Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock self-close 3/8 inset hinge is a semi-concealed face mount hinge that supports 3/8 inch inset cabinet doors on face-frame construction, so doors sit correctly in relation to the frame for a consistent reveal across a run. The steel material provides a solid hinge body, giving the door a firm pivot point that handles frequent opening and closing in everyday cabinet use. The self-close function brings the door shut on its own over the last part of travel, which reduces slamming and helps doors rest in a repeatable closed position. The burnished brass finish adds a warm metallic look on the exposed hinge portions, coordinating with burnished brass knobs and pulls for a unified appearance across the installation. As a face mount hinge, it attaches directly to the face frame, which suits many traditional framed cabinet layouts.
This Amerock 3/8 inset face mount hinge uses a screw-on mounting style, so the hinge fastens to the cabinet face frame and door stile using screws for a secure mechanical connection. The screw-on approach allows the installer to position the hinge leaves on the frame and door using standard layout marks, then drive the screws to lock the hinge in place. The hinge projection of 5/8 inch describes how far the door and hinge extend from the mounting surface, which affects how the door clears adjacent components or trim when swinging open. A hinge width of 2-3/16 inch defines the leaf dimension across the mounting surface, helping installers plan drilling or pilot hole locations relative to door and frame edges.
The Amerock BPR3428BB hinge belongs to the semi-concealed face mount hinge class, fitting cabinets where part of the hinge is meant to show on the face frame while the rest is hidden behind the door. Its 3/8 inch overlay or inset value lines up with doors bored or sized for 3/8 inch inset on a face frame, so when the hinge is mounted, the door edge sits back from the frame front by the intended amount. In framed cabinet runs that mix drawers and doors, this consistent 3/8 inch relationship helps keep lines uniform, which is important when aligning multiple openings across a long bank of cabinets. Because it is categorized as a face mount hinge, it is directed at cabinets that rely on the front frame as the hinge reference surface rather than side panels.
The steel material used in this Amerock self-close 3/8 inset face mount hinge provides a rigid base for the knuckle and leaves, so once the hinge is set on the frame and door with screws, it resists flexing that can throw off reveals. The self-close function assists the final portion of door travel, so doors return to the same closed position against the cabinet each time, supporting consistent alignment between neighboring doors on a wall or base run. The burnished brass finish gives the exposed parts of this semi-concealed hinge a coordinated look when paired with burnished brass knobs or pulls, reducing visual mismatch between functional hardware and decorative pieces. Dimensions such as the 5/8 inch projection and 2-3/16 inch width help installers anticipate clearances near face frames, end panels, and adjacent doors, which reduces layout adjustments once hinge locations are established. The Amerock branding and BPR3428BB part number identify this specific configuration of self-close, 3/8 inch inset, burnished brass steel hinge for repeat orders or matching across a project.
The Amerock BPR3428BB hinge suits face-frame cabinets using 3/8 inch inset doors, so the door edge sits back from the frame front in a controlled, repeatable way across the installation.
The self-close feature on this Amerock hinge pulls the door shut during the final part of travel, which helps doors seat consistently and reduces partially open positions in everyday cabinet use.
The 3/8 inch inset specification means the hinge is designed for doors that sit 3/8 inch back from the cabinet face frame front, helping maintain uniform reveals along a cabinet run.
The 5/8 inch projection defines how far the door assembly extends from the mounting surface, which affects clearance near adjacent cabinets, trim pieces, or appliances during door swing.
The burnished brass finish gives the visible parts of this semi-concealed hinge a warm brass tone, allowing it to coordinate with burnished brass pulls and knobs on the same cabinets.
The steel construction provides a solid hinge body and knuckle, supporting door movement through repeated openings while helping the hinge maintain alignment on the face frame and door.
The Amerock self-close 3/8 inset face mount hinge in burnished brass combines a steel semi-concealed body, self-close action, and 3/8 inch inset geometry for framed cabinets using 3/8 inch inset doors. Its 5/8 inch projection and 2-3/16 inch width provide clear dimensional references when planning door swing and hinge layout on face frames. When a project calls for burnished brass hardware and consistent 3/8 inch inset reveals, this Amerock BPR3428BB hinge offers a defined set of dimensions and functions to match that cabinet design.
Sold In: 1 Pair