face frame methods, which helps this slide fit into varied shop setups. Recommended fasteners are #7 x 1/2 inch Phillips truss head screws, which match the slide holes and help seat the members firmly against the cabinet and drawer sides.
The 8600 Series 18 inch slide is designed for residential and commercial furniture, commercial storage, and retail store displays, which aligns the slide performance with drawers that see frequent use in living spaces and public areas. The full extension action lets the drawer clear the cabinet front, which is useful where front-to-back access to stored items or merchandise is important. A side mount arrangement suits cabinets built for standard slide locations along the side panels, which keeps construction straightforward in typical casework. The unhanded configuration means each slide member can work on either side, which streamlines inventory and allows the same part to serve left or right applications across multiple projects.
The 0.51 inch plus 0.01 minus 0 inch clearance on each side gives a specific width tolerance, which helps cabinets and drawers built to that dimension run smoothly without binding or excess play. The 32 mm and traditional face frame hole patterns provide reference positions for mounting, which aids in repeatable installation when using system boring or jigs. A butterfly lever disconnect lets the installer separate the drawer member from the cabinet member, which simplifies fitting the drawer into the opening and can speed adjustments or removal during finishing. The telescopic configuration with ball bearings supports consistent travel under load, which helps drawers carrying up to the 150 lb rating stay aligned throughout opening and closing cycles. The limited lifetime warranty and performance that meets or exceeds ANSI standards from BIFMA, BHMA, and KCMA indicate the slide is built to recognized criteria, which supports long-term use in furniture, storage, and display applications.
The 8600B 18 slide is designed for residential and commercial furniture, commercial storage, and retail store displays, which aligns it with drawers that see regular use in those environments.
The 18 inch 8600 Series slide has a 150 lb load rating, which supports heavier drawer contents often found in commercial storage or display without overloading the slide.
The 8600B 18 is a side mount slide with 0.51 inch plus 0.01 minus 0 inch clearance on each side, which defines the drawer-to-cabinet width needed for proper travel.
The butterfly lever disconnect allows the drawer member to be separated from the cabinet member, which can simplify fitting, removal, and adjustments during construction or finishing.
The 8600B 18 slide has both 32 mm and traditional hole patterns, which supports installation in system-bored cabinets and in face frame work using more conventional layouts.
The zinc finish protects the slide surfaces for smooth movement, and the limited lifetime warranty indicates Knape and Vogt supports the slide for long-term normal use.
The Knape and Vogt 8600B 18 full extension side mount slide combines an 18 inch length, 150 lb load rating, and ball bearing telescopic action, which suits drawers in furniture, commercial storage, and store displays that need full access. The 0.51 inch plus 0.01 minus 0 inch side clearance, 1.98 inch height, and 32 mm and traditional hole patterns set clear construction and drilling targets, which support consistent casework across multiple units. Choosing this unhanded zinc-finished slide standardizes parts on your bench, which simplifies layout for repeat jobs using the same 8600 Series platform.
Sold In: 5 Set
