Amerock self-close 3/8 inset hinge defines this steel semi-concealed face mount hinge designed for 3/8 inch inset cabinet doors on face-frame construction, so it sets a clear fit target when planning cabinet layouts or matching existing hardware. The hinge is part of Amerock Corporation's semi-concealed face-frame hinge line, which means part of the hinge stays visible while the working parts tuck behind the door edge for a cleaner cabinet front. Its oil rubbed bronze finish establishes a dark, traditional look across the exposed portions, important when matching other oil rubbed bronze hardware in the same project. The screw-on face mount style lets the hinge fasten directly to the face frame using screws, which suits standard wood cabinet construction. As a self-close hinge, it pulls the door shut at the end of travel, helping doors stay closed once aligned correctly.
This face mount hinge uses a 3/8 inch inset configuration, so the front of the cabinet door sits 3/8 inch back from the front of the face frame, which affects how wide the door can be before edges meet. The hinge has a 2-3/4 inch length dimension, giving a reasonably long leaf for anchoring to cabinet material. Its 2-3/16 inch width dimension defines the spread of the leaves, which matters when laying out drilling patterns on narrow face frames or door stiles. A 5/8 inch projection value describes how far the hinge structure stands out from the mounting surface, guiding hinge spacing when doors sit near interior partitions or adjacent doors. The screw-on style uses #6 x 5/8 screws for attachment, so the pilot hole sizing and driving depth align with common cabinet building practice.
This Amerock BPR3428ORB hinge is built as a face mount hinge for face-frame cabinets using 3/8 inch inset doors, which makes it appropriate wherever the door front is stepped back from the frame edge by that amount. The semi-concealed hinge class means only part of the hinge is visible when the door is closed, so it fits cabinets where some traditional hinge presence is acceptable while still keeping most hardware out of sight. With its oil rubbed bronze finish, the hinge suits installations where the visible knuckle and leaf need to coordinate with other oil rubbed bronze knobs, pulls, or latches across a kitchen, bath, or built-in. Because the hinge is sold in pairs, it aligns naturally with typical door layouts that rely on a pair of hinges per standard cabinet door.
The 3/8 inch inset designation provides a fixed relationship between the door front and the face frame, which helps installers repeat door sizing and gap strategies across multiple cabinets without reworking layouts. The length of 2-3/4 inches and width of 2-3/16 inches create predictable hinge leaf footprints, so drilling jigs or templates can be set once and reused across repeated cabinet runs. A 5/8 inch projection measurement defines how far the hinge extends from mounting surfaces, allowing tradespeople to anticipate clearance at door edges and inside corners during layout. The self-close function integrated into this hinge helps doors return to the closed position after moving past a certain point, which supports uniform closing behavior once hinge positions are aligned. The Amerock Corporation branding and manufacturer part number BPR3428ORB tie the hinge to a specific catalog reference, simplifying specification documents, purchasing, and later replacement ordering.
The Amerock self-close 3/8 inset hinge is designed for 3/8 inch inset doors on face-frame cabinets, so the door front sits 3/8 inch back from the front of the frame.
The hinge's self-close feature pulls the door shut at the end of its swing, helping doors stay closed once the hinge and door are positioned correctly on the face frame.
The Amerock BPR3428ORB hinge is a face mount, screw-on hinge, so it fastens directly to the face frame and door stile using #6 x 5/8 screws in standard cabinet materials.
The 3/8 inch inset value sets how far the door front is recessed from the frame front, which guides door width, edge clearances, and hinge placement on face-frame cabinets.
The hinge has an oil rubbed bronze finish, so the visible portions present a dark, rubbed appearance that coordinates with oil rubbed bronze cabinet pulls and knobs.
The hinge lists a 2-3/4 inch length, 2-3/16 inch width, and 5/8 inch projection, giving installers clear size references for drilling patterns and clearance planning.
The Amerock self-close 3/8 inset hinge offers a defined 3/8 inch inset, semi-concealed face mount design, and an oil rubbed bronze finish, so it aligns with both layout and appearance requirements on many face-frame cabinets. Its 2-3/4 inch length, 2-3/16 inch width, and 5/8 inch projection give reliable physical reference points when planning drilling and clearances. Steel construction and screw-on mounting with #6 x 5/8 screws support use in common wood cabinet materials. For projects using 3/8 inch inset doors and oil rubbed bronze hardware, this Amerock BPR3428ORB hinge provides a consistent spec to apply across new work or replacements.
Sold In: 1 Pair