Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock self-close 3/8 inset face mount hinge gives face-frame cabinet doors a controlled close using a semi-concealed design, so doors shut to a consistent position while most of the hardware stays out of sight. The 3/8 inch inset specification means the door edge sits partially inside the frame opening when installed, a common layout on many kitchen and bath face-frame runs. As a face mount hinge, this hardware attaches directly to the frame front, which simplifies layout on existing cabinets using that style. The steel construction provides a solid hinge body that supports regular cabinet door movement in typical shop and home environments. A satin nickel finish coordinates with many satin nickel pulls and knobs, helping hardware details line up visually across the job. The Amerock BPR7928G10 part number identifies this exact hinge style and finish for repeat ordering on future projects.
This Amerock Corporation semi-concealed hinge is a face mount design, so it fastens to the front of a face-frame cabinet rather than the interior panel. The 3/8 inch inset specification defines how the door edge relates to the frame, which guides door sizing and hinge placement for that layout. An 11/16 inch projection dimension describes how far the hinge extends from its mounting surface at its furthest point, useful when checking clearance against adjacent doors or trim. A width of 2-1/8 inches gives a sense of the hinge footprint along the frame, supporting planning around narrow stiles or tight face-frame layouts. Together, these dimensions outline how the hinge sits on the cabinet and how the door will move through its swing.
This semi-concealed hinge from Amerock Corporation is designed for face-frame cabinets that use a 3/8 inch inset door relationship to the frame. By combining a face mount layout with that specific inset, the hinge suits many traditional framed kitchen and bath installations built on that standard. The semi-concealed construction means only part of the steel hinge and satin nickel finish remains visible with the door closed, giving cabinets a cleaner appearance than fully exposed hinges while still showing a defined hardware line. The 2-1/8 inch width and 11/16 inch projection work with typical cabinet proportions, so the hinge pairs well with standard stile sizes and common door thicknesses used in interior woodworking projects. Because the hinge is classified as a face mount hinge within semi-concealed hinges, it naturally aligns with cabinet runs that already rely on that approach.
The self-close action built into this hinge helps bring each door back to a repeatable resting point, which supports even reveals along the face frame when multiple doors share the same 3/8 inch inset layout. Steel construction keeps the hinge geometry stable under regular use, so the 3/8 inch inset relationship between door and frame remains dependable over time. The 11/16 inch projection factor works together with the inset to define the door swing path, which is useful when planning the clearances between adjacent doors or between a door and nearby walls or appliances. The satin nickel finish on the visible portions of the hinge coordinates visually with satin nickel pulls and knobs, which supports a unified hardware look across doors and drawers. The Amerock BPR7928G10 identifier ties all of these details to one repeatable component, simplifying reorders when expanding a run or replacing hinges on matching cabinets.
This hinge is specified for 3/8 inch inset doors on face-frame cabinets, so it suits doors that sit partially inside the frame opening while leaving a consistent reveal on the front.
The face mount design attaches to the front of the cabinet frame, giving a clear, accessible mounting surface that supports straightforward hinge positioning along the face frame.
The self-close function on this hinge draws the door shut near the end of travel, helping doors finish in a closed position and improving consistency across multiple cabinet openings.
The 11/16 inch projection shows how far the hinge extends from its mounting surface, which helps plan clearance where doors open near walls, appliances, or neighboring doors.
The satin nickel finish lets this hinge visually coordinate with satin nickel pulls and knobs, supporting a unified hardware look across cabinet doors and drawer fronts.
The Amerock BPR7928G10 part number identifies this specific self-close 3/8 inch inset face mount hinge in satin nickel, which simplifies matching and reordering for ongoing work.
This Amerock self-close 3/8 inch inset face mount hinge brings together face-frame mounting, semi-concealed styling, and satin nickel finish for framed cabinet runs built around that inset layout. The defined 3/8 inch inset, 11/16 inch projection, and 2-1/8 inch width give clear reference points when planning door sizing and hinge spacing across a project. With its steel construction and integrated self-close action, this hinge supports consistent door movement and appearance on cabinets using the same configuration. For work calling for a repeatable 3/8 inch inset solution in satin nickel, this Amerock BPR7928G10 hinge provides a focused option to match that requirement.
Sold In: 1 Pair