Amerock self-close 3/8 inset face mount hinge describes a semi-concealed hinge that automatically pulls the cabinet door shut, which helps doors stay closed without separate catches on everyday face-frame jobs. The 3/8 inch inset overlay value defines how the door sits in relation to the face frame, which guides layout when matching existing hinges or planning new cabinet construction. The hinge is a face mount style, so it attaches on the surface of the face frame, which lets installers work from the front of the cabinet without routing or cup boring. The hinge is a semi-concealed hinge design, so only part of the hardware remains visible, which keeps the cabinet front cleaner while still allowing straightforward screw access. The satin nickel finish gives the hinge a muted metallic look, which helps it blend with satin nickel pulls and knobs across a project.
The screw-on description indicates the hinge fastens using screws, which lets installers position the hardware, drive fasteners, and make small shifts without specialized boring machines. The #6 x 5/8 inch screw size information defines the shank and length for each fastening point, which helps match pilot hole sizes and grip depth in common cabinet frame stock. The 2-3/4 inch length or diameter value gives the main body span, which helps when laying out hinge locations relative to rail widths and door edges. The 2-3/16 inch width dimension identifies how much face frame width the hinge leaf covers, which matters when working near narrow stiles or decorative edges. The 5/8 inch projection indicates how far the hinge assembly stands out, which influences door clearance and alignment against adjacent doors or panels.
The Amerock self-close 3/8 inch inset face mount hinge is part of a semi-concealed hinge family, which places it squarely in face-frame cabinet work where part of the hinge is meant to show. The 3/8 inch overlay or inset specification matches doors designed to sit partly inside the frame opening, which is common on traditional 3/8 inch inset face-frame kitchens and built-ins. The face mount configuration connects directly to the exterior of the frame, which works well on cabinets that do not use concealed cup hinges or require complex mortising. The steel construction supports typical residential and light commercial cabinet door use, which suits kitchens, baths, and utility cabinetry using comparable material thicknesses. The satin nickel finish helps this hinge visually match satin nickel pulls and knobs, which is useful when updating doors while keeping existing decorative hardware.
The self-close action built into this hinge closes the door through the final part of its swing, which promotes consistent door positions along a run of cabinets. The 3/8 inch inset value gives a fixed relationship between the door edge and the face frame, which allows repeat hole spacing and alignment across multiple doors using the same layout. The screw-on mounting method uses #6 x 5/8 inch screws, which allows installers to drive fasteners to a predictable depth for consistent clamping without over-penetrating typical cabinet materials. The 2-3/4 inch body length and 2-3/16 inch width dimensions define a repeatable footprint, which helps jigs or templates locate hinges the same way on each cabinet. The 5/8 inch projection value defines how far the hinge stands off the mounting surface, which aids in planning reveals and clearances to maintain even gaps between doors and frames.
The BPR3428G10 is a semi-concealed face mount hinge, which positions part of the hinge visible on the face frame while keeping much of the mechanism less noticeable on the cabinet.
The 3/8 inch inset sets the door so it sits partly inside the face frame opening by that amount, which is important when matching existing 3/8 inch inset cabinet layouts.
The self-close feature on this hinge pulls the door shut at the end of its swing, which helps doors rest firmly against the frame without separate catches on the cabinet.
This Amerock hinge is made from steel with a satin nickel finish, which provides a sturdy metal body and a muted metallic appearance for cabinet installations.
This face mount hinge is a screw-on style using #6 x 5/8 inch screws, which secures directly to the cabinet face frame from the front side of the cabinet.
The 2-3/16 inch width and 5/8 inch projection define how much frame surface the hinge covers and how far it stands off, which influences clearance and visible footprint.
This Amerock self-close 3/8 inset face mount hinge combines a steel body, semi-concealed design, and screw-on installation, which suits face-frame cabinets built for 3/8 inch inset doors. The satin nickel finish coordinates with satin nickel pulls and knobs, which keeps hardware appearance consistent across doors and drawers. The defined width, length, projection, and 3/8 inch inset values provide concrete layout numbers, which support repeatable hinge placement from cabinet to cabinet. For cabinet work matching 3/8 inch inset layouts and satin nickel hardware, this BPR3428G10 hinge offers the key dimensions and self-close function needed to plan and execute a straightforward installation.
Sold In: 1 Pair