Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock self-close 3/8 inset hinge gives a face-mount option for semi-concealed cabinet doors, so the hinge mounts directly to the face frame while leaving part of the hinge visible. The 3/8 inch inset overlay controls how the door edge sits relative to the frame opening, helping keep reveals consistent on cabinets built to that specification. Its semi-concealed design leaves only the functional portions showing, which suits traditional and utility cabinetry where straightforward hardware is preferred. The hinge is sold in pairs, so each pair can be applied to a single door in typical cabinet layouts. This layout supports standard cabinet construction where two hinges per door balance the load and motion. Part number BPR3428FB identifies this specific hinge configuration for ordering or matching existing Amerock installations.
This Amerock face mount hinge is identified as screw-on, so it fastens to the cabinet and door with screws rather than with clips or dowels, giving installers a direct mechanical connection to wood substrates. The specified screw size of #6 x 5/8 inch defines the shank diameter and length, supporting common cabinet face frame and door stile thicknesses where this length engages solid material without excessive breakthrough. The 2-3/4 inch length dimension provides a reference for the overall hinge span, which helps when laying out hinge locations on narrow rails or stiles. The 2-3/16 inch width dimension indicates how much frame face the hinge covers, useful when checking clearance near adjacent doors or frame components.
This hinge falls under the category of semi-concealed face-mount hinges, so it is suited to face-frame cabinetry where part of the hinge is intended to remain visible along the frame edge. The 3/8 inch inset overlay specification ties it directly to doors built to sit partly inside the frame opening with a defined setback, so cabinets constructed around this common inset can use this hinge to maintain that geometry. With an overall length of 2-3/4 inches and a width of 2-3/16 inches, the hinge footprint works with many standard face-frame rail and stile sizes, helping avoid interference with panel profiles or neighboring doors. The hinge is manufactured from steel, giving a metal construction that supports typical cabinet door weights within the size ranges implied by its dimensions. Its flat black finish delivers a dark, uniform appearance that can visually frame lighter doors or blend into dark face frames, depending on the cabinet design.
The self-close function of this hinge pulls the door closed near the end of swing, which helps doors return to a consistent resting position against the frame, supporting even reveals over time. Because the hinge is screw-on, installers can set and adjust hinge placement using standard driving tools, which helps fine-tune door alignment along the face frame during installation. The 3/8 inch inset value remains constant from door to door when the same construction is used, so once the hinge position is established on one opening, that setup can be repeated, improving workflow on multi-door projects. The 5/8 inch projection dimension defines how far the hinge extends outward from the mounting surface, which can be factored in when planning door swing near adjacent cabinets or walls. Sold in pairs and with full box quantities of 25 pairs available, the ordering structure supports both small replacements and larger cabinet runs under the same part number BPR3428FB, simplifying repeat use on future work.
The Amerock self-close 3/8 inset hinge is a semi-concealed face mount design, fitting face-frame cabinets built for a 3/8 inch inset relationship between door and frame opening.
The 3/8 inch inset overlay sets how far the door edge sits inside the frame opening, helping installers maintain consistent reveals on doors built to that inset dimension.
The self-close feature on this hinge pulls the door shut near the end of travel, helping doors stay closed against the frame without relying solely on separate catches.
The hinge is made from steel with a flat black finish, providing a metal construction with a dark appearance that coordinates with other flat black cabinet hardware.
The 2-3/4 inch length, 2-3/16 inch width, and 5/8 inch projection guide placement on face frames and doors, supporting clearance planning near edges and adjacent components.
The BPR3428FB hinge is a screw-on design using #6 x 5/8 inch screws, creating a direct attachment to the cabinet face frame and door stile during installation.
This Amerock self-close 3/8 inset hinge from Wurth Baer Supply pairs a semi-concealed face-mount design with a flat black steel construction, matching cabinets built around a 3/8 inch inset requirement. With defined dimensions for length, width, projection, and #6 x 5/8 inch screw fastening, it provides clear benchmarks for layout and installation on face-frame doors. Sold in pairs and also available in full box quantities of 25 pairs, the BPR3428FB hinge supports both single-door replacements and larger projects under one consistent part number.
Sold In: 1 Pair