Amerock self-close 3/8 inset hinge is a semi-concealed face mount hinge that controls how a cabinet door sits on a face frame, so doors align in a predictable 3/8 inch inset position. The hinge is designed as a face mount style, so it attaches to the cabinet face frame rather than a frameless panel, giving a familiar layout for traditional face-frame construction. This hinge is part of Amerock Corporation's line of semi-concealed hinges, so part of the hardware remains visible to guide door positioning while the working parts stay mostly covered. The steel construction provides a solid metal hinge body, so the hinge carries the door load through a durable steel arm and knuckle. A self-close function is built into this model, so the hinge actively pulls the door shut at the end of the swing, helping doors return to the closed position consistently.
This Amerock semi-concealed hinge is built from steel, so the hinge arms and leaves provide a sturdy mounting surface for cabinet doors. The steel material also supports repeated opening and closing loads on typical cabinet installations. The antique brass finish, described as Antique English and Antique Brass, establishes a traditional warm-toned surface on the visible hinge portions, so the hardware can tie into similar antique-style knobs, pulls, or other exposed hinges. A hinge width of 2 inches sets the coverage on the cabinet frame edge, giving a clear reference when laying out hinge spacing along the stile. The 3/4 inch projection dimension defines the distance the hinge and door assembly extend from the mounting surface, which is useful when planning door clearances at corners or near walls.
This Amerock self-close 3/8 inch inset face mount hinge is intended for face frame cabinet construction, where doors sit with a defined inset relative to the frame. The 3/8 inch inset overlay specification means the door edge rests 3/8 inch back from the front of the face frame, so this hinge suits layouts calling for that specific inset reveal. As a semi-concealed hinge, part of the hinge remains visible from the front of the cabinet, so it fits traditional or decorative cabinet designs where the hinge appearance contributes to the overall look. The antique brass finish provides a matching surface for cabinets using Antique English style hardware, so it can be paired with similar finishes across knobs, pulls, and other hinges in the same space. Because the hinge is a face mount type, it works with stiles and rails on framed cabinets, making it appropriate for many kitchen, bath, or built-in cabinet projects that use face frames.
The 3/8 inch inset specification on this Amerock semi-concealed hinge directly controls door position, so installers can repeat the same reveal from cabinet to cabinet by using the hinge as the layout reference. The self-close function built into the hinge assists the door at the end of travel, so doors are drawn back to the closed position instead of resting partially open. The 2 inch hinge width sets a stable bearing surface on the cabinet frame, so screw locations fall within a predictable footprint that resists twisting under door load. With a 3/4 inch projection, the hinge defines how far the door travels out from the frame, so planners can coordinate door swing near corners, fillers, or adjacent cabinets. The steel construction provides a rigid connection between frame and door, so hinge geometry remains consistent over time under normal cabinet use. The Amerock BPR7628AE model designation links this hinge to a specific geometry, finish, and inset, so future replacements can maintain the same door alignment and appearance.
The Amerock self-close 3/8 inch inset hinge is used on face frame cabinets where the door edge is positioned 3/8 inch back from the face frame for a defined inset reveal.
The face mount design attaches the hinge to the cabinet face frame, so hinge locations are referenced from the frame edges in typical face-frame construction.
The self-close feature on this Amerock hinge pulls the door into the closed position near the end of the swing, so doors finish closing without manual pressure.
The 3/4 inch projection shows how far the hinge and door stand out, so clearances at walls, corners, and adjacent doors can be planned around that distance.
The 2 inch width defines how much of the face frame the hinge covers, so screw placement and edge distances can be laid out within that footprint.
The antique brass finish, also described as Antique English, gives the visible hinge parts a warm traditional look that coordinates with similar finished cabinet hardware.
The Amerock self-close 3/8 inset hinge in steel with antique brass finish brings a defined inset layout, self-closing action, and semi-concealed styling together for face frame cabinets. By using the 3/8 inch inset specification, 2 inch width, and 3/4 inch projection, installers can plan door reveals and clearances around known hinge geometry. Choosing the BPR7628AE part number ties the project to this specific Amerock semi-concealed face mount hinge, so cabinet runs share the same door position, finish, and hinge look from opening to opening.