Amerock self-close 3/8 inset hinge is a semi-concealed face frame hinge designed for cabinet doors that sit 3/8 inch inset from the face frame. The hinge mounts on the face frame, so the installer gets a predictable reference surface for layout and alignment. Its semi-concealed design leaves only the functional portions visible when the door is closed, which keeps the hardware visually quieter on finished jobs. The hinge is built from steel, giving the component a solid metal construction that stands up to regular cabinet door use. A polished brass finish provides a bright brass appearance that matches polished brass cabinet pulls and knobs in the same project. This hinge is supplied in pairs, so door planning and layout can be done in standard door quantities across a run of cabinets.
This Amerock Corporation hinge uses a screw-on mounting style, so it fastens to the cabinet and door with #6 x 5/8 inch screws. The screw-on design allows the installer to position the hinge precisely on the face frame and edge of the door using standard drilling tools. With a projection of 5/8 inch and a width of 2-3/16 inch, the hinge footprint is defined, which aids in laying out rows of hinges with consistent clearances. A length of 2-3/4 inch gives a tall enough leaf for typical cabinet door stile dimensions, helping distribute door load along the edge. The self-close function pulls the door shut at the end of travel, which reduces the chance of doors resting slightly ajar after use.
The Amerock self-close 3/8 inch inset semi-concealed face frame hinge BPR34283 is suited to framed cabinet constructions that are built for 3/8 inch inset doors. Because it mounts to the face frame, it works wherever there is a defined face frame edge and a door that overlays by the designed amount before stepping back into the opening. The steel construction allows it to serve on typical kitchen, bath, or built-in cabinet doors that see repeated opening and closing throughout the day. Its polished brass finish gives it a visual match for cabinets using polished brass pulls or knobs, so it supports cohesive hardware selection on remodels or new builds using that finish. The 2-3/4 inch length and 2-3/16 inch width define a hinge size compatible with many standard cabinet door stile widths used in face frame cabinetry.
The 3/8 inch inset specification on this Amerock semi-concealed face frame hinge sets a clear design target for door and opening relationships, which streamlines layout when building or hanging multiple doors on a run of cabinets. The screw-on mounting with #6 x 5/8 inch screws provides a known fastener size, so drilling patterns and tooling can be standardized in the shop. A 5/8 inch projection gives a predictable stand-off when the door swings, offering repeatable clearance behavior near corners or appliance panels. The self-close feature means the hinge actively draws the door closed at the end of travel, which helps maintain a uniform closed appearance across many doors without relying on users to push every door fully home. The polished brass finish is consistent from hinge to hinge, so visible portions present a uniform look once all doors are hung.
The Amerock self-close 3/8 inset semi-concealed face frame hinge is designed for face frame cabinets using 3/8 inch inset doors, so it matches that framed cabinet layout.
The self-close function on this hinge pulls the door shut at the end of travel, so doors tend to rest fully closed, which improves visual alignment across multiple doors.
The BPR34283 hinge is made from steel with a polished brass finish, giving metal construction with a bright brass appearance suitable for polished brass cabinet hardware.
This Amerock face mount hinge is designed for a 3/8 inch inset door relationship, which matches common framed cabinet 3/8 inch inset layouts.
The Amerock BPR34283 hinge has a length of 2-3/4 inch, a width of 2-3/16 inch, and a projection of 5/8 inch, which defines its working footprint on the door and frame.
This Amerock screw-on hinge is specified for #6 x 5/8 inch screws, so drilling and bit selection can be set around that fastener size during cabinet work.
The Amerock self-close 3/8 inset hinge BPR34283 brings a defined 3/8 inch inset geometry, face frame mounting, and a self-closing action together in one steel hinge. Its polished brass finish supports projects built around polished brass cabinet hardware. With known dimensions of 2-3/4 inch length, 2-3/16 inch width, and 5/8 inch projection, this hinge gives cabinet shops and installers clear parameters for door sizing and frame clearances. For cabinet work that calls for a semi-concealed 3/8 inch inset face frame hinge in polished brass, this Amerock option is a direct, part-number-specific choice.