Amerock self-close 3/8 inset hinge describes a semi-concealed face mount hinge that uses a self-closing action to pull the cabinet door shut, which helps doors return to position consistently on everyday use cabinets. The 3/8 inch inset overlay detail sets the door so it sits partially inside the face frame, suiting traditional 3/8 inset cabinet layouts where a partial reveal around the door is required. The face mount design fastens directly to the face frame surface, giving installers a straightforward mounting approach on standard framed cabinets. The manufacturer designation as a semi-concealed hinge means part of the hinge is visible in use while functional elements stay less exposed, creating a familiar look for many replacement jobs. The Amerock Corporation branding and BPR7928ORB part number identify a specific hinge pattern that can be repeated across multiple doors for consistent alignment and appearance.
The stated 3/8 inch overlay inset geometry defines how far the door edge overlaps the face frame while still sitting partly inside the opening, which is important when matching existing 3/8 inset cabinet layouts. The 2-3/4 inch length dimension gives installers a clear sense of the hinge leaf reach along the door or frame, helping plan screw locations relative to door edges. The 11/16 inch projection measurement describes how far the hinge body stands off the mounting surface, which affects door swing clearance around face frames. The 2-1/8 inch width detail indicates the spread across the hinge, supporting layout decisions when spacing hinges vertically on taller doors.
The classification as a semi-concealed face-frame hinge anchors this hinge in framed cabinet work, where the hinge seats to the face frame rather than a frameless side panel. The 3/8 inch inset overlay specification aligns with cabinet doors designed to sit partially inside the opening while overlapping the frame by 3/8 inch, matching many traditional kitchen and bath door patterns. The face mount description confirms that the hinge fastens on the frame face, supporting layouts where the frame edge is the primary reference line for hinge placement. Because the hinge is semi-concealed, part of the hardware stays visible when the door is closed, which suits projects targeting a classic hinge look instead of a fully concealed style. The oil rubbed bronze finish pairs with this partially visible design, tying the hinge appearance into oil rubbed bronze knobs and pulls on cabinets using the same color family.
The self-close function described for this hinge brings the door toward the closed position at the end of travel, which promotes consistent closing behavior from door to door once hinges are set. The specific 3/8 inch inset overlay geometry creates a predictable relationship between the hinge position and the visible reveal, allowing installers to carry the same measurements from cabinet to cabinet for uniform gaps. The defined dimensions - 2-3/4 inch length, 11/16 inch projection, and 2-1/8 inch width - translate directly into drilling and layout decisions, reducing trial-and-error when planning hinge spacing on stiles and doors. The Amerock Corporation branding combined with the BPR7928ORB part number ties these mechanical and visual details to a single repeatable hinge pattern, which helps cabinet shops standardize on one hinge style for production runs and service replacements. The use of steel as the stated material provides a solid base for the hinge structure, supporting everyday cabinet door cycles in typical residential or light commercial settings where steel hardware is common.
The hinge is described as a semi-concealed face-frame hinge, which suits framed cabinets where hinges mount on the face frame rather than on a frameless side panel.
The 3/8 inch inset overlay sets the door so it partly overlaps the face frame by 3/8 inch while remaining partially inset, matching traditional 3/8 inset cabinet door layouts.
The self-close description indicates the hinge pulls the cabinet door toward the closed position near the end of travel, helping doors settle shut consistently.
The 2-3/4 inch length, 11/16 inch projection, and 2-1/8 inch width give clear size references, supporting accurate hinge spacing and clearance planning on doors and frames.
The oil rubbed bronze finish defines a dark, warm surface that coordinates hinge visibility with matching oil rubbed bronze cabinet hardware on the same project.
The BPR7928ORB part number identifies this specific Amerock hinge pattern, allowing shops to repeat the same model for consistent appearance and function.
The Amerock self-close 3/8 inset hinge configuration, with its face mount semi-concealed design, aligns directly with framed cabinets using 3/8 inch inset doors. The stated dimensions and steel construction support practical layout for door spacing, projection, and reveal on new builds and repeat projects. When an oil rubbed bronze finish and a known Amerock BPR7928ORB hinge pattern match the cabinet design, this hinge offers a defined geometry and look that can be carried across an entire run of doors for consistent results.
Sold In: 1 Pair