Amerock self-close 3/8 inset face mount hinge describes a semi-concealed hinge that mounts to a face frame and closes the door without a separate catch, which streamlines cabinet construction for projects needing clean lines and repeatable door positioning. The 3/8 inch inset detail identifies this hinge for doors that partially overlay the opening while sitting partly inside the face frame, which helps keep reveal lines consistent on traditional framed cabinets. Its semi-concealed hinge style means part of the hinge is visible when the door is closed, which gives installers an exposed reference point when aligning multiple doors visually along a run. Being a face mount hinge ties this part directly to face-frame cabinet construction, which matches the workflow many shop and jobsite installers follow for framed kitchen, bath, and utility cabinetry layouts.
The face mount hinge designation points to a hinge that fastens directly on the surface of the cabinet face frame, which lets installers lay out screw positions from the frame edge and repeat that pattern across multiple openings. The screw-on wording in the product name highlights a mechanical installation method with screws, which suits production shops and field installers who rely on straightforward drilling and driving processes. The 3/8 inch inset measurement defines how far the door edge sits into the opening, which guides hinge placement relative to the frame edge so door gaps track consistently from cabinet to cabinet. Because the hinge is semi-concealed, installers can view part of the hardware while adjusting door position, which supports on-site tweaking of reveals during final fit-out.
This product sits in the hinges, semi-concealed face-frame hinges, and face mount hinges categories, which positions it squarely for framed cabinet construction rather than frameless layouts. The Amerock Corporation branding and the BPR3428G9 manufacturer part number identify a specific hinge pattern, which helps shops match existing installations or repeat a successful spec on new projects. Its 3/8 inch inset specification makes it suited for cabinet doors designed to sit partially inside the face frame opening, which is common on many traditional and builder-grade kitchen cabinets. As a semi-concealed hinge, it leaves part of the hardware visible when the door is shut, which pairs well with cabinet designs that call for a modest amount of exposed metal at the edge instead of fully concealed hardware. The face mount style means the hinge engages directly with the front frame of the cabinet, which aligns with the way many woodshops machine and assemble face-frame boxes using standard rail and stile dimensions.
The self-close behavior identified in the description indicates that the hinge pulls the door shut at the end of travel, which helps doors seat firmly against the frame and reduces the need for separate catches in typical cabinet installations. The 3/8 inch inset callout gives installers a clear dimension to match with door sizing and edge work, which supports repeatable reveals and consistent margins during a run of cabinets. Because this hinge belongs to the semi-concealed hinges product class, its geometry is tuned for that partial-visibility role, which simplifies replacement when an existing cabinet already uses a similar Amerock pattern. The manufacturer part number BPR3428G9 gives a precise reference for reorders or service work, which aids facilities, millwork shops, and contractors tracking hardware standards across multiple jobs.
The hinge is listed under face mount hinges and semi-concealed face-frame hinges, so it fits cabinet projects built with a face frame where hinges mount directly to the frame front.
The 3/8 inch inset value defines how far the door sits inside the opening, guiding door sizing and hinge placement so reveals remain consistent across the cabinet run.
The self-close detail indicates the hinge pulls the door into the closed position at the end of swing, helping doors stay shut without a separate catch in normal cabinet use.
This product is classified as a semi-concealed hinge, so part of the hinge remains visible when the door is closed, supporting traditional cabinet styling and visual alignment.
The BPR3428G9 manufacturer part number points to this exact Amerock self-close 3/8 inch inset face mount hinge, helping buyers match or reorder the same hinge pattern.
The face mount style means the hinge attaches on the face frame surface, so installers reference front frame edges when laying out screw locations and hinge positions.
The Amerock self-close 3/8 inch inset face mount hinge, identified by part number BPR3428G9, ties directly to semi-concealed face-frame cabinet construction, which suits many shop-built and production cabinet lines. Its self-close action and 3/8 inch inset geometry define how the door meets the opening, which supports predictable reveals when planning door sizes and hinge locations. For projects built around face mount hinges and semi-concealed styling, this Amerock hinge offers a clearly specified option that aligns cabinet layout, door movement, and hardware choice in a straightforward way.