Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock self-close 3/8 inset hinge describes a semi-concealed face mount hinge designed for 3/8 inch inset doors on face-frame cabinets, so it matches common framed cabinet layouts in shops and job sites. The steel construction means the hinge body uses a metal that supports typical cabinet door loads in woodworking environments. The white finish provides a light, neutral appearance that coordinates with painted or white cabinetry where exposed hinge leaves are visible. This hinge is a screw-on style, so it attaches using screws through the hinge leaves rather than press-in fittings, which fits routine installation methods with standard drivers. The 2-3/4 inch length gives the hinge a compact footprint on the cabinet and door edges while still providing leverage for the self-close action. As a self-close hinge, it pulls the door shut at the end of travel, which helps doors rest consistently against the frame.
This hinge is specified as a screw-on type, meaning it uses screws through the hinge leaves into the cabinet frame and door, which works well with standard drilling and driving tools on site or in the shop. The screw size is listed as #6 x 5/8 inch, so the fastener diameter and length are sized for typical cabinet-grade material thicknesses without excessive penetration. Working with a known screw size supports predictable pilot hole sizing and repeatable fastening patterns on multiple doors. Because the hinge is a face mount design, layout occurs on the front of the frame, which lets installers visually align the hinge with reveals and door edges. The 3/8 inch inset specification guides the horizontal positioning of the door relative to the frame opening, which helps keep multiple doors in line across a run of cabinets.
This hinge is categorized under semi-concealed face-frame hinges and face mount hinges, so it is suited to cabinets that have a face frame rather than frameless construction. The 3/8 inch inset detail means the door front sits partially inside the frame opening by that amount, which aligns with many traditional kitchen, bath, and utility cabinet designs that use partial inset doors. Because the hinge is white, it visually blends into white or light-colored face frames and doors where the outer leaves remain visible when the door is closed. The width of 2-3/16 inches gives a modest footprint across the frame and door edges, which works with narrower face-frame members often found in residential cabinetry. With a projection of 5/8 inch, the hinge supports door swing that stays relatively close to the cabinet, useful where adjacent cabinets or appliances sit near the opening.
The manufacturer part number BPR3428W uniquely identifies this Amerock hinge, so shops and installers can repeat orders for the same component across multiple projects without re-specifying. The description as a self-close hinge indicates an internal mechanism that draws the door against the frame at the end of travel, which helps doors rest in a consistent closed position across a bank of cabinets. The steel material gives the hinge leaves and knuckle a rigid structure, supporting steady operation over normal cabinet use cycles in woodworking environments. This product is sold in pairs, which matches the common requirement of using two hinges per standard cabinet door in typical layouts. The note that both broken and full box quantities are available means projects ranging from a single door repair to larger cabinet runs can be supplied using the same hinge model. A discount for full box orders of 25 pairs supports bulk purchasing when outfitting multiple cabinets with a consistent hinge specification.
The hinge serves 3/8 inch inset doors on face-frame cabinets, so the door front sits partially inside the frame opening while still covering part of the face frame.
The hinge is described as a face mount, screw-on hinge, so it attaches to the face frame and door using screws driven through the hinge leaves.
The hinge is made from steel with a white finish, so it combines a metal body with a light-colored surface suited to white or painted cabinetry.
The 2-3/4 inch length and 2-3/16 inch width describe the hinge footprint, helping plan screw layout on the cabinet frame and door stile dimensions.
The self-close hinge design pulls the door into its closed position at the end of swing, helping doors rest consistently against the face frame.
The hinges are sold in pairs, and full box quantities are 25 pairs, which supports both small repairs and larger cabinet projects.
This Amerock self-close 3/8 inset hinge combines a face mount, screw-on design with steel construction and a white finish, so it aligns well with typical face-frame cabinet builds using 3/8 inch inset doors. The defined dimensions, projection, and screw size support predictable layout and fastening when planning cabinet runs or replacements. With pairs available in both broken and full box quantities of 25 pairs, this hinge fits jobs ranging from a single door to full-room cabinetry using a consistent hardware specification.