Amerock Self-Close 3/8" Inset Semi-Concealed Face Frame Hinge, Screw-on Polished Chrome - BPR792826

Amerock Self-Close 3/8 Inset Hinge For Cabinets

Amerock self-close 3/8 inset hinge defines this semi-concealed face frame hinge as a practical option when you want doors to pull shut without separate catches. The hinge is part of Amerock Corporation's semi-concealed hinge class, so the knuckle shows while the mounting flanges sit on the face frame for straightforward layout on framed cabinet construction. Its 3/8 inch inset design positions the door edge back from the face frame, which suits traditional partial inset doors where you want consistent reveals. This model uses a face mount style, so it installs onto the front of the frame rather than a concealed cup, fitting jobs that stay with classic surface-mounted hardware. The hinge is identified by manufacturer part number BPR792826, giving an exact reference when you need to match existing Amerock hardware on a run of doors or reorder for repeat projects.

Key Amerock Hinge Details That Support Cabinet Work

• The steel material gives the hinge a solid base that handles regular cabinet door movement, which matters on busy doors that see constant opening in kitchens, shops, or workrooms.
• The polished chrome finish provides a bright metal look that suits chrome-forward projects, and its smooth surface pairs cleanly with matching pulls and knobs along a cabinet line.
• The semi-concealed face frame design leaves part of the hinge visible while the rest sits against the frame, which helps align doors by using the hinge leaf edges as visual guides on the face frame.
• The 3/8 inch inset specification sets the door position relative to the frame front, so once you build or order doors to that inset, the hinge supports consistent alignment from door to door.
• The 11/16 inch projection value defines how far the hinge brings the door out from the mounting plane, which helps you anticipate clearance around adjacent doors and nearby components.
• The 2-1/8 inch width dimension gives a sense of hinge leaf coverage on the frame, which helps you plan screw locations away from narrow rails and potential weak spots.

Face Mount Semi-Concealed Hinge Fit And Setup

This Amerock semi-concealed face mount hinge fastens to a face frame construction, so the hinge leaf sits on the front of the frame while the door leaf mounts to the door edge for a traditional semi-exposed look. The self-close function is built into the hinge, so as the door approaches the closed position, the mechanism pulls it against the frame and holds it shut, which can reduce the need for separate catches on standard cabinet doors. The 3/8 inch inset specification ties directly to door sizing, so doors are built to sit partially inside the frame opening, giving a stepped appearance where the door edge is set back from the frame front. With a 2-3/4 inch length or diameter measurement referenced for the hinge, installers can plan coverage along the door edge so the hinge anchors into solid material and lines up across multiple doors in a bank.

Using The Amerock BPR792826 Hinge In Cabinet Runs

Where This Amerock Semi-Concealed Hinge Fits Best

The Amerock Corporation BPR792826 hinge fits face frame cabinets that use partial inset doors built to the 3/8 inch inset standard, which is common in many framed kitchen and built-in installations. Because the hinge belongs to the semi-concealed hinge class, it suits projects where a traditional exposed knuckle is acceptable, yet you still want the mounting flanges tucked against the frame rather than fully surface-mounted straps. The steel construction serves cabinets in residential or shop environments where doors are opened repeatedly, since the hinge body is built from metal rather than a lighter construction. Its polished chrome finish works on cabinets that carry chrome or bright hardware throughout, helping door hinges visually match existing pulls, knobs, or latches for a consistent hardware line on a single job.

Hinge Dimensions That Support Repeatable Door Alignment

The hinge width of 2-1/8 inches and projection of 11/16 inches provide working dimensions that help installers space doors and set reveals across a full cabinet run. Using the 3/8 inch inset value, fabricators can size doors so edges meet face frames at the same setback, which supports repeatable layout when drilling and mounting each hinge. The face mount configuration allows the hinge to register right on the frame front, so the straight edges of the hinge leaves act as reference points to keep doors square to the cabinet opening. The self-close action helps bring the door to a consistent resting position against the frame each time, which supports uniform gaps and contact points once hinges are set. The identified screw size length or diameter of 2-3/4 inches offers a reference dimension for planning fastener engagement into wood members, helping each hinge seat firmly and keep alignment over time.

Common Questions About This Amerock Cabinet Hinge

Select This Hinge For 3/8 Inset Face Frame Work

The Amerock self-close 3/8 inset hinge in polished chrome gives cabinet builders a steel semi-concealed option that matches partial inset face frame layouts. With defined dimensions, a face mount configuration, and self-closing action, it supports predictable door alignment on framed cabinets. When you need a repeatable hinge choice identified by Amerock part BPR792826, this model from Wurth Baer Supply fits projects calling for 3/8 inch inset doors with a bright chrome hinge presence.